1. 產品結束view
The Generic Multifunction Weather Station Model Fj3362g is a comprehensive device designed to provide accurate environmental data and timekeeping functions. It features a large touch screen display with backlight for clear visibility of various parameters including time, date, calendar, indoor/outdoor temperature and humidity, atmospheric pressure, moon phases, tides, and city sunrise/sunset times.
This weather station includes a wireless outdoor sensor for remote temperature and humidity monitoring, supporting up to three sensors (one included). It also offers weather forecasting, dual alarms with snooze, and perpetual calendar functionality.
圖1.1： The main unit of the weather station and its accompanying wireless outdoor sensor.
2. 包裝內容
開箱後請檢查包裝內容，確保所有零件齊全：
- 1 x Generic Multifunction Weather Station (Main Unit)
- 1 個無線室外感測器
- 1 x 用戶手冊（本文檔）
- 1 x DC5V/1.2A Power Adapter (for Weather Station)
- Note: 2 x LR6 AA batteries for the weather station and 2 x LR6 AA batteries for the outdoor sensor are required and not included.
3. 設定
3.1 設備供電
- 氣象站： Locate the battery compartment on the back of the main unit. Insert 2 x LR6 AA batteries (not included), ensuring correct polarity. Alternatively, connect the provided DC5V/1.2A power adapter to the DC-in port on the back of the weather station and plug it into a power outlet. Using the power adapter is recommended for continuous backlight and full functionality.
- 無線室外傳感器： Open the battery compartment on the back of the outdoor sensor. Insert 2 x LR6 AA batteries (not included), ensuring correct polarity.
圖3.1： 後部 view of the weather station, illustrating the stand, battery compartment, and DC power input.
3.2 感測器放置和連接
The wireless outdoor sensor transmits data to the main weather station. Optimal placement is crucial for accurate readings and reliable connection.
- Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and heavy rain, to ensure accurate temperature and humidity readings.
- The sensor can be wall-mounted using the integrated hanging hole or placed on a flat surface using its stand.
- The transmission range is up to 60 meters (approximately 197 feet) in an open area. Walls, metal structures, and other electronic devices can reduce this range.
- The weather station supports connection with up to 3 wireless outdoor sensors. Additional sensors are sold separately.
圖3.2： The wireless outdoor sensor, showing its design for wall mounting or table stand use.
圖3.3： Example of the weather station placed indoors and the wireless sensor positioned outdoors for optimal data collection.
圖3.4： The main weather station unit shown in various placement scenarios, including tabletop and wall-mounted.
4. 操作說明
The weather station features a touch screen interface for easy navigation and setting adjustments. The main display provides a comprehensive overview 的所有功能。
圖4.1： Diagram illustrating the touch-sensitive areas (A1-A20, B1-B2) and display segments of the weather station for interaction.
4.1 基本顯示訊息
- 時間和日期： Displays current time (12-hour or 24-hour format), date, and day of the week. The perpetual calendar extends up to the year 2099.
- 星期幾： Available in 7 languages: English, German, Italian, French, Spanish, Dutch, and Danish.
- 室內溫度和濕度： Shows current indoor temperature (-9.9°C to 50°C) and humidity (20% to 95% RH).
- 室外溫度和濕度： Shows current outdoor temperature (-40°C to 70°C) and humidity (20% to 95% RH) from the wireless sensor.
- 氣壓： Displays current atmospheric pressure (600~1100 hPa/mb) and a histogram of the 24-hour historical trend.
- 天氣預報： Provides an icon-based weather forecast.
- 月相與潮汐： 顯示當前月相和潮汐資訊。
- 日出日落： 顯示所選城市的日出日落時間。
- Comfort & Mold Risk: Indicates indoor comfort levels and potential mold risk based on temperature and humidity.
4.2 設定時間和日期
Specific touch points on the screen allow for adjustment. Refer to Figure 4.1 for button locations (e.g., A1-A20, B1-B2 are likely touch zones).
- 按住 模式 button (or equivalent touch area, e.g., A19/A20) to enter time setting mode.
- 使用 UP 和 向下 buttons (or touch areas, e.g., A17/A18) to adjust values.
- 按 模式 again to confirm and move to the next setting (e.g., 12/24-hour format, hour, minute, year, month, day, language for day of week).
- 按下按鈕退出設定模式 模式 until the normal display resumes, or wait for automatic exit.
4.3 警報設置
The weather station supports two daily alarms and an automatic snooze function.
- 按 警報 button (or touch area, e.g., A15/A16) to view 鬧鐘1。再按一次啟動鬧鐘2。
- 按住 警報 按鈕進入鬧鐘設定模式。
- Adjust hour and minute using UP 和 向下 按鈕。
- 按 警報 to confirm and switch between Alarm 1 and Alarm 2 settings.
- 若要啟動/關閉警報，請按 警報 button briefly when view設定鬧鐘時間。鬧鐘圖示將會出現/消失。
- When an alarm sounds, press any button (except snooze) to stop it, or press the 打盹 button (top bar B1 in Figure 4.1) for a temporary delay.
