Elecrow ESP32 AI Camera Development Board Vision Sensor Board

設備零件

1. 揚聲器頭
2. RGB燈
3. 艾爾巴頓
4. MIC
5. UART頭
6. TF卡插槽
7. 相機
8. 輔助燈
9. 重置按鈕
10. 揚聲器
11. Type-C介面
12. 電源燈
13. 電池燈
14. BAT Header

快速指南

• Al Button:
  • In “Al Voice” mode, click to toggle the “Standby/Listening” status.
• 重置鍵：
  • Single-click to reboot after firmware flashing failure or device malfunction.
• 電源燈：
  • The red LED is on steadily when powered.
• 電池燈：
  • When powered by the battery, the red light stays on while charging, and the green light stays on when fully charged.

網絡配對

1. Plug in the Type-C cable to power on.
2. If you want to use the “Al Online” feature, you need to network pair and register the Al Agent first.
3. Open your phone/computer’s WiFi list, click on “Al_Camera_XXXX” to enter WiFi pairing mode.
   • 如果 webpage does not open automatically, please visit 192.168.4.1 in your browser.
4. Choose an available 2.4GHz WiFi, enter the WiFi password, and click “Save Configuration”.
   • You can see your Wifi in “WiFi Network”.
   • 筆記： If you want to clear your network, open the “Settings” app, then open the “Configure Network”, and click “RECONFIGURE”.
5. Open the “Al Online” app, then open a browser and go to https://portal.thinknode.cc/ to access the Al Hub interface. If this is your first time logging in, you need to click the “Create Account” button to create an account.
6. After the account is successfully created and logged in, you will receive a 5000-point reward.
7. Click the “Al Hub” button to start “Add Agent”.
8. Click “Add Agent” and give your Al Agent a name.
9. Click “Manage devices (0)”, then click “Add Device”, enter the verification code, and confirm.
10. After completing “Add Device”, you can configure the character.
11. If you want to browse “Historical conversations”, you need to first enable “Local Short-term Memory” and save.
    • 筆記： If your 5000 points are used up, you need to click “Recharge” to purchase a plan that will allow you to regain points.

主要規格

• 產品名稱： Al Camera Module
• 主控制器 ESP32-S3R8
• 展示 1.83-inch TFT-LCD Touch Screen
• 像素 2 議員
• 無線的 WiFi & Bluetooth 5.0
• 閃光 16MB
• TF卡插槽 最高支持128GB
• 介面 UART Interface. IC Pad
• 輸入 5V/1A
• 方面 56.05*44.5*18.6毫米
• 工作溫度 -20°C 至 65°C

文件/資源

Elecrow ESP32 AI Camera Development Board Vision Sensor Board [pdf] 使用者指南 ESP32 AI Camera Development Board Vision Sensor Board, ESP32, AI Camera Development Board Vision Sensor Board, AI Camera Development Board Vision Sensor Board, AI Camera Development Board, Camera Development Board, Vision Sensor Board, Sensor Board

參考

• 使用者手冊