1. 產品結束view
The Audio Array AM-W20 is a magnetic wireless lapel microphone set designed for high-fidelity audio recording. It features one-touch smart noise reduction, 48KHz/24Bit Hi-fi recording capabilities, a 50-meter wireless range, and an 800mAh battery providing up to 48 hours of operation with the charging case. This microphone is suitable for various applications including vlogging, podcasting, and streaming.
Image: The Audio Array AM-W20 Magnetic Wireless Lapel Microphone Set, including the transmitter, receiver, and charging case.
主要特點：
- 高傳真錄音： 48kHz/24bit audio capture with a 70dB signal-to-noise ratio.
- 智慧降噪： One-touch activation for clear voice recordings in noisy environments.
- 擴展無線範圍： Up to 50 meters (164 feet) of uninterrupted working range.
- 電池壽命長： 單次充電可使用長達 4 小時，配合充電盒使用可達 48 小時。
- 通用兼容性： Supports iOS (with Type-C to Lightning adapter) and Android devices (Type-C/USB-C ports) with OTG support.
- Magnetic Clip Design: Allows for versatile and secure positioning.
Image: Visual representation of the AM-W20's key features, including compatibility, magnetic clip, wireless technology, audio quality, range, battery life, and noise cancellation.
2. 設定說明
2.1 初始配對和連接
The Audio Array AM-W20 system is pre-paired at the factory for immediate use. No manual pairing is required for initial setup.
- 為設備充電： Ensure both the transmitter (TX) and receiver (RX) are fully charged using the provided charging case.
- 連接接收器： Plug the receiver (RX) into the Type-C or USB-C port of your recording device (smartphone, tablet, etc.). For iOS devices, use the included Type-C to Lightning adapter.
- 開啟發射器電源： Take the transmitter (TX) out of the charging case. It will automatically power on and connect to the receiver.
- 驗證連接： A solid indicator light on both the transmitter and receiver typically signifies a successful connection.
Image: Visual guide demonstrating the three-step plug-and-play connection process: 1. Plug in the receiver, 2. Turn on the transmitter, 3. Devices are connected.
2.2 Device Compatibility and OTG Function
The AM-W20 is compatible with a wide range of devices, including iPhones, iPads, and Android smartphones/tablets with Type-C or USB-C ports. OTG (On-The-Go) support is essential for Android devices.
- iOS 裝置： Use the provided Type-C to Lightning adapter.
- 安卓設備： Ensure your device supports OTG. Some Android smartphones require you to manually enable the OTG function in their settings for external microphones to work correctly.
Image: Illustration of the AM-W20's broad compatibility with various mobile devices and applications.
Image: Guide for Android users on enabling OTG and configuring the 'Open Camera' app for external microphone use.
3. 操作說明
3.1 電源開關
The transmitter (TX) automatically powers on when removed from the charging case. To manually power on or off, press and hold the power button on the transmitter.
3.2 Noise Cancellation (ANC Mode)
The AM-W20 features a smart noise reduction function to minimize background interference.
- 啟用設定: Press the yellow button on the transmitter once to activate noise cancellation. A green indicator light will illuminate on the transmitter.
- 停用： Press the yellow button again to deactivate noise cancellation.
- 自動激活： Noise cancellation is active automatically when the transmitter is turned on.
Image: The AM-W20 transmitter highlighting the yellow button for one-tap noise cancellation.
3.3 靜音功能
To temporarily mute the microphone during recording:
- 啟用/停用： Double-tap the power button on the transmitter.
Image: Explanation of Audio Modes, showing single tap for ANC and double tap for Mute.
3.4 麥克風位置
The AM-W20 features a magnetic clip for flexible and secure attachment.
- 磁性附件： Use the magnetic clip to attach the microphone to clothing or other surfaces.
- 最佳放置： For best audio quality, position the microphone approximately 6-8 inches (15-20 cm) below your mouth, centered on your chest. Avoid placing it directly under your chin or too close to your mouth to prevent plosives and distortion.
Image: Demonstrates various ways to wear the microphone, including magnetic attachment, necklace style, and traditional clip.
4、維護保養
4.1 Charging the Microphone Set
The AM-W20 microphone set is powered by an internal rechargeable battery. The charging case provides extended battery life.
- 發射器電池壽命： 一次充電可使用長達 4 小時。
- 附保護殼的總電池續航力： 長達48小時。
- 收費： Place the transmitter and receiver into the charging case. Connect the charging case to a power source using a standard USB-C cable. The indicator lights on the case will show the charging status.
Image: Visual display of the AM-W20's battery performance, indicating 4 hours of use per charge and 48 hours with the charging case.
4.2 清潔和儲存
- 打掃： Use a soft, dry cloth to clean the microphone and charging case. Avoid using liquids or abrasive cleaners.
- 貯存： Store the microphone set in its charging case in a cool, dry place away from direct sunlight and extreme temperatures.
5。 故障排除
If you encounter issues with your Audio Array AM-W20, refer to the following common troubleshooting steps:
- Microphone Disconnects:
- Ensure the receiver is securely plugged into your device.
- Check the battery level of both the transmitter and receiver.
- Verify that there are no significant obstacles or sources of interference within the 50-meter range.
- For Android devices, confirm that the OTG function is enabled in your phone's settings.
- Poor Audio Quality / Disturbance / Shrieking Sound:
- 降噪： Ensure noise cancellation is activated (green light on TX). If recording in extremely noisy environments, some residual noise may still be present.
- 麥克風放置： Avoid placing the microphone too close to your mouth or directly under your chin. Optimal placement is typically 6-8 inches below the mouth.
- 錄音音量： If experiencing a shrieking sound, the input volume might be too high. Adjust the recording volume settings on your device if possible.
- 干涉： 遠離其他無線設備或可能造成乾擾的強電磁場。
- 充電問題：
- Ensure the USB-C charging cable is fully inserted into both the charging case and the power adapter.
- 嘗試使用不同的 USB-C 連接線和電源轉接器，以排除配件故障的可能性。
- Check for any debris in the charging ports of the case or devices.
- No Sound Recording (Android):
- Enable OTG in your phone's settings.
- Use a third-party camera app like 'Open Camera' and ensure 'External mic' is selected as the audio source in its settings.
6. 規格
| 特徵 | 規格 |
|---|---|
| 型號 | AM-W20 |
| 特別報道 | 無線的 |
| 相容設備 | Smartphone, Tablet (iOS, Android) |
| 顏色 | 黑色的 |
| 包含的組件 | Microphone (Transmitter), Receiver, Charging Case |
| 極性模式 | 單向 |
| 物品重量 | 170 克（0.17 公斤） |
| 阻抗 | 600歐姆 |
| 麥克風外形尺寸 | 領夾式 |
| 商品尺寸（長x寬x高） | 13.5 x 10.5 x 5 厘米 |
| 電源 | 電池供電 |
| 頻道數 | 1 |
| 連接技術 | USB |
| 連接器類型 | USB Type-C |
| Samp利率 | 48kHz |
| 比特深度 | 24位 |
| 信噪比 | 70分貝 |
| 最大聲壓級 (SPL) | 115 dB聲壓級 |
| 無線範圍 | 無障礙物時可達50公尺（164英尺） |
| 發射器電池壽命 | 4 小時（單次充電） |
| 電池總壽命 | 48 小時（含充電盒） |
7. 保固和支持
For product support, technical assistance, or warranty inquiries, please contact Audio Array customer service using the information below:
- 電話： +91 9372146440
- 電子郵件： 支援@audioarray.in
Image: Audio Array customer support details, including phone number and email for assistance.
請保留您的購買憑證，以便提出任何保固索賠。