一、簡介
The Fosi Audio SP601 is a 2-way passive bookshelf speaker designed for high-fidelity audio reproduction in home theater, desktop computer, or dedicated listening room setups. It features Fosi Audio's exclusive HybridCone composite woofers and silk dome tweeters, engineered to deliver clear, open, and layered sound with striking accuracy and emotional depth. The minimalist design ensures it blends seamlessly into various environments.
2. 盒子裡裝的是什麼？
開箱後請檢查包裝內容：
- 1 Pair of Fosi Audio SP601 Bookshelf Speakers
- 1 Pair of Magnetic Grilles
- 1 本使用手冊
3. 產品結束view
The Fosi Audio SP601 speakers are meticulously designed for both sound performance and aesthetic appeal. Key components include:
- 6.5" HybridCone Composite Woofers: These woofers combine the warmth of paper with the clarity of aluminum, featuring a cast aluminum trim ring, aluminum cone, rubber surround, paper cone, T-pole plate, spider (damper), aluminum basket, voice coil, washer, and ferrite magnet for enhanced bass control and fast transients.
- 1.5" Silk Dome Tweeters: Paired with full-cast aluminum waveguides, these tweeters deliver crisp, wide, and airy treble.
- Dual-Mode Binding Posts: Support both banana plugs and bare wires for a secure and reliable connection to your amp擴音器。
- Precisely Tuned Bass Reflex Ports: Refined through hundreds of tests to deliver cleaner, more balanced sound.
- Magnetic Detachable Grilles: Minimalist yet elegant design, easy to remove and clean.
4. 設定
To set up your Fosi Audio SP601 speakers, follow these steps:
- 放置： Position your speakers in your desired listening area. For optimal stereo imaging, ensure they are equidistant from your listening position and angled slightly inward (toe-in).
- 連接到 Amp強化劑： The SP601 speakers are passive and require an external amplifier. Use high-quality speaker wire to connect the speakers to your amplifier的揚聲器輸出。
- 使用香蕉插頭： Insert the banana plugs into the center hole of the binding posts.
- Using Bare Wire: Unscrew the binding post nuts, insert the bare wire into the hole, and tighten the nuts securely. Ensure no stray wire strands are touching each other or the other terminal to prevent short circuits.
- 注意極性： 將揚聲器的正極 (+) 連接到電源的正極 (+)。 amp將擴大機的負極（-）端連接到揚聲器的負極（-）端。 amp放大器。極性接反會導致音質變差和低音響應減弱。
- 開機： 所有連接都牢固後，打開電源。 amp放大器和音頻源。
5. 操作說明
一旦正確連接到 amplifier and audio source, operating your Fosi Audio SP601 speakers is straightforward:
- 確保您的 amp揚聲器已開啟且音量已設定為較低等級。
- Select the appropriate input source on your amp擴音器。
- Begin playing audio from your source device (e.g., computer, streamer, turntable).
- 逐漸增加音量 amp將音量調整到您想要的聆聽音量。
For optimal sound quality, allow the speakers a 'break-in' period of several hours of playback at moderate volume. This allows the driver surrounds to loosen up and perform optimally.
6、維護保養
To ensure the longevity and optimal performance of your Fosi Audio SP601 speakers:
- 打掃： Use a soft, dry cloth to wipe down the speaker cabinets. For the magnetic grilles, they can be easily removed for cleaning with a soft brush or vacuum cleaner attachment. Avoid using harsh chemicals or abrasive cleaners.
- 放置： 請將音箱遠離陽光直射、熱源和潮濕環境。確保音箱周圍通風良好。
- 格柵： The magnetic grilles protect the drivers. You may choose to listen with them on or off, depending on your preference. They are designed for easy removal and reattachment.
7。 故障排除
If you encounter issues with your Fosi Audio SP601 speakers, refer to the following common problems and solutions:
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 揚聲器沒有聲音 | 接線錯誤； Amplifier off; Wrong input selected; Source device issue | 檢查揚聲器線連接是否極性正確且牢固。確保 amplifier is powered on and correct input is selected. Verify audio source is playing. |
| 聲音失真或不清晰 | Loose connections; Damaged speaker wire; Overdriving amplifier/speakers; Incorrect speaker placement | Check all connections. Inspect speaker wire for damage. Reduce amplifier volume. Adjust speaker placement for better acoustics. |
| 低音不足 | Incorrect polarity; Speaker placement | Ensure speaker wire polarity is correct (+ to + and - to -). Experiment with speaker placement, moving them closer to walls or corners can sometimes enhance bass. |
| 一台揚聲器不工作 | Loose connection; Faulty speaker wire; Amp放大器通道問題 | Check connections for the non-working speaker. Swap speaker wires between channels on the amp使用擴大機來確定問題是出在揚聲器上還是揚聲器上。 amp利器通道。 |
8. 規格
Detailed technical specifications for the Fosi Audio SP601 Bookshelf Speakers:
| 特徵 | 規格 |
|---|---|
| 揚聲器類型 | 2-Way In-Room Bookshelf Speakers |
| Woofer Size and Material | 6.5-inch Paper Inner Cone with Aluminum Alloy Outer Layer |
| Tweeter Size and Material | 1.5-inch Silk Dome Tweeter |
| 均方根功率 | 80W |
| 峰值功率 | 160W |
| 標稱阻抗 | 4Ω |
| 揚聲器靈敏度 | 84分貝 |
| 頻率響應 | 44Hz-20KHz（-10dB） |
| 格柵類型 | Magnetic Wooden Frame with Fabric Mesh |
| 尺寸（高 x 寬 x 深） | 352.5mm × 210mm × 290mm (13.88"H x 8.27"W x 11.42"D) |
| 重量 | 每個揚聲器 6.5 公斤 |
| 櫃體材質 | 木頭 |
| 頻道 | 2 (2.0) |
| 電源 | 無（被動） |
| 電池 | 不 |
| 防水的 | 不 |
| 支持APP | 不 |
9. 用戶提示
- 顏色選擇： The SP601 speakers are available in various colors (e.g., black, white, orange, silver). Always confirm the specific color option you are purchasing, as product images may showcase different variants.
- Amp匹配器： While the speakers have a peak power of 160W, ensure your amplifier's RMS output is appropriately matched to the speaker's 80W RMS power and 4Ω impedance for optimal performance and to prevent damage.
- 室內聲學： Experiment with speaker placement and room treatments to achieve the best sound quality for your specific listening environment.
10. 保固和支持
For detailed warranty information, technical support, or service inquiries, please refer to the official Fosi Audio website or contact their customer service directly. A comprehensive user manual in PDF format is also available for download, which may contain additional information and diagrams:
