WINDHORSE W3

WINDHORSE 電動自行車 W3 型使用手冊

型號:W3

一、簡介

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your WINDHORSE Electric Bike Model W3. Please read this manual thoroughly before your first ride and retain it for future reference.

WINDHORSE Electric Bike Model W3

Image 1.1: The WINDHORSE Electric Bike Model W3, a compact e-bike with a rear basket and dual suspension.

2. 安全訊息

Always prioritize safety when operating your electric bike. Adhere to all local laws and regulations regarding electric bicycle use. Wear a helmet and appropriate safety gear. Ensure the bike is in good working condition before each ride.

  • 年齡建議: Suitable for individuals aged 14 and above.
  • 重量限制: 請勿超過最大負重能力 330 磅 (150 公斤)。
  • 天氣狀況: Avoid riding in heavy rain or extreme weather to prevent damage to electrical components and ensure rider safety.
  • 速度限制: Be aware of and comply with local speed regulations. The default factory speed setting is 15.5 MPH. Adjusting the top speed should only be done in accordance with local laws.

3. 設定和組裝

Your WINDHORSE W3 Electric Bike comes largely pre-assembled. Follow these steps for final assembly and initial preparation:

  1. 拆箱: Carefully remove all components from the packaging. Verify all included items are present: bike frame, basket, pedals, charger (adapter and AC line), tool kit, reflectors, and user manual.
  2. 踏板安裝: Identify the left (L) and right (R) pedals. Thread the pedals into the crank arms. The left pedal threads counter-clockwise, and the right pedal threads clockwise. Tighten securely with the provided tool.
  3. 座椅調整: Adjust the seat height to a comfortable and safe riding position. Ensure your feet can touch the ground when stopped. The seat is height-adjustable to accommodate various rider heights.
  4. 車把調整: The handlebar is foldable. Ensure it is securely locked in the upright position before riding.
  5. 籃子附件: Attach the rear basket to the designated mounting points above the rear wheel. Ensure it is securely fastened.
  6. 初始電池電量: Before your first ride, fully charge the battery. Connect the charger to the bike's charging port and then to a power outlet. Charging typically takes 4-5 hours. The battery is UL 2849 certified.
WINDHORSE Electric Bike W3 Package Contents

Image 3.1: Contents included in the WINDHORSE Electric Bike W3 package: adapter, AC line, tools, pedals, manual, reflector, and the bike itself.

Adjusting the seat height on the WINDHORSE Electric Bike

Image 3.2: A person demonstrating the height-adjustable seat feature of the WINDHORSE W3 electric bike.

4. 操作說明

騎乘前請熟悉電動自行車的操控裝置和功能。

4.1 開關機

Insert the key into the ignition. Turn the key to the 'ON' position to activate the electric system. Turn the key to the 'OFF' position to power down the bike. The bike can also be ridden as a traditional bicycle when powered off.

4.2 騎乘模式

The WINDHORSE W3 offers two primary riding modes:

  • 踏板輔助系統(PAS)模式: When the bike is powered on and you begin pedaling, the motor will provide assistance, making pedaling easier. The level of assistance may be adjustable via the display.
  • 純電動模式(油門): Engage the throttle to propel the bike without pedaling. This mode provides full motor power up to the set speed limit.

You can also pedal and use the throttle simultaneously for an additional boost.

4.3 照明系統

To activate the headlight, turn the key twice to the far right. The bike is also equipped with a rear reflector for enhanced visibility. Ensure lights are functional for nighttime riding.

WINDHORSE Electric Bike Safety Lights System

Image 4.1: Illustration of the safety lights system, showing the bright front headlight and rear reflector for visibility.

4.4 制動

The bike features dual disc brakes for reliable stopping power. Apply both front and rear brakes smoothly and evenly to maintain control. Test brakes before each ride.

WINDHORSE Electric Bike Front and Rear Disc Brakes

圖 4.2:特寫 view of the front and rear disc brake design on the WINDHORSE electric bike, highlighting strong braking ability.

5、維護保養

定期保養可確保您的電動自行車的使用壽命長久且安全運作。

  • 電池保養: Charge the battery regularly, even if not in use, to maintain its health. Avoid completely draining the battery. Do not expose the battery to water or extreme temperatures.
  • 輪胎氣壓: 每次騎乘前請檢查輪胎氣壓。保持建議氣壓,以確保最佳性能和安全。
  • 煞車檢查: Regularly inspect brake pads and discs for wear. Ensure brake levers operate smoothly and provide adequate stopping power. Adjust or replace components as needed.
  • 一般清潔: Keep the bike clean. Use a damp cloth to wipe down the frame and components. Avoid using high-pressure washers directly on electrical parts.
  • 緊固件檢查: 定期檢查所有螺栓和緊固件的緊固情況,特別是車把、座管、車輪和煞車等關鍵零件。

6。 故障排除

本節介紹您可能遇到的常見問題。如果您遇到的問題未在此列出,請聯絡客戶支援。

問題可能的原因解決方案
自行車無法啟動Battery low or depleted; Key not fully turned; Loose battery connectionCharge battery; Ensure key is in 'ON' position; Check battery connections.
Motor not assisting (PAS)PAS sensor issue; Brake lever engaged; Low batteryCheck PAS sensor for obstructions; Ensure brake levers are fully released; Charge battery.
油門不工作Low battery; Loose throttle connection; Faulty throttleCharge battery; Check throttle wiring; Contact support if issue persists.
煞車感覺沒勁煞車片磨損;煞車線鬆脫;液壓系統內有空氣(如有)Inspect and replace brake pads; Adjust brake cable tension; Consult a bike mechanic for hydraulic systems.

7. 規格

Detailed technical specifications for the WINDHORSE Electric Bike Model W3:

WINDHORSE Electric Bike W3 Dimensions and Specifications

Image 7.1: Diagram illustrating the dimensions and key specifications of the WINDHORSE W3 electric bike, including recommended height and load capacity.

特徵規格
型號名稱W3
自行車類型電動自行車
引擎500W 無刷輪轂馬達(峰值功率 715W)
最大速度22 英哩/小時(35 公里/小時)
Max Range (Electric-only)長達 20 英里(32 公里)
最大射程(PAS 模式)長達 35 英里(56 公里)
電池36V 8.0Ah 288Wh Lithium Battery (UL 2849 Certified)
充電時間4-5小時
車輪尺寸14英寸
鏡框材質碳鋼
懸掛類型雙(前和後)
煞車方式碟式煞車(前輪和後輪)
最大負載能力330 磅(150 公斤)
自行車重量50.7 磅(23 公斤)
建議用戶身高5.2-6.2英尺
包含的組件Basket, Manual, Reflectors, Tool Kit

8. 保固

The WINDHORSE Electric Bike Model W3 comes with a limited warranty. Please refer to the warranty card included in your package or contact customer support for specific terms and conditions.

9. 客戶支持

For any questions, technical assistance, or warranty claims, please contact WINDHORSE customer support:

WINDHORSE Customer Service Contact Information

Image 9.1: Contact information for WINDHORSE customer service, including website, email, and a QR code for direct contact.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.