1byone All-in-One Record Player User Manual

重要安全說明

在使用本產品前，請仔細閱讀所有說明。請妥善保管本手冊，以便日後參考。

• 請勿將設備暴露在雨中、潮濕環境或極端溫度下。
• 確保設備周圍通風良好。切勿堵塞任何通風口。
• 僅使用製造商指定的附件/配件。
• 在雷雨天氣或長時間不使用時，請拔下設備電源插頭。
• 將所有維修工作交給合格的維修人員。
• 請勿嘗試拆卸或改裝本裝置。

介紹

The 1byone LP03A All-in-One Record Player offers a high-fidelity vinyl listening experience with integrated features for modern connectivity. This belt-drive turntable includes built-in stereo speakers, a magnetic AT-3600L cartridge, and a built-in preamplifier. It also supports wireless audio input via Bluetooth 5.4 and wired connections through an Aux-in port and RCA line output.

Figure 1: The 1byone LP03A All-in-One Record Player.

包裝內容

確認您的包裹含有下列所有物品：

• 1byone LP03A Record Player Unit
• 防塵罩
• Platter with Drive Belt (pre-installed or separate)
• 配重
• 防滑重量
• 電源適配器
• 使用說明書

產品結束view

熟悉唱片機的各個部件和控制按鈕。

正面和頂部 View

圖 2：正面和頂部 View of the Record Player.

1. 拼盤： 支援黑膠唱片播放。
2. 唱臂： 固定墨盒和手寫筆。
3. Cartridge (AT-3600L): 讀唱片的紋路。
4. 配重： 平衡唱臂並調整循跡力。
5. Anti-skate Weight: Prevents the tonearm from drifting inward.
6. 速度選擇器： Switches between 33 1/3 and 45 RPM.
7. 音量/模式旋鈕： Controls volume and selects input mode (Phono, Bluetooth, Aux).
8. 內置揚聲器： 整合音訊輸出。
9. 防塵套： 保護唱盤和唱臂免受灰塵侵害。

後面板連接

圖 3：後面板連接。

1. 唱機/線路輸出切換開關： Selects between Phono (unpreamplified) and Line (preamplified) output for RCA jacks.
2. RCA Jacks (R-RCA-L): 用於連接到外部 amp揚聲器或有源揚聲器。
3. 輔助輸入插孔： 用於透過 3.5mm 線纜連接外部音訊設備。
4. 接地端： For connecting a ground wire to an external amp擴大機可降低嗡嗡聲。
5. 音高調整： 微調播放速度。
6. 直流輸入 12V： 隨附適配器的電源輸入。

Volume/Mode Knob

Figure 4: Volume and Mode Knobs.

設定

請按照以下步驟設定您的唱片機。

1. 轉盤和皮帶的安裝

Figure 5: Platter Spindle and Motor Pulley.

• 小心地將盤子放在中心軸上。
• Locate the drive belt (usually pre-installed under the platter or in the packaging).
• If not pre-installed, gently stretch the drive belt around the motor pulley and the inner rim of the platter. Ensure the belt is flat and not twisted.

2. 唱頭和唱針

The 1byone LP03A comes with a pre-installed Audio-Technica AT-3600L magnetic cartridge. Ensure the stylus guard is removed before playback.

Figure 6: Audio-Technica AT-3600L Cartridge.

3. Tonearm Balance and Tracking Force Adjustment

Properly balancing the tonearm and setting the tracking force is crucial for optimal sound quality and to prevent damage to your records and stylus.

Figure 7: Adjustable Counterweight.

1. Zero Balance the Tonearm:
   • Place the record player on a level surface.
   • 取下手寫筆保護器。
   • 放下唱臂升降桿。
   • 輕輕鬆開唱臂夾amp.
   • Rotate the counterweight at the rear of the tonearm until the tonearm is perfectly balanced horizontally, floating freely.
2. 設定追蹤力：
   • Once balanced, hold the counterweight steady with one hand and rotate only the numbered ring on the front of the counterweight until '0' aligns with the center line on the tonearm.
   • Rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. For the AT-3600L cartridge, the recommended tracking force is typically 3.5 grams.

4. Anti-skate Adjustment

The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. Attach the anti-skate weight's loop to the second groove of the anti-skate post for the recommended setting.