4.4 溫度單位選擇（攝氏/華氏）
短按 °C /°F button (or touch area, e.g., A13/A14) to switch between Celsius and Fahrenheit display for temperature readings.
4.5 Minimum/Maximum Readings and Trends
The weather station records minimum and maximum temperature/humidity values and displays trends.
- 按 MEM button (or touch area, e.g., A11/A12) to view maximum indoor/outdoor temperature and humidity. Press again to view 最小值。
- 按住 MEM to clear recorded minimum/maximum values.
- Trend arrows next to temperature and humidity readings indicate whether the values are rising, falling, or stable.
4.6 Outdoor Temperature Alerts and Frost Warning
You can set upper and lower limits for outdoor temperature alerts.
- 按 警報 button (or touch area, e.g., A9/A10) to activate/deactivate the alert function.
- 按住 警報 to enter alert setting mode.
- 使用 UP 和 向下 to set the desired upper and lower temperature limits.
- A frost warning icon will appear when the outdoor temperature drops to a predefined level (typically near 0°C/32°F).
4.7 背光控制
When powered by batteries, the backlight will illuminate briefly when a button is pressed. When powered by the DC adapter, the backlight can be set to be continuously on or to dim after a period of inactivity. Specific controls for backlight intensity or continuous on/off are usually found in the settings menu (refer to the detailed manual if available, or experiment with the touch areas, e.g., A7/A8 for backlight). The top bar (B1) might also control backlight.
5、維護保養
- 打掃： 用柔軟的布擦拭氣象站和感應器。amp cloth. Do not use abrasive cleaners, solvents, or corrosive chemicals.
- 電池更換： Replace batteries in both the main unit and the outdoor sensor promptly when the low battery indicator appears on the display. Ensure to use fresh LR6 AA batteries and dispose of old batteries responsibly.
- 傳感器保護： Ensure the outdoor sensor remains protected from extreme weather conditions (e.g., heavy rain, direct prolonged sunlight, snow, extreme temperatures) to prolong its lifespan and maintain accuracy.
- 貯存： If storing the device for an extended period, remove all batteries from both units to prevent leakage and potential damage.
6。 故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 氣象站無顯示。 | Batteries are dead or incorrectly inserted; power adapter not connected or faulty. | Check battery polarity and replace if necessary. Ensure power adapter is securely connected and functional. |
| 室外溫度/濕度未顯示或顯示不準確。 | Sensor out of range; low sensor battery; interference; sensor exposed to direct elements. | Move sensor closer to the main unit. Replace sensor batteries. Relocate sensor away from electronic interference. Ensure sensor is in a shaded, dry location. |
| 天氣預報不準確。 | Weather forecasting is based on atmospheric pressure changes and is an estimation, not a guarantee. | Allow 24-48 hours for the station to calibrate to local atmospheric pressure. Understand that forecasts are predictive and not always exact. |
| 警報器沒有響。 | Alarm is not activated; incorrect time set. | Ensure the alarm icon is displayed. Check alarm time settings. |
| 觸控螢幕無反應。 | Temporary software glitch; static electricity. | Remove batteries and power adapter, wait a few minutes, then re-power the device. Ensure hands are clean and dry. |
7. 規格
- 模型： Fj3362g (Manufacturer Part Number: SDJ250506044)
- 材料： ABS
- Indoor Temperature Measurement Range: -9.9°C 至 50°C（14.2°F 至 122°F）
- Outdoor Temperature Measurement Range: -40°C 至 70°C（-40°F 至 158°F）
- Indoor/Outdoor Humidity Measurement Range: 20% 至 95% 相對濕度
- Atmospheric Pressure Measurement Range: 600~1100 hPa/mb
- Wireless Sensor Frequency: 433.92兆赫
- 無線傳輸範圍： 空曠區域最遠可達 60 公尺（197 英尺）
- Max. Outdoor Sensors Supported: 3（含一個）
- 氣象站電源： 2 x LR6 AA batteries or DC5V/1.2A power adapter
- Outdoor Sensor Power Supply: 2 x LR6 AA電池
- Weather Station Dimensions: 167 x 128 x 30 毫米（6.57 x 5.04 x 1.18 英吋）
- 傳感器尺寸： 97 x 50 x 30 毫米（3.82 x 1.97 x 1.18 英吋）
- Weather Station Item Weight: 約260公克（9.17盎司）
- 原產地： 中國
8. 保固和支持
本產品享有標準廠商保固服務。具體保固詳情請參閱購買時提供的文件或聯絡零售商。
If you encounter any issues or have questions regarding the operation or maintenance of your Generic Multifunction Weather Station, please contact customer support. We aim to provide a high-quality reply within 48 hours.
聯絡資訊： Please refer to your purchase receipt or the seller's information on the platform where the product was acquired for specific contact details.