BTF-LIGHTING ESP-32 WLED WiFi Controller SP803E Instruction Manual

一、簡介

This manual provides detailed instructions for the installation, operation, and maintenance of the BTF-LIGHTING ESP-32 WLED WiFi Controller SP803E. This controller is designed to manage various types of LED strips, offering advanced features such as Wi-Fi control, music synchronization, and dynamic lighting effects. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

Figure 1: BTF-LIGHTING SP803E Controller Overview

2. 產品結束view 及特色

The SP803E is an ESP-32 based WLED WiFi controller capable of managing up to 2048 pixels for RGB IC and RGBW IC LED strips. It supports both SPI addressable and PWM LED strips, offering versatile lighting control options.

主要特點：

• 廣泛的兼容性： Supports SPI Addressable LED strips (WS2811, WS2812, WS2815, SK6812 RGBW, WS2814 RGBW) and PWM Dimming LED strips (Single-color, CCT Dual White, RGB).
• 廣卷tag輸入： Compatible with DC5V, DC12V, and DC24V power supplies. Ensure the power supply voltage matches your LED strip's voltage.
• 三重安全保護： Includes reverse polarity protection, backfeed prevention, and data port surge protection for enhanced reliability.
• Music Dynamic Mode: Features a built-in microphone for real-time music synchronization, allowing LED effects to react to audio rhythms.
• LED Matrix Spectrum Effect: Configurable for rectangular LED matrices, enabling unique music spectrum visualizations with adjustable parameters like color, saturation, and direction.
• 2.4GHz Wi-Fi Control: Seamless control via the WLED app (WLED Native APP or WLED+ APP) on smartphones or tablets, without requiring an additional gateway.
• UART USB Type-C Port: For firmware updates and advanced configuration.

Figure 2: SP803E Product Details and Port Identification

3. 安全訊息

請遵守以下安全準則，以防止設備損壞或人身傷害：

• 卷tage 匹配： Always ensure the input power supply voltage (DC5V, DC12V, or DC24V) precisely matches the working voltage of your connected LED strip. Mismatched voltages will damage the LED strip or the controller.
• 電源供應： The packing list does not include a power supply. Use a certified power supply that meets the voltage and current requirements of your LED setup.
• 僅限室內使用： This device is designed for indoor use. Avoid exposure to moisture, water, or extreme temperatures.
• 目前容量： The controller has a total output capacity of MAX 12A. Ensure the total current draw of your LED strips does not exceed this limit.
• 反極性保護： While the controller has reverse polarity protection, always double-check wiring before applying power to prevent potential issues.
• Data Port Surge Protection: The data port includes surge protection, but it is still advisable to handle connections carefully.

4. 設定與安裝

4.1 LED控制器接線

Connect your LED strip to the SP803E controller according to the type of LED strip you are using. Ensure all connections are secure before applying power.

4.1.1 SPI Addressable RGB/RGBW LED Strip (One-wire Data)

For LED strips such as WS2811, WS2812B, SK6812 RGBW, etc., connect the Data line to the controller's DATA (IO16) terminal, GND to 接地, and VCC to 電壓控制電路. Ensure the power supply voltage matches the LED strip's voltage.

Figure 3: SPI Addressable One-wire Data LED Strip Wiring

4.1.2 SPI Addressable RGB LED Strip (Dual Wire Data)

For LED strips such as WS2815, SK9822, etc., connect the Data line to the controller's DATA (IO16) terminal, the Clock line (if applicable, though WS2815 is typically one-wire data with redundant data line) or a second data line to another available GPIO if configured, GND to 接地, and VCC to 電壓控制電路. Always refer to your specific LED strip's datasheet for exact wiring.

Figure 4: SPI Addressable Dual Wire Data LED Strip Wiring

4.1.3 PWM Single Color LED Strip

For single-color LED strips (e.g., FCOB, 5050, 5630, 3014, 3528), connect the positive (+) terminal of the LED strip to the controller's 電壓控制電路, and the negative (-) terminal to any of the PWM (IO25, IO26, or IO27) 終端。

Figure 5: PWM Single Color LED Strip Wiring

4.1.4 PWM CCT LED Strip

For CCT (Correlated Color Temperature) LED strips (e.g., FCOB CCT, 5050 SMD CCT), connect the common positive (+) terminal to the controller's 電壓控制電路. Connect the Warm White (WW) and Cool White (CW) terminals of the LED strip to two separate PWM (IO25, IO26, or IO27) terminals on the controller.

Figure 6: PWM CCT LED Strip Wiring

4.1.5 PWM RGB LED Strip

For RGB LED strips (e.g., FCOB RGB, 5050 SMD RGB), connect the common positive (+) terminal to the controller's 電壓控制電路. Connect the Red (R), Green (G), and Blue (B) terminals of the LED strip to the three PWM (IO25, IO26, and IO27) terminals on the controller.

Figure 7: PWM RGB LED Strip Wiring

4.2 Power Supply and Voltage 補充

For longer LED strip installations, voltage drop can occur, leading to dimming at the end of the strip. Consider voltage supplementation for optimal brightness.

4.2.1 Series Connection & Voltage 補充

When connecting multiple LED strip rolls in series, ensure the power supply output voltage 與 LED 燈條的工作電壓相符tage. For extended lengths, supplement power at intervals along the strip to maintain consistent brightness.

Figure 8: Series Connection with Voltage 補充

4.2.2 Parallel Connection & Voltage 補充

For parallel connections, a signal amplifier may be used to ensure consistent data signal integrity across multiple LED strips. Each parallel strip should receive its own power connection from the main power supply or a distribution block.

