SwanScout 505A Watch Charger Stand User Manual

一、簡介

The SwanScout 505A is a versatile charging stand designed for Apple Watch Series and compatible AirPods models. It features fast charging capabilities, a heat-reducing coil design, and a stable, adjustable stand for optimal user experience. This manual provides essential information for the proper setup, operation, and maintenance of your charging stand.

2. 包裝內容

• 1 x SwanScout 505A Watch Charger Stand
• 1 x USB-C充電線
• 1 本使用手冊

3.產品特點

• Innovative and Elegant Design: A vertical stand with a minimalist aesthetic, suitable for various environments.
• Fast Charging for Apple Watch: Delivers 5W of power, capable of charging Apple Watch Series 10 from 0% to 80% in approximately 60 minutes.
• Separated Coil Design: The charging coil is separated from the main circuit board to effectively reduce heat generation during charging, thereby extending the watch's battery lifespan.
• 穩定充電： Features a unique watch band support design to prevent wobbling and ensure secure positioning of your device.
• Adjustable Charging Angle: The watch band support can rotate from 0° to 45°, allowing for a customizable view充電時的角度。
• Anti-Tipping Weighted Base: The stand's base is weighted to provide exceptional stability and prevent accidental tipping.

4. 設定說明

1. 打開充電器包裝： Carefully remove the SwanScout 505A Watch Charger Stand and its components from the packaging.
2. 連接電源： Insert the provided USB-C charging cable into the USB-C port on the back of the charging stand. Connect the other end of the cable to a compatible USB power adapter (not included). A green indicator light on the base will illuminate when power is connected.
3. 放置： Place the charging stand on a stable, flat surface away from direct sunlight or heat sources.

Note: For optimal fast charging performance, use a power adapter with sufficient wattage (e.g., a PD 20W or 25W adapter).

5. 操作說明

5.1 為 Apple Watch 充電

1. 調整手錶位置： Place your Apple Watch onto the magnetic charging module of the stand. The watch will automatically align and secure itself.
2. 驗證充電： The watch screen will display a charging indicator (a green lightning bolt) to confirm that charging has begun. The indicator light on the stand's base will also be active.
3. 調整角度： Gently rotate the watch band support to adjust the viewing angle between 0° and 45° for comfort.
4. 刪除手錶： Once charging is complete, simply lift your Apple Watch from the stand.

5.2 為 AirPods 充電

The SwanScout 505A is compatible with AirPods 4 and AirPods Pro 2. To charge your AirPods:

1. 放置 AirPods： Place your AirPods charging case (compatible models only) onto the designated charging area on the base of the stand.
2. 驗證充電： The indicator light on your AirPods case will show its charging status.

6、維護保養

• 打掃： Disconnect the power cable before cleaning. Use a soft, dry cloth to wipe the surface of the charging stand. Do not use abrasive cleaners or solvents.
• 貯存： When not in use, store the charger in a cool, dry place away from extreme temperatures.
• 電纜護理： 避免過度彎曲或擠壓充電線，以免損壞。

7。 故障排除

• 設備未充電：
  • 確保 USB-C 連接線牢固地連接到支架和電源轉接器上。
  • Verify the power adapter is functioning and plugged into a live outlet.
  • Check if your device (Apple Watch or AirPods) is correctly positioned on the charging area.
  • Confirm your device is compatible with the SwanScout 505A.
• 慢速充電：
  • Ensure you are using a power adapter that supports fast charging (e.g., PD 20W or 25W).
  • Remove any thick cases from your Apple Watch that might interfere with charging efficiency.
• 過熱：
  • While the SwanScout 505A has a separated coil design to reduce heat, some warmth during charging is normal. If the device or charger becomes excessively hot, discontinue use and contact support.
  • 確保充電器周圍有足夠的通風。
• 指示燈未亮起：
  • Check all cable connections and the power source.
  • 嘗試其他 USB-C 連接線或電源轉接器。

8. 規格

9、相容性

The SwanScout 505A Watch Charger Stand is compatible with the following devices:

• 蘋果手錶： Ultra 3, Ultra 2, Ultra, SE 3, SE 2, SE, Series 11, 10, 9, 8, 7, 6, 5, 4, 3, 2.
• AirPods： AirPods 4 (with Active Noise Cancellation), AirPods Pro 2.

Note: Not compatible with Apple Watch Series 1 or other AirPods models.

10. 安全訊息

• 請勿將設備暴露於水、潮濕環境或極端溫度下。
• 避免設備跌落或受到強烈撞擊。
• 請勿嘗試拆下、修理或改裝充電器。
• 請將其放在兒童和寵物接觸不到的地方。
• 使用過程中確保適當通風，防止過熱。
• This product includes multiple protection features: Overvoltage Protection, Overcurrent Protection, Overtemperature Protection, Overcharge Protection, ESD Protection, Short Circuit Protection, and Foreign Object Protection.

11. 可視化指南

產品圖片

產品影片

12. 保固和支持

This SwanScout product comes with a standard manufacturer's warranty. For detailed warranty information, product support, or to report any issues, please refer to the warranty card included in your package or visit the official SwanScout web網站。您也可以透過購買平台直接聯絡賣家尋求協助。