通用紅外線遙控器
With Temperature & Humidity Sensor
使用者手冊
*使用前請仔細閱讀本說明書並妥善保存以供日後參考。
產品介紹：
Universal IR remote control with temperature and humidity sensor can remote control the IR home appliances such as TV, Air-conditioner, TV box, light, Fan, Audio, etc by mobile app. Also can real-time monitor the temperature and humidity on App at anytime and anywhere.
產品介紹：
筆記： 紅外線無法穿透牆壁，因此請確保紅外線遙控器和紅外線設備之間沒有障礙物。
°C &°F FOR OPTION (on the screen):
Press the button once and the temperature units on the screen will switch-.
DRY: 0%-40%RH COMFORT: 40%-65%RH WET: 65%~99%RH
產品規格
輸入音量tage：DC5V 1A
Wi-Fi standard: 2.4GHz IEEE 802.11 b/g/n
紅外線頻率：38kHz
Infrared range: <10 Meters
測量範圍：-9.9°C~60°C，0%RH~99%RH
Measure accuracy: ±1°C ±5%RH
工作溫度：-9.9℃~60℃
工作濕度：<99%RH
尺寸：66*66*17mm
使用設備前的清單：
a. Your smartphone has connected to a 2.4 GHz Wi-Fi network
b. Should input the correct Wi-Fi password.
c. Smartphone system version must be Android 4.4 + or iOS 8.0+.
d. Wi-Fi router should be MAC-open.
e. If the numbers of devices connected to the Wi-Fi router reach the limit, you can try to disable a device to cavate the channel or try with another Wi-Fi router.
ow to set up:
- Use the smartphone to scan QR code, or search “Smart Life” op in Google Play Store or APP Store to download app and stall.
https://smartapp.tuya.com/smartlife - 使用電子郵件地址註冊應用程式。
- Connect mobile phone to Wi-Fi router, turn on the bluetooth in mobile phone open smart life app and choose” + Add Device press and hold the button with 5 seconds → the WiFi icon will indicate on sensor display. Then will see “Discovering devices” on mobile app. Finally press “Go to Add”, it will connect the Wi-Fi network automatically.
- Tap “IR+TH”, then click “Add”, select the IR device select related applicance Quick Match Choose the brand of the IR deviceManual Mode to match at least 3 buttons of such applicance in APP to check if the device reacts properly. Once fully matched, the device can be controlled on the APP. If you add the devices with same brand and same type in one room, please edit the device with different names to avoid control confusion.
- 如果在品牌清單中找不到裝置品牌，您可以選擇「DIY」來學習其遙控器的按鍵功能，從而控制裝置。 （學習完一個按鍵後，可以點選「+」繼續學習其他按鍵，或點選「完成」）。
筆記：
a. It only support 38KHz frequency, if the IR remote unable to receive commands from the IR device, then the frequency of IR device may not match, so unable to study commands.
b. DIY does not support voice control.
功能
- 創建場景
Create smart scene for IR devices, click” Scene” page, ther click”+” at the upper right corner to set conditions and tas
- 共享裝置
You can share the added devices with your family members, on they can also control the devices.
- 監測溫度和濕度
You can real-time monitor the temperature and humidity on he App, and take actions to make some adjustments if ecessary.
°C & °F for option on the APP (Click on the temperature value on switch °C/°F units)
- 第三方語音控制
適用於亞馬遜 alexa 和谷歌助手。
尖端
- IR remote can control different devices as follow:
Like TV, Air-conditioner, Fan, DVD, TV box, Light, Set top box, Projector, Audio, Camera, Water Heater, Air purifer, etc… - 安裝注意事項。
紅外線無法穿透牆壁，因此請確保紅外線遙控器和紅外線設備之間沒有障礙物。 - Why IR remote not support Huawei/Xiaomi set top box?
There are two types of set-top boxes, OTT and IPTV, the most obvious difference is that IPTV supports living streaming while OTT does not. Please make sure you have matching TV box before set-up. - Reasons for unable to use IR remote to control device.
1. To check IR remote is powered on or not.
2. To check mobile phone is connected to 2.4GHz wifi network or not.
3. To check network connectivity, make sure the router is working properly.
4. To check input correct wifi password.
5. To check same wifi be used with IR remote and applicance. - 溫度和濕度注意事項。
配置完成後，需要 30 分鐘才能準確完成。
文件/資源
 |
Suntec SR-THD Universal IR Remote Control With Temperature and Humidity Sensor [pdf] 使用者手冊 SR-THD Universal IR Remote Control With Temperature and Humidity Sensor, SR-THD, Universal IR Remote Control With Temperature and Humidity Sensor, Temperature and Humidity Sensor, Humidity Sensor |