一、簡介
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ANDTE Automatic Condensate Pump, Model ZJ-KBS-4A. This pump is designed to automatically remove condensate water from HVAC/R equipment, air conditioners, and dehumidifiers, ensuring optimal performance and preventing water damage.
2. 安全訊息
安裝和操作前，請仔細閱讀所有安全說明。
- 在進行任何安裝、維護或故障排除之前，請務必先中斷電源。
- 確保將水泵安裝在能夠防止低溫結冰的位置。
- Do not pump flammable liquids or chemicals. This pump is designed for condensate water only.
- 確保所有電氣連接符合當地法規和規定。
- The pump is equipped with a water level alarm and automatic shutdown function to prevent overflow. Do not bypass these safety features.
- 操作過程中，請勿讓手部和異物接觸運轉部件。
3. 產品結束view 和組件
The ANDTE Automatic Condensate Pump is a compact and durable unit designed for reliable condensate removal. It features a high-performance motor and an integrated float switch for automatic operation.
圖 1：主要 view of the ANDTE Automatic Condensate Pump.
Figure 2: Diagram illustrating key specifications and water flow paths (IN/OUT) of the condensate pump.
4. 規格
Below are the technical specifications for the ANDTE Automatic Condensate Pump, Model ZJ-KBS-4A:
| 特徵 | 規格 |
|---|---|
| 型號 | ZJ-KBS-4A |
| 額定容量tag交流電 | 115伏，60赫茲 |
| 額定功率 | 40W (45W also indicated in image) |
| 馬力 | 0.06 馬力（1/16 馬力） |
| Maximum Vertical Head | 20 英尺 |
| 最大流量 | 每小時 80 加侖 (GPH) |
| 罐體容量 | 0.5 Gallon (approx.) |
| 液位開關 | Built-in (Activates at 2.28 inches, shuts off at 1.26 inches) |
| 進水口 | Five 1-inch (0.87-inch universal) water inlets (top/side optional) |
| 出路 | 3/8-inch (4mm) universal water outlet (also 1/4 inch or 0.71 inch inlet outer) |
| 電源線長度 | 3.3 feet (UL certified) |
| 尺寸（長x寬x高） | 9.45 x 5.3 x 5.7 英吋（240 x 135 x 145 毫米） |
| 材料 | 堅固塑膠 |
| 物品重量 | 4.33磅 |
Figure 3: Detailed specifications and physical dimensions of the pump.
5. 安裝與設定
Follow these steps to properly install your condensate pump:
- 放置： Position the pump on a stable, level surface near the condensate drain outlet of your HVAC unit, air conditioner, or dehumidifier. Ensure it is below the drain outlet to allow gravity flow into the pump.
- 進口連接： Connect the condensate drain line from your equipment to one of the 1-inch (0.87-inch universal) inlet ports on the pump. The pump offers multiple inlet options (top/side) for flexible installation. Secure the connection to prevent leaks.
- 插座連接： Connect a 3/8-inch (4mm) discharge tube to the pump's outlet port. Route this tube upwards to the desired drainage location, ensuring it does not exceed the maximum vertical head of 20 feet. Avoid kinks or sharp bends in the tubing.
- 電源連接： Plug the 3.3-foot UL power cord into a standard 115-volt, 60 Hz electrical outlet. Ensure the outlet is properly grounded.
- 測試操作： Once all connections are secure, manually pour a small amount of water into the pump's reservoir to verify that the pump activates, discharges the water, and then shuts off automatically. Check for any leaks.
圖 4：Example installation showing the condensate pump connected to a dehumidifier, with the discharge line routing water upwards.
6. 操作說明
The ANDTE Automatic Condensate Pump operates automatically based on the water level in its reservoir:
- When condensate water from your equipment flows into the pump's reservoir and reaches approximately 2.28 inches, the built-in float switch will activate the pump.
- The pump will then efficiently discharge the water through the connected outlet tube.
- Once the water level drops to approximately 1.26 inches, the float switch will automatically shut off the pump.
- This automatic cycle ensures continuous and reliable condensate removal without manual intervention.
7、維護保養
Regular maintenance is crucial for the longevity and efficient operation of your condensate pump. Perform the following maintenance tasks every 6 months:
- 斷開電源： 在進行任何維護之前，請務必先將水泵從電源插座上拔下。
- Clean Liquid Storage Tank: Carefully remove the pump cover and detach the liquid storage tank. Clean the inside of the tank to remove any sludge, mold, or debris that may have accumulated. Use mild soap and water, then rinse thoroughly.
- Clean Float Ball: Remove the float ball and clean it to ensure it moves freely without obstruction. Any buildup on the float can prevent proper activation or deactivation of the pump.
- 清潔過濾罐： If your model includes a separate filter tank, clean it as well to ensure unrestricted water flow.
- 檢查管道： Check the inlet and outlet tubing for any blockages, kinks, or signs of wear. Clear any obstructions.
- 重新組裝並測試： Reassemble all components, ensuring they are securely in place. Plug the pump back in and perform a test run by pouring water into the reservoir to confirm proper operation.
8。 故障排除
If you encounter issues with your condensate pump, refer to the table below for common problems and solutions:
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 泵不啟動 | No power; Float switch stuck; Motor failure | Check power connection; Clean float switch and reservoir; Contact support if motor fails. |
| 泵連續運行 | Float switch stuck in 'on' position; Leak in discharge line; Backflow | Clean float switch; Check discharge line for leaks or blockages; Ensure proper check valve function. |
| Water overflows from pump | Discharge line blocked or kinked; Pump not operating; Insufficient head height | Clear discharge line; Refer to 'Pump does not turn on' solutions; Ensure discharge height is within 20 feet. |
| 泵有噪音 | 泵浦內有雜物；泵浦未平整；系統內有空氣 | Clean pump reservoir; Ensure pump is on a stable, level surface; Bleed air from discharge line if applicable. |
9. 應用
The ANDTE Automatic Condensate Pump is suitable for a variety of applications requiring efficient condensate removal:
- 除濕機
- Air Conditioners (including embedded and wall-mount portable AC units)
- 商用製冰機
- 鍋爐
Figure 5: Multiple applications for the ANDTE Automatic Condensate Pump, including dehumidifiers, air conditioners, and ice makers.
10. 保固和支持
ANDTE is committed to providing reliable products and customer satisfaction. While specific warranty details for this pump are not explicitly stated, ANDTE generally offers comprehensive support for its products.
- 一般保固資訊： ANDTE products typically come with a 5-year limited coverage, including 1-year full coverage.
- 退貨政策： A 30-day money-back guarantee is often provided.
- 客戶支援： ANDTE aims to provide timely responses to customer inquiries, often within 12 hours.
For specific warranty claims, technical assistance, or any questions regarding your ANDTE Automatic Condensate Pump, please refer to the contact information provided with your purchase or visit the official ANDTE web地點。
