GarveeHome 12000 BTU Inverter Split System Air Conditioner User Manual

一、簡介

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your GarveeHome 12000 BTU Inverter Split System Air Conditioner. Please read this manual thoroughly before installation and use, and retain it for future reference.

The GarveeHome 12000 BTU Inverter Split System is a versatile unit designed for energy-efficient cooling and heating, suitable for spaces up to 750 square feet. It features inverter technology, multiple operating modes, and smart Wi-Fi control.

2. 安全訊息

重要安全說明：

• Installation must be performed by a qualified professional to prevent electric shock, fire, or serious injury.
• 確保電源符合設備的規格（115V）。
• Do not attempt to repair or modify the air conditioner yourself. Contact qualified service personnel.
• 保持室外機周圍區域暢通無阻，以確保空氣流通順暢。
• 請勿將任何物品插入出風口或進風口。
• 確保正確接地，防止觸電危險。
• Regularly clean air filters to maintain efficiency and air quality.

3. 包裝內容

安裝前請確認所有組件齊全。

圖 3.1：包裝清單 - This image displays the main components included in the package: the indoor unit, outdoor unit, copper connection pipes (air and liquid), power line, communication wire, drain pipe, remote control, user manual, tape, and putty.

• 室內機
• 室外機
• 13 ft Copper Connection Pipe (Air Pipe)
• 13 ft Copper Connection Pipe (Liquid Pipe)
• 8 英尺電力線
• 15 英尺通信線
• 6.5 ft Drain Pipe
• 遙控
• 用戶手冊（本文檔）
• 磁帶
• 魯廷（膩子）

4. 安裝指南

Installation of this split system requires specialized tools and knowledge. It is highly recommended that installation be performed by a certified HVAC professional.

4.1 室內機安裝

The wall for the indoor unit installation must be hard and firm to prevent vibration. Ensure adequate clearance around the unit for proper airflow and maintenance.

Figure 4.1: Indoor Unit Clearance Requirements - This diagram illustrates the minimum recommended distances from the indoor unit to the ceiling, side walls, and floor to ensure optimal operation and maintenance access.

1. 安裝板安裝： Drill holes and use appropriate screws to fasten the mounting plate horizontally and vertically on the wall.
2. Wall Hole for Piping: Create a wall hole (typically Ø60mm-Ø80mm) for refrigerant piping, ensuring it slopes slightly downward to facilitate drainage. Avoid pre-buried power wires or hard wall sections.
3. 電源線連接： Pass the power cable from the back of the indoor unit to the terminal board. Secure the cable with a clamp.
4. 管道連接： Connect the connecting pipes to the indoor unit. Aim at the pipe center, tighten the taper nut with fingers, then use a torque wrench to secure it according to the specified torque values (refer to the table in the video for pipe size and torque). Carefully check for any damage to joints before installation. Do not reuse joints unless re-flared.
5. Insulation and Sealing: Use insulation sleeves to wrap the joint parts of the indoor unit and connection pipes. Seal insulation material to prevent condensate water generation.
6. 排水軟管連接： Connect the water outlet with the drain pipe, ensuring the drain hose is straight and slopes downward.
7. Wrapping Pipes and Cables: Use plastic cable ties to wrap the connecting pipes, cables, and drain hose together. Run the assembly sloping downward.
8. Refrigerant Piping Through Wall: Carefully guide the wrapped refrigerant piping through the wall hole.
9. 室內機裝： Hang the indoor unit on the mounting plate. Move it from left to right to ensure the hooks are properly positioned.
10. Sealing Wall Hole: Install a pipe protecting ring and seal the wall hole with putty to prevent air and moisture infiltration.

4.2 室外機安裝

The outdoor unit should be installed in a location that meets the specified clearance requirements for optimal performance and maintenance.

Figure 4.2: Outdoor Unit Placement - This image shows the outdoor unit. Ensure adequate space around the unit for proper airflow: 50cm above, 10cm on the air intake side, 50cm to other obstructions, 30cm above the ground, and 200cm clear space for air discharge.

1. 安裝支架安裝： Use at least 6 expansion bolts to fix the mounting brackets firmly on the wall. Ensure the brackets are level.
2. Positioning Outdoor Unit: Carefully place the outdoor unit onto the installed brackets.
3. Securing Outdoor Unit: Use 4 screws to fix the feet of the outdoor unit onto the brackets.
4. Connecting Refrigerant Pipes: Remove the nuts from the stop valves. Aim at the pipe center of the stop valves and tighten the taper nuts with fingers. Then, use two wrenches to fully tighten the taper nuts.
5. 電氣連接： Remove the electrical box cover. Connect the cables respectively to the corresponding terminals of the terminal board of the outdoor unit (refer to the wiring diagram provided in the unit's documentation). Ensure the ground wire is securely connected. Fix all cables reliably with fasteners.
6. 系統抽真空： Fully open the handle Lo of the manifold valve and apply vacuum for at least 15 minutes. Check that the compound vacuum gauge reads -0.1MPa (-76cmHg).
7. Opening Stop Valves: After applying vacuum, fully open the stop valves with a hex wrench. Be sure to retighten the caps afterward to prevent potential air leakage.
8. Securing Caps: Screw all the caps back onto the stop valves and tighten them securely.

