介紹
This manual provides instructions for the installation, operation, and maintenance of the Olympia D-820T Overflow and Waste Drain Trim Kit. This kit is designed to enhance the functionality and appearance of your bathtub drain system. Please read these instructions thoroughly before beginning installation or use.
產品結束view
The Olympia D-820T Trim Kit includes the following components:
- Overflow Snap-In Cap (Chrome finish)
- Push & Pull Strainer Group (Chrome finish)
This trim kit is specifically designed for use with Olympia D-820R-PVC and D-820RS-PVC drain bodies. The overflow cap design doubles the overflow drain capacity compared to traditional screw-face plates.

Image: The Olympia D-820T Overflow and Waste Drain Trim Kit, showing the chrome overflow snap-in cap (top) and the chrome push & pull strainer (bottom).
設定和安裝
This trim kit is intended to be installed over an existing compatible Olympia D-820R-PVC or D-820RS-PVC drain body. Ensure you have the correct drain body before proceeding.
- 準備浴缸: Ensure the bathtub is clean and free of debris around the overflow and drain openings.
- Install Overflow Snap-In Cap: Align the overflow snap-in cap with the overflow opening on the bathtub. Press firmly until the cap snaps securely into place over the existing overflow drain body. Ensure a tight fit to prevent leaks.
- Install Push & Pull Strainer: Insert the push & pull strainer into the main drain opening. The strainer is designed to fit into the existing drain body. Ensure the rubber gasket on the strainer creates a seal with the drain opening. Some minor adjustments or a rubber mallet may be needed for a snug fit. Do not overtighten or force components excessively.
- 測試洩漏: Fill the bathtub with water and check both the overflow and main drain for any signs of leakage. Operate the push & pull strainer several times to ensure proper sealing and drainage.
If you are unsure about any step of the installation process, it is recommended to consult a qualified plumber.
手術
The D-820T Trim Kit features a push & pull strainer for controlling water drainage.
- 關閉排水管: Press down firmly on the top of the strainer. This will seal the drain, allowing the bathtub to fill with water.
- 打開排水管: Pull up on the top of the strainer. This will unseal the drain, allowing water to flow out.
The overflow snap-in cap functions automatically to prevent the bathtub from overflowing by directing excess water into the drain system.
維護
Regular cleaning will help maintain the appearance and functionality of your Olympia D-820T Trim Kit.
- 打掃: Use a soft cloth and mild, non-abrasive cleaner specifically designed for chrome finishes. Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
- 定期檢查: Periodically check the strainer and overflow cap for any buildup of hair or debris that might impede drainage. Clean as necessary.
- 墊片檢查: Ensure the rubber gasket on the push & pull strainer remains intact and provides a good seal. Replace if worn or damaged.
故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| Strainer does not seal properly / Bathtub drains slowly. | Debris under the strainer gasket; worn gasket; improper installation. | Remove strainer and clean gasket and drain opening. Check gasket for damage and replace if necessary. Re-install strainer ensuring a snug fit. |
| Overflow cap is loose or leaks. | Improper snap-in installation; damaged overflow cap. | Ensure the overflow cap is fully snapped into place. Inspect for damage and replace if needed. |
| Trim kit does not fit the existing drain. | Incompatible drain body; incorrect model purchased. | Verify that your existing drain body is an Olympia D-820R-PVC or D-820RS-PVC. This trim kit is designed specifically for these models. Contact Olympia support for compatibility questions. |
規格
- 模型: D-820T
- 品牌: 奧林匹亞
- 材料: 金屬
- 顏色: 鉻合金
- 物品重量: 6.7 盎司
- 包裝尺寸: 4.53 x 4.21 x 3.23 英寸
- 相容性: Designed for Olympia D-820R-PVC & D-820RS-PVC drain bodies.
保固和支持
For warranty information or technical support regarding your Olympia D-820T Overflow and Waste Drain Trim Kit, please refer to the official Olympia web或聯絡其客服部門。請保留購買收據,以便進行保固索賠。
Olympia Customer Service: 請訪問 the Olympia Store on Amazon or the official Olympia web聯繫方式的網站。





