DTAPE雷射測距儀使用手冊

介紹

This manual provides detailed instructions for the safe and efficient operation of your DTAPE Laser Measure. This device is designed for precise distance measurements, offering multiple modes for various applications.

包含什麼

• ACPOTEL 165 Ft Laser Measuring Device
• 1.5V AAA Batteries
• 手提包
• 用戶手冊（本文檔）
• 手帶
• 包裝盒

設定

電池安裝

The DTAPE Laser Measure requires 1.5V AAA batteries. Locate the battery compartment on the back of the device, open it, and insert the batteries according to the polarity indicators. Close the compartment securely.

Figure 1: DTAPE Laser Measure and included accessories.

電源開/關

Press and hold the power button (usually marked with a power symbol) to turn the device on or off. The backlit LCD display will illuminate upon activation.

操作說明

基本距離測量

1. Point the laser aperture towards the target surface.
2. Press the measurement button (often the main central button) once to activate the laser.
3. Press the measurement button again to take a reading. The distance will be displayed on the screen.

Figure 2: The ultra-HD LCD display showing measurement results.

單位換算

To switch between measurement units (m/in/ft/ft+in), long-press the "Unit" button. The current unit will be indicated on the display.

Figure 3: Instant unit conversion between meters, feet, inches, and feet+inches.

測量參考點

The device allows you to set the measurement reference point from either the front or the back of the device. Press the reference point button (often indicated by an icon showing the device's base) to toggle between these options.

Figure 4: Switching between front and back measurement reference points.

多種測量模式

The DTAPE Laser Measure offers 7 measurement modes. Press the mode button (often indicated by a grid or multiple squares icon) to cycle through the available functions:

• 距離： Single point-to-point measurement.
• 區域： 計算表面的面積（長×寬）。
• 體積： 計算空間的體積（長 x 寬 x 高）。
• 畢達哥拉斯： Indirect measurement using the Pythagorean theorem (single or double).
• 連續測量： Real-time tracking of distance as the device is moved.
• 加法/減法： 增加或減少測量值。
• 資料儲存： Stores historical measurement data.

Figure 5: Visual representation of various measurement modes including distance, area, volume, and Pythagorean.

Official Product Video: DT50 Laser Distance Meter

維護

The DTAPE Laser Measure is designed with an IP54 rating, providing protection against dust and splashing water.

• 用柔軟的干布擦拭以保持設備清潔。
• 避免將設備長時間暴露在極端溫度或陽光直射下。
• Store the device in its portable bag when not in use to protect it from dust and impacts.
• 如果長時間不使用設備，請取出電池以防止漏液。

故障排除

If you encounter issues with your DTAPE Laser Measure, consider the following:

• 設備未開機： 檢查電池安裝狀況，確保電池電量充足。如有必要，請更換電池。
• 讀數不準確： Ensure the laser aperture is clean and unobstructed. Verify the correct reference point is selected. Measure on a stable, non-reflective surface.
• 雷射不可見： In very bright conditions, the laser dot may be difficult to see. Try to shade the target area or use the device in lower light.

如果問題仍然存在，請參閱包裝內附帶的詳細使用手冊或聯絡客戶支援。

規格

保固和支持

Your DTAPE Laser Measure comes with a 24-Month Warranty, ensuring peace of mind regarding product quality and performance.

For technical support, warranty claims, or any inquiries, please contact ACPOTEL customer service. Refer to the contact information provided in your product packaging or on the official ACPOTEL web地點。