MEUS RACING M-04B 2.4GHz RC Receiver Instruction Manual

介紹

The MEUS RACING M-04B is a 4-channel 2.4GHz RC receiver designed for remote control vehicles such as RC cars, boats, and tanks. It features advanced anti-interference technology and provides stable signal output for responsive control. This manual provides essential information for the proper setup, operation, and maintenance of your M-04B receiver.

Figure 1: MEUS RACING M-04B 4-Channel RC Receiver.

主要特點

• Advanced 2.4GHz Technology: Integrated with pseudo random FHSS algorithm and GFSK technology for excellent anti-interference ability.
• 擴展控制範圍： Offers a control distance up to 984ft (300 meters) on the ground and 2625ft (800 meters) in the air.
• 即時遙測： Provides real-time telemetry of vital information such as battery voltage and RSSI signal, helping to prevent battery over-discharge and damage.
• 高解析度: Features a high resolution ratio of 4096 for stable signal output and fast response across all channels.
• 簡易裝訂： Equipped with a bind button for simple pairing; press for 1 second after powering up the transmitter and receiver.
• 耐用性： Water splash proof design with anti-polarity protection to prevent damage from incorrect polarity insertion.
• 4-Channel Setup: Specifically designed for use with MEUS RC transmitters.
• 頻道功能： CH1, CH2, CH3 are for servos. CH4 is for light control; connect positive and negative poles, signal pin not required. CH5 on the transmitter controls LEDs connected to receiver CH4.

規格

Figure 2: Detailed specifications for the M-04B receiver.

設定和綁定

1. 連接接收器

Connect your servos to channels CH1, CH2, and CH3. For light control, connect your LEDs to CH4. Ensure correct polarity when connecting components. The receiver is designed with anti-polarity protection.

Figure 3: M-04B receiver port layout. CH1, CH2, CH3 for servos. CH4 for light control. 'B' is the bind button.

2. 與發射器綁定

The M-04B receiver is compatible with MEUS RC transmitters (e.g., ME-10B). To bind the receiver to your transmitter:

1. 請確保發射器和接收器都已關機。
2. Power on your MEUS RC transmitter.
3. Power on the M-04B receiver.
4. Immediately press and hold the 'B' (Bind) button on the receiver for approximately 1 second.
5. The receiver's LED indicator will change to confirm successful binding. Refer to your transmitter's manual for specific binding instructions if needed.

圖 4：Example of a compatible MEUS RC Transmitter (ME-10B).

操作接收機

通道功能

• CH1、CH2、CH3： These channels are used for connecting servos for steering, throttle, or other proportional controls.
• CH4 (Light Control): This channel is dedicated to controlling LED lights. Only the positive and negative poles of the LEDs need to be connected to CH4. The signal pin is not used for light control.
• Transmitter Control for Lights: On your MEUS transmitter, you can typically use CH5 to control the LEDs connected to the receiver's CH4. Refer to your transmitter's manual for specific light control settings.

Light Control Demonstration (using a compatible MEUS Transmitter)

The following video demonstrates how to use light control features with a MEUS transmitter and a compatible receiver. While the video references an ME-01A 8CH receiver, the principles for light control operation with a MEUS transmitter are generally applicable to the M-04B receiver's CH4 light function.

維護

To ensure the longevity and optimal performance of your MEUS RACING M-04B receiver, follow these maintenance guidelines:

• 打掃： Keep the receiver clean and free from dust, dirt, and debris. Use a soft, dry cloth to wipe the exterior. Avoid using solvents or harsh chemicals.
• 防潮保護： While the receiver is water splash proof, it is not fully waterproof. Avoid submerging it in water or exposing it to heavy rain. If it gets wet, power it off immediately and allow it to dry completely before reuse.
• 連接完整性： Regularly check all connections to ensure they are secure and free from corrosion. Loose connections can lead to signal loss or intermittent operation.
• 貯存： 不使用時，請將接收器存放在陰涼乾燥處，避免陽光直射和極端溫度。
• 反極性保護： The receiver includes anti-polarity protection, which helps prevent damage if power connections are accidentally reversed. However, always double-check polarity before connecting power.

故障排除

If you encounter issues with your M-04B receiver, consider the following troubleshooting steps:

• 無電源/無指示燈：
  • Check power source (battery) for charge and proper connection.
  • Verify correct polarity of power connection.
  • Inspect power wires for damage.
• 無訊號/失控：
  • Ensure the receiver is correctly bound to the transmitter. Re-attempt the binding process if necessary.
  • Check the distance between the transmitter and receiver; ensure it's within the specified operating range.
  • Verify that the transmitter's battery is charged.
  • Check for strong interference sources in the operating environment.
  • Inspect antenna placement on the receiver; ensure it's not obstructed or damaged.
• 間歇操作：
  • 檢查所有線路連接是否鬆動或損壞。
  • Ensure no metal parts are shorting out connections.
  • Reduce potential sources of electrical noise near the receiver (e.g., motors, ESCs).
• Lights Not Functioning (CH4):
  • Verify LEDs are correctly connected to CH4 with proper polarity.
  • Check if the light control function is enabled and correctly configured on your MEUS transmitter (usually via CH5).
  • Ensure the LEDs themselves are functional.

If problems persist after following these steps, please contact MEUS RACING customer support for further assistance.

保固和支持

MEUS RACING products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official MEUS RACING web請造訪網站或聯絡您的零售商。請保留您的購買收據作為保固索賠的購買憑證。

如需更多資源和產品信息，請訪問 MEUS RACING Store on Amazon.