4.3 安裝影片指南

Watch this official installation video for a visual step-by-step guide on setting up your GarveeHome Mini Split AC system.

5. 操作說明

Your GarveeHome Mini Split AC offers various modes and features for personalized comfort.

5.1 遙控功能

Figure 5.1: Multifunctional Remote Control - This image displays the remote control for the GarveeHome Mini Split AC, highlighting its various buttons and functions for controlling the unit's modes and settings.

• 酷模式： 提供快速冷卻效果。
• 加熱模式： Offers fast heating.
• 乾燥模式： 一鍵烘乾模式，快速降低室內濕度。
• 僅風扇模式： Selectable low, mid, high, or turbo fan speeds with up to 50ft long-distance airflow.
• 顯示開/關： Toggles the unit's display.
• 睡眠模式： Adjusts temperature for comfortable sleep and quiet operation (41 dB). The remote display turns off automatically after 10 seconds of inactivity.
• ECO Energy Saving Mode: 優化運行，降低能耗。
• 自清潔： Initiates an automatic cleaning cycle.
• 攝氏度/華氏度： 可在攝氏度和華氏度溫度顯示之間切換。
• 24小時定時器： 設定定時器，實現自動開關機功能。
• 4D自動揮桿： Controls the automatic swing of the air deflector for wider air distribution.
• iFEEL 模式： 感應遙控器所在位置的溫度，實現精準舒適的調整。

5.2 Wi-Fi智能控制

Figure 5.2: Smart Control via App - This image illustrates the capability of controlling the GarveeHome Mini Split AC using a smartphone application, highlighting compatibility with Wi-Fi 2.0, Amazon Alexa, and Google Assistant.

The unit supports Wi-Fi 2.0 for smart control. Download the GarveeHome app (or compatible smart home app) to connect your unit. You can remotely adjust temperatures, change modes, and monitor your AC from anywhere. The system is compatible with Google Home for voice control.

5.3 Energy Efficiency and Performance

• 逆變器技術： Innovative inverter technology ensures optimal performance with up to 25% energy savings.
• 寬工作溫度範圍： Designed to perform in various environments, with low-temperature startup at -4°F (-20°C) and stable operation up to 140°F (60°C).
• 精確的溫度控制： AI intelligent sensing of ambient temperature allows for precise control within ±0.1°C.
• 安靜運作： Operates at a low noise level of 41 dB, ensuring a peaceful environment.

6、維護保養

定期保養可確保空調的使用壽命更長、運作更有效率。

6.1 過濾器清潔

Air filters should be cleaned regularly (e.g., every two weeks) to maintain optimal airflow and air quality.

1. 打開室內機前面板。
2. 拆下空氣過濾器。
3. 用吸塵器清潔過濾器，或用溫水清洗。
4. 務必讓濾芯完全乾燥後再重新裝入。
5. 關閉前面板。

6.2 自清潔功能

圖 6.1：自清潔過程 - This image depicts the internal self-cleaning mechanism of the indoor unit, which involves condensation, frosting, defrosting, and sterilization at 57°C to ensure clean air.

The unit features a 57°C high-temperature self-cleaning and sterilization function. Activate this mode via the remote control to ensure fresh and clean air by removing dust and bacteria from the evaporator.

6.3 季節性維護

• Before long periods of inactivity, run the unit in fan-only mode for a few hours to dry the internal components.
• Clean the outdoor unit's coils and fins to remove any debris that may obstruct airflow.
• Inspect refrigerant lines for any signs of leakage or damage.

7。 故障排除

聯絡客服前，請參考以下常見問題及解決方法。

如果嘗試這些方法後問題仍然存在，請聯絡合格的維修技術人員。

8. 規格

Key technical specifications for the GarveeHome 12000 BTU Inverter Split System Air Conditioner.

圖 8.1：產品尺寸和規格 - This image provides a visual overview of the indoor and outdoor unit dimensions, along with key technical data such as cooling capacity, SEER2 rating, and power requirements.

註：尺寸為近似值，可能略有偏差。

9. 保固和支持

For warranty information, please refer to the documentation included with your purchase or contact Garvee customer support. Protection plans may be available for extended coverage.

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Garvee customer support through their official channels.