5. 防塵罩安裝

Insert the hinges of the dust cover into the corresponding slots on the rear of the record player.

6. 電源連接

Connect the power adapter to the DC IN 12V port on the rear panel of the record player, then plug it into a wall outlet.

手術

播放黑膠唱片

1. 在盤子上放一張唱片。
2. 使用速度選擇開關選擇適當的速度（33 1/3 或 45 RPM）。
3. Ensure the stylus guard is removed.
4. 使用唱臂提升桿抬起唱臂。
5. Manually position the tonearm over the desired track of the record.
6. 輕輕放下唱臂，使用升降桿。唱針將接觸唱片，播放隨即開始。
7. Adjust the volume using the Volume/Mode knob.
8. To stop playback, lift the tonearm, return it to the tonearm rest, and secure it with the clamp.

藍牙輸入

這款唱片機可以透過藍牙無線接收來自裝置的音訊訊號。

Figure 8: Wireless Bluetooth Input.

1. 打開唱片機。
2. Rotate the Volume/Mode knob to select Bluetooth mode (indicated by a blue LED).
3. Enable Bluetooth on your smartphone, tablet, or computer and search for "1byone LP03A".
4. Select the device to pair. Once connected, you can stream audio to the record player's built-in speakers.

輔助輸入連接

Connect external audio sources using a 3.5mm audio cable to the AUX IN jack on the rear panel.

1. Connect one end of a 3.5mm audio cable to your external device (e.g., MP3 player).
2. Connect the other end to the AUX IN jack on the record player.
3. Rotate the Volume/Mode knob to select Aux-in mode.
4. Adjust volume from both the record player and the external device.

RCA 線路輸出連接

Use the RCA Line Out to connect the record player to an external amp揚聲器或有源揚聲器。

1. Determine if your external amplifier has a dedicated PHONO input.
2. 如果你的 amplifier has a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to 菲諾. Connect the RCA cables from the record player to the PHONO input of your amplifier. Connect a ground wire from the record player's ground terminal to your amp如有，請接起擴大機的接地端子。
3. 如果你的 amp利弗確實 不是 have a PHONO input, set the Phono/Line-Out switch on the record player's rear panel to 線. Connect the RCA cables from the record player to any standard LINE input (e.g., AUX, CD, TAPE) on your amp擴音器。
4. Adjust the volume on your external amplifier. The record player's internal volume control will not affect the RCA output.

音高調整

The Pitch Adjust knob on the rear panel allows for fine-tuning the playback speed. Rotate it slightly to increase or decrease the speed as needed.

維護

Regular maintenance ensures the longevity and optimal performance of your record player.

清潔觸控筆

• 清潔觸控筆時，請務必使用專為清潔觸控筆而設計的軟毛刷，從後向前清潔。
• Do not use excessive force or clean from side to side, as this can damage the stylus.
• Replace the stylus when signs of wear are visible (e.g., distorted sound, skipping).

清潔轉盤

• 用柔軟的乾布擦拭設備。
• Do not use harsh chemicals, cleaning solvents, or abrasive cleaners.
• Keep the platter and tonearm free of dust and debris.

防塵罩保養

Clean the dust cover with a soft, lint-free cloth. Avoid using abrasive materials that could scratch the surface.

故障排除

請參閱本節以了解常見問題及其解決方案。

規格

Technical specifications for the 1byone LP03A Record Player.

• 模型： LP03A
• 驅動器類型： 皮帶傳動
• 速度： 33 1/3, 45 轉
• 墨水匣: Audio-Technica AT-3600L (Magnetic)
• 內置預amp強化劑： 是的
• 演講嘉賓： 內置立體聲揚聲器
• 無線連接： 藍牙5.4
• 輸入： 輔助輸入 (3.5mm)
• 輸出： RCA Line Out (Switchable Phono/Line)
• 電源供應： 直流12V
• 尺寸（大約）： 17.32 x 14.09 x 7.4 英寸（長 x 寬 x 高）
• 重量（約）： 17.16磅

圖 9：產品尺寸。

保固和支持

Your 1byone LP03A Record Player is covered by a comprehensive warranty and return policy.

• 保固單： 36個月
• 退貨政策： 90 天
• 客戶支援： 如需協助，請聯絡我們 ushelp@1byonebros.com.