Tangkula 32.5 Inch Propane Fire Pit Table Instruction Manual

1. 重要安全訊息

Please read and understand all safety warnings and instructions before assembling, operating, or servicing this fire pit table. Failure to follow these instructions may result in property damage, personal injury, or death.

僅限戶外使用： This fire pit table is designed for outdoor use only. Do not operate indoors or in enclosed spaces.
通風： Ensure adequate ventilation. Do not obstruct the flow of combustion and ventilation air.
清除： Maintain a minimum distance of 3 feet (0.9 meters) from sides and rear, and 6 feet (1.8 meters) from the top to any combustible materials.
兒童和寵物： Keep children and pets away from the fire pit table at all times, especially during operation.
燃料類型： Use only liquid propane (LP) gas. Do not use any other fuel.
瓦斯洩漏： Check for gas leaks before each use. Use a soapy water solution to check connections. Do not use an open flame to check for leaks.
點火： Follow the ignition instructions carefully. If the burner does not ignite within 5 seconds, turn the control knob to OFF, wait 5 minutes, and repeat the ignition procedure.
熱表面： The fire pit table and surrounding areas will be hot during and after use. Allow sufficient time for cooling before handling.
熔岩石： Do not completely cover the burner with lava rocks when igniting. Ensure lava rocks are dry before first use to prevent cracking.
防護罩： Do not use the protective cover until the burner has completely cooled down.
雨水曝露： Avoid prolonged rain exposure for extended service life.

2. 包裝內容

組裝前請確認所有零件齊全且完好無損。

1 x Fire Pit Table
1 x Bag of Lava Rocks
1 個保護蓋
1 x 使用說明書

3. 設定和組裝

Follow these steps to assemble your Tangkula Propane Fire Pit Table. It is recommended to have two people for assembly due to the weight of some components.

組裝影片指南

This video provides a visual guide for assembling the Tangkula Propane Fire Pit Table. It demonstrates the step-by-step process of connecting the side panels, installing the tank holder, and securing the tabletop.

逐步組裝

準備組件： Unpack all parts and lay them out on a soft, clean surface to prevent scratches. Identify the fire pit tabletop, side panels, bottom panel, and hardware.
組裝側面板： Connect the side panels to the bottom panel using the provided screws and tools. Ensure all connections are secure.
Install Tank Base Holder: Insert the tank base holder into the assembled frame and secure it according to the instructions. This holder is designed to fix a 20 lbs standard propane gas tank (not included).
安裝桌面： Carefully place the fire pit tabletop onto the assembled base. Align the holes and secure it with the appropriate fasteners.
Adjust Door Latch: The side door provides easy access to the propane tank. Adjust the screw on the door latch to ensure a secure and flush closure.

Open side door revealing propane tank access, tank base holder, gas regulator, and cut-out door handle.

Image showing the side door for propane tank access, the tank base holder, and the gas regulator. A 20 lbs standard propane gas tank is required (not included).

Close-ups of adjustable foot pads, removable lid with handle, and reinforced metal frame.

Image highlighting the adjustable foot pads for stability, the removable lid with a handle, and the reinforced metal frame for durability.

4. 操作說明

This section details how to safely ignite and operate your fire pit table.

連接丙烷罐

確保火盆控制旋鈕處於“關閉”位置。
Connect the gas regulator hose to the propane tank valve. Hand-tighten firmly.
緩慢打開丙烷罐閥門。
Check all connections for leaks using a soapy water solution. Bubbles indicate a leak. If a leak is detected, close the tank valve immediately and tighten connections. If the leak persists, do not use the fire pit and contact customer support.

Igniting the Fire Pit

Remove the lid from the burner area.
Ensure the lava rocks are evenly distributed around the burner, but do not completely cover the ignition electrode.
Push and turn the control knob counter-clockwise to the 'LOW' position.
Press and hold the igniter button until the burner ignites.
點火後，繼續按住控制旋鈕 10-15 秒，讓熱電偶加熱。然後放開旋鈕。
If the burner does not ignite within 5 seconds, turn the control knob to 'OFF', wait 5 minutes for gas to dissipate, and repeat the ignition process. If the fire does not ignite, try fanning the gas around the burner by hand to ensure adequate contact with oxygen.

Close-up of the control panel with ignition and flame adjustment knobs, showing low and high flame settings.

Image showing the control panel with ignition and flame adjustment knobs. The flame can be adjusted from low to high.

Fire pit with flames, showing 50,000 BTU heat output, lava rocks, and stainless steel burner.

Image illustrating the fire pit in operation, highlighting the 50,000 BTU heat output, the lava rocks, and the stainless steel burner.

調整火焰

Once ignited, rotate the control knob to adjust the flame height to your desired level (between 'LOW' and 'HIGH').

Shutting Down the Fire Pit

將控制旋鈕順時針旋轉至“關閉”位置。
關閉丙烷罐上的閥門。
Allow the fire pit and lava rocks to cool completely before placing the protective lid or cover.

5、維護保養

定期保養可確保您的火爐桌使用壽命長久且安全運作。

打掃

外表面： Clean the PE rattan and tempered glass surfaces with a soft cloth and mild soap solution. Rinse thoroughly and dry completely.
Burner and Lava Rocks: Periodically inspect the burner for debris. Clean lava rocks as needed by rinsing with water and ensuring they are completely dry before reuse.

貯存

When not in use, especially during inclement weather or off-season, cover the fire pit table with the provided protective cover. Store the propane tank in a well-ventilated area, away from direct sunlight and heat sources.

Fire pit with flames, highlighting black tempered glass, elegant PE rattan, and heat resistance/sunproof features.

圖片展示asing the materials: black tempered glass (heat resistant, easy to maintain) and elegant PE rattan (well-woven, sunproof).

6。故障排除

This section addresses common issues you might encounter with your fire pit table.

問題	可能的原因	解決方案
燃燒器不點燃	No gas flow, low gas pressure, clogged burner, faulty igniter.	Check propane tank level and valve. Ensure regulator is properly connected. Clear any obstructions from the burner ports. If the igniter is faulty, contact customer support. Try fanning gas around the burner by hand to ensure adequate oxygen contact.
火焰小或火焰不穩定	Low gas pressure, partially closed tank valve, excess flow safety device activated.	Ensure propane tank valve is fully open. Reset the excess flow safety device by closing the tank valve, disconnecting the regulator, waiting 30 seconds, and reconnecting. Open the tank valve slowly.
檢測到煤氣味	漏氣。	Immediately turn off the gas at the tank. Evacuate the area. Check all connections for leaks with soapy water. If the odor persists or leak cannot be found/fixed, do not use the fire pit and contact emergency services or a qualified gas technician.

7. 規格

材料： PE Rattan, Metal, Tempered Glass, Stainless Steel
外形尺寸： 32.5 英吋深 x 32.5 英吋寬 x 26 英吋高
Lid Dimension: 14.5吋長 x 14.5吋寬
Tank Base Holder Diameter: 9"
Weight Capacity of Tabletop: 220 磅
淨重： 55 磅
熱量輸出： 50,000 BTU
燃料類型： 液化石油氣（丙烷）
Required Propane Tank: 20 lbs standard (not included)

Diagram showing the dimensions of the fire pit table: 32.5 inches length, 32.5 inches width, and 26 inches height. Also indicates a maximum load capacity of 220 lbs.

Image displaying the key dimensions of the fire pit table and its maximum load capacity.

8. 保固和支持

This Tangkula product comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Tangkula customer service.

If you have any questions, require assistance with assembly, operation, or encounter any issues with your fire pit table, please contact Tangkula customer support for prompt assistance.