BAKON BK602S 2-in-1 Soldering Iron Hot Air Rework Station Instruction Manual

一、簡介

The BAKON BK602S is a versatile 2-in-1 soldering and hot air rework station designed for electronic DIY, circuit work, and various repair tasks. This compact unit integrates both a welding station and a hot air rework station, offering precise temperature control, rapid heating, and intelligent features like auto-sleep to extend tool lifespan. It is an essential tool for professionals and hobbyists alike, providing comprehensive functionality for soldering, desoldering, and component rework.

圖 1.1：結束view of the BAKON BK602S 2-in-1 Soldering Iron Hot Air Rework Station.

Figure 1.2: The BK602S features a combined soldering iron and hot air rework station.

2. 包裝內容

Upon unboxing your BAKON BK602S, please ensure all the following items are present:

• 1 x BAKON BK602S Main Unit (Soldering & Hot Air Rework Station)
• 1 x 電烙鐵
• 1 x 熱風槍
• 1 個吸錫器
• 1 x Anti-static Tweezers
• 1 x 30G Solder Wire
• 1 x Flux
• 5 個烙鐵頭（各種類型）
• 2 個熱風噴嘴（各種尺寸）
• 1 x Brass Cleaner
• 1 x Solder Sucking Tape (Desoldering Wick)
• 1 條電源線

Figure 2.1: A selection of the included accessories for the BK602S.

3. 設定

Follow these steps to set up your BAKON BK602S rework station:

1. 拆開組件包裝： 小心地從包裝中取出所有物品。
2. Assemble Hot Air Gun Holder: Attach the hot air gun holder to the main unit using the provided screws. This is typically the only assembly required.
3. 連接工具： Plug the soldering iron and hot air gun cables into their respective ports on the main unit.
4. 準備清潔區域： Place the brass cleaner in its designated slot and the cleaning sponge in the sponge tray. You may dampen the sponge slightly for effective tip cleaning.
5. 安裝焊​​錫絲： If desired, mount the included solder wire onto the integrated wire holder for convenient dispensing during soldering.
6. 電源連接： Connect the power cable to the main unit and then to a suitable AC 110V 50Hz power outlet.
7. 開機： Locate the power switch on the back of the unit and flip it to the 'ON' position. The LCD display will illuminate, indicating the unit is ready for operation.

Figure 3.1: The compact design integrates various holders and cleaning tools for convenience.

圖 3.2：詳細 view of the BK602S components and controls.

4. 操作說明

The BAKON BK602S features independent controls for the soldering iron and hot air gun, allowing for simultaneous or separate operation.

Figure 4.1: The dual functionality and intelligent features of the BK602S.

Figure 4.2: The large LCD screen provides clear visual feedback for operation.

4.1 電烙鐵操作

The 90W soldering iron features rapid heating and precise temperature control via a built-in PID program. It supports a temperature range of 356-896 °F (180-480 °C).

• 電源開/關： Use the dedicated power button for the soldering iron on the control panel.
• 溫度調節： Use the up/down arrow buttons to set the desired temperature. The LCD will display the current and set temperatures.
• 自動睡眠功能： The soldering iron automatically enters sleep mode (reducing temperature to 356°F) when placed in its holder for a user-defined period (60-600 seconds). This extends the lifespan of the soldering iron tip. It will automatically heat up when picked up.
• 尖端更換： Ensure the iron is cool before replacing tips. Unscrew the retaining collar, remove the old tip, insert the new tip, and secure the collar.

Figure 4.3: The soldering station offers a wide temperature range and an auto-sleep feature.

Figure 4.4: The soldering iron heats rapidly and maintains stable temperatures.

4.2. 熱風返修台操作

The 550W hot air gun provides quick heating and stable temperatures (212°F-932°F or 100-500°C) with adjustable airflow for various rework tasks.

• 電源開/關： Use the dedicated power button for the hot air gun on the control panel.
• 溫度調節： Use the up/down arrow buttons to set the desired temperature.
• 氣流調節： The air volume can be adjusted across 17 levels to suit different applications.
• 自動睡眠功能： Similar to the soldering iron, the hot air gun enters sleep mode (cooling down) when placed in its holder for a set duration (1-60 seconds), preserving the heating element.
• 噴嘴更換： Ensure the hot air gun is cool before changing nozzles.

Figure 4.5: The hot air station offers precise temperature and airflow control with auto-sleep.

Figure 4.6: The hot air gun provides strong, adjustable airflow for various tasks.

4.3. 一般使用技巧

• 快捷按鈕： Use the 'CH' (Channel) buttons to quickly switch between preset temperature and airflow settings for both the soldering iron and hot air gun.
• USB充電： The unit includes a 5V USB charging port for convenient charging of small electronic devices.
• 應用： The BK602S is suitable for a wide range of applications including craft soldering, circuit board dismantling, electronic circuit soldering, cell phone and computer repair, and general daily circuit repair.

Figure 4.7: The BK602S is a versatile tool for various electronic repair and DIY projects.

Figure 4.8: Diverse applications of the soldering and rework station.

4.4. 教學視頻

5、維護保養

Proper maintenance ensures the longevity and optimal performance of your BAKON BK602S.

• 焊嘴清潔： Regularly clean the soldering iron tip using the brass cleaner or a damp 海綿。它可以去除氧化物和舊焊料，確保高效的熱傳遞。
• 單元清潔： Keep the main unit and tools free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using abrasive cleaners or solvents.
• 貯存： When not in use, ensure both the soldering iron and hot air gun are placed in their respective holders. Store the unit in a clean, dry environment.

6。 故障排除

以下是一些常見問題及其潛在解決方案：

• "H-E" Error on Display: This error typically indicates a heating element failure or a loose connection.
• 解決方案： Power off the unit and unplug it. Carefully inspect all cable connections for the soldering iron and hot air gun to ensure they are securely plugged in. If the issue persists, contact customer support.
• 焊點不良： If solder is not flowing correctly or joints appear dull/cold.
• 解決方案： Ensure the soldering iron tip is clean and properly tinned. Verify the temperature setting is appropriate for the solder and components being used. Apply a small amount of flux to the joint area.
• Hot Air Gun Not Heating/Blowing:
• 解決方案： Check the power connection for the hot air gun. Ensure the temperature and airflow settings are not at their minimum. Verify the hot air gun is not in auto-sleep mode (lift it from the holder to reactivate).

7. 規格

8.保修與支持

For information regarding product warranty, technical support, or service, please refer to the official BAKON web或直接聯絡其客戶服務部門。本手冊未提供具體的保固詳情。