Figure 9: Parallel Connection with Voltage 補充

4.3 WLED App Configuration Steps

The SP803E controller is managed via the WLED app. Follow these steps to connect and configure your device:

1. 開機： Connect the controller to a suitable power supply. The indicator light will illuminate.
2. 連接到 WLED-AP： On your phone or tablet, go to Wi-Fi settings and connect to the Wi-Fi network named "WLED-AP". The default password is "wled1234".
3. 存取控制頁面： After a successful connection, your device should automatically redirect to the WLED control page in your browser. If not, manually enter 4.3.2.1 in your browser's address bar.
4. 設定 Wi-Fi 設定： Within the WLED interface, navigate to "WiFi Setup". Enter your home 2.4GHz Wi-Fi network name (SSID) and password. Tap "Save & Connect". The controller will restart and attempt to connect to your home network.
5. 在應用程式中新增設備： Open the WLED Native APP or WLED+ APP. Tap the "+" button to add a new device. You can use "Discover Devices" or manually enter the IP address of the controller (which can be found in your router's connected devices list after it connects to your home Wi-Fi).
6. 控制： Once added, select the controller from the list to enter the control interface and begin customizing your lighting.

Figure 10: WLED App Configuration Steps

5. 操作

5.1 WLED 應用程式控制

The WLED app provides comprehensive control over your LED strips. You can adjust colors, brightness, apply various effects, and manage segments.

• 顏色選擇： Use the color wheel or predefined color palettes to choose static colors.
• 動態效果： Select from a wide range of built-in dynamic effects to create various lighting moods.
• 亮度調節： Control the overall brightness of your LED strips.
• 分段控制： Divide your LED strip into multiple segments and apply different colors or effects to each segment independently.

圖 11：WLED 應用程式控制介面

Figure 12: Segmented Control in WLED App

5.2 Music Dynamic Mode

The built-in microphone allows the controller to synchronize lighting effects with music or ambient sounds. To activate:

1. Ensure the controller's microphone is not obstructed.
2. In the WLED app, navigate to the "Effects" section.
3. Select a music-reactive preset. The lights will now respond to sound.
4. For advanced customization, explore the "LED Preferences" or "2D Configuration" settings for LED matrix spectrum effects, adjusting parameters like color, saturation, and direction of the sound column.

Figure 13: Music Synchronization Feature

5.3 同步功能

On the same Wi-Fi network, multiple WLED controllers can be synchronized to display coordinated lighting effects. This is useful for larger installations or multiple rooms where a unified lighting theme is desired.

Figure 14: Synchronization Function in Action

6. 規格

7。 故障排除

If you encounter issues with your SP803E controller, refer to the following common problems and solutions:

• 無電源/指示燈熄滅：
  • Check power supply connection and ensure it is providing the correct voltage (5V, 12V, or 24V DC).
  • 請確認電源是否正常運作。
  • Ensure the power input terminals are correctly wired (VCC and GND).
• LEDs Not Lighting Up or Incorrect Colors:
  • Confirm the LED strip's working voltage 匹配電源電壓tage.
  • Check all wiring connections (Data, VCC, GND) between the controller and the LED strip. Ensure data direction is correct for addressable strips.
  • Verify the LED type and pixel count are correctly configured in the WLED app under "LED Preferences".
  • Ensure the correct GPIO pin is selected for the data output in the WLED app (IO16 for SPI, IO25/26/27 for PWM).
  • Test with a shorter length of LED strip or fewer pixels to rule out power delivery issues (voltage 滴）。
• Cannot Connect to WLED-AP Wi-Fi:
  • Ensure the controller is powered on and the indicator light is active.
  • Confirm you are selecting the correct Wi-Fi network "WLED-AP" and entering the default password "wled1234".
  • Try resetting the controller by holding the "KEY (IO0)" button for 10 seconds.
• Cannot Connect to Home Wi-Fi Network:
  • Ensure your home Wi-Fi is 2.4GHz. The controller does not support 5GHz networks.
  • Double-check the Wi-Fi SSID and password entered in the WLED app.
  • Move the controller closer to your Wi-Fi router to improve signal strength.
  • 重新啟動您的Wi-Fi路由器和控制器。
• Music Mode Not Responding:
  • Ensure the built-in microphone is not covered or obstructed.
  • Verify that a music-reactive effect is selected in the WLED app.
  • 提高音樂來源的音量。
• Controller Unresponsive/Frozen:
  • Perform a soft reset by briefly pressing the "KEY (IO0)" button.
  • 斷開電源並重新連接，執行硬重置。
  • If issues persist, consider updating the firmware via the USB Type-C port.

8、維護保養

To ensure the longevity and optimal performance of your BTF-LIGHTING SP803E controller, follow these maintenance guidelines:

• 打掃： Gently wipe the controller with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
• 環境： Keep the controller in a dry, indoor environment, away from direct sunlight, high humidity, and extreme temperatures.
• 固件更新： Periodically check the official WLED documentation or community forums for firmware updates. Updates can introduce new features, improve performance, and fix bugs. Firmware can be updated via the USB Type-C port using a compatible browser and the WLED installer web地點。
• 連接： 定期檢查所有線路連接，確保其牢固且無腐蝕。

Figure 15: UART Download Interface for Firmware Updates

9. 保固和支持

For warranty information and technical support, please refer to the specific terms provided by your retailer or contact BTF-LIGHTING directly through their official web您可以透過網站或客戶服務管道聯絡我們。請保留您的購買收據作為保固索賠的購買憑證。