一、簡介
This manual provides essential instructions for the proper use and maintenance of your HIFI WALKER T10 Air Magnetic Charging Cable. Please read this guide thoroughly before using the product to ensure optimal performance and longevity.
2. 產品結束view
2.1 包裝內容
- 2 x HIFI WALKER T10 Air Magnetic Charging Cables
2.2 主要特點
- 磁性附件： Ensures a secure and reliable connection for charging.
- 4-Pin Interface: Specifically designed for compatibility with HIFI WALKER T10 Air Bone Conduction Headphones.
- USB 連接： Standard USB-A connector for broad compatibility with power sources.
- Durable TPE Cable: Constructed with Thermoplastic Elastomer (TPE) for flexibility and durability.
- 最佳長度： Approximately 2 feet (62.5 cm) for convenient use.
Image 1: Magnetic attachment mechanism for the charging cable. The diagram illustrates how the magnetic pins align with the headphone's charging port.
圖 2：詳細信息 view of the 4-pin magnetic connector, highlighting its design and contact points.
3. 設定
To set up your HIFI WALKER T10 Air Magnetic Charging Cable, follow these steps:
- 識別組件： Locate the USB-A end of the charging cable and the magnetic 4-pin connector end.
- 連接到電源： Insert the USB-A end of the cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source is functional.
- 連接耳機： Align the magnetic 4-pin connector with the charging port on your HIFI WALKER T10 Air Bone Conduction Headphones. The magnetic connection will automatically snap into place. Ensure the pins are correctly aligned for a secure connection.
Image 3: The HIFI WALKER T10 Air headphones are shown connected to a laptop via the magnetic charging cable, illustrating a typical charging setup.
4. 操作說明
Once the cable is securely connected to both a power source and your HIFI WALKER T10 Air headphones, charging will commence automatically. The charging status is typically indicated by an LED light on your headphones (refer to your headphone's manual for specific LED indicators).
- 充電時間： Charging duration varies based on the headphone's battery level and the power output of the USB source.
- 資料傳輸： This cable is primarily designed for charging. While some data transfer may be possible, its primary function is power delivery.
5、維護保養
Proper care of your charging cable will extend its lifespan:
- 打掃： Gently wipe the cable and magnetic connectors with a dry, soft cloth to remove dust or debris. Avoid using liquid cleaners directly on the connectors.
- 貯存： 請將電纜存放在陰涼乾燥處，避免陽光直射和極端溫度。請勿將電纜纏繞過緊，以免損壞內部導線。
- 處理： Always grasp the connector ends when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage the internal wiring.
6。 故障排除
If you encounter issues with your charging cable, consider the following:
- 耳機無法充電：
- Ensure the USB-A end is fully inserted into a working power source.
- Verify the magnetic 4-pin connector is securely attached and correctly aligned with the headphone's charging port.
- 嘗試使用不同的USB電源或連接埠。
- Inspect the cable for any visible damage (frays, bends, or broken connectors). If damaged, discontinue use.
- 連接鬆脫：
- Ensure there is no debris on the magnetic contacts of either the cable or the headphones.
- Confirm the cable is designed for your specific HIFI WALKER T10 Air headphones.
7. 規格
| 特徵 | 細節 |
|---|---|
| 品牌 | HIFI學步車 |
| 型號名稱 | T10航空 |
| 連接器類型 | 4-Pin Magnetic, USB-A |
| 電纜類型 | USB |
| 相容設備 | HIFI WALKER T10 Air Bone Conduction Headphones |
| 特別報道 | 磁性附件 |
| 電纜材質 | 熱塑性彈性體 |
| 電纜長度 | Approx. 2 feet (62.5 cm) |
| 顏色 | 黑色的 |
| 商品數量 | 2 (Two-Pack) |
Image 4: The charging cable is displayed with its length clearly marked as 2 feet (62.5 cm).
8. 保固和支持
For warranty information and customer support, please refer to the documentation included with your original purchase or contact HIFI WALKER customer service directly through their official web購買該產品的網站或零售商。
請保留您的購買憑證以供保固索賠。