Avatar Controls C37 Wi-Fi Smart LED Light Bulb User Manual

一、簡介

Thank you for choosing the Avatar Controls C37 Wi-Fi Smart LED Light Bulb. This smart bulb offers a wide range of features including dimmable brightness, 16 million color options, music synchronization, and compatibility with voice assistants like Amazon Alexa and Google Assistant. This manual will guide you through the installation, setup, and operation of your new smart light bulbs.

2. 安全訊息

• 安裝或拆卸燈泡前，請務必關閉電源。
• Do not use with standard dimmers. This bulb is dimmable via the app or voice control only.
• 僅適合室內使用。
• 請勿拆卸燈泡。
• 避免接觸水或高濕度。
• 在規定的量內操作tag電壓範圍為 100-120 伏，頻率為 60 赫茲。

3. 包裝內容

• 4 x Avatar Controls E12 Smart Bulbs
• 1 本使用手冊

Image: Contents of the Avatar Controls smart bulb package.

4. 產品規格

5. 設定說明

5.1 物理安裝

1. 關機： Before installation, ensure the power to the light fixture is turned off at the switch or circuit breaker.
2. 安裝燈泡： Carefully screw the Avatar Controls E12 smart bulb into a standard E12 candelabra base socket.
3. 開機： Turn the power back on to the light fixture. The bulb should blink, indicating it is in pairing mode. If it does not blink, turn it off and on three times to reset it.

Image: Smart bulb installed in a chandelier.

5.2 應用程式下載和配對

1. 下載應用程序： Download the "AvatarControls" or "Smart Life" app from the App Store (iOS) or Google Play Store (Android).
2. 註冊/登入： 開啟應用程序，註冊新帳號或使用現有帳號登入。
3. 新增設備： Tap the "+" icon in the top right corner of the app to add a new device. Select "Lighting" > "Light Source (Wi-Fi)" or similar.
4. 連接到 Wi-Fi： 請確保您的手機已連接至 2.4GHz Wi-Fi 網路。在應用程式中輸入您的 Wi-Fi 密碼。 Note: The bulbs only support 2.4GHz Wi-Fi.
5. 確認閃爍： Confirm that the bulb is rapidly blinking (or follow the app's instructions for slow blinking if needed).
6. 一對： The app will begin searching for the device. Once found, the bulb will stop blinking and appear in your device list.

Image: App interface for smart bulb control.

6. 操作說明

6.1 應用程式控制

Once paired, you can control your smart bulbs using the AvatarControls or Smart Life app:

• 顏色調整： Select from 16 million colors to match your mood or decor.
• 亮度控制： 調整亮度從 1% 到 100%。
• 色溫： Tune white light from warm (2700K) to cool (6500K).
• 場景模式： Choose from pre-set scenes or create custom ones for various activities (e.g., Reading, Party, Night).

Image: Smart bulb displaying 16 million colors.

Image: Adjustable color temperature from warm to cool white.

Image: 1%-100% brightness dimmable feature.

6.2 語音控制

The bulbs are compatible with Amazon Alexa and Google Assistant. Link your AvatarControls/Smart Life account to your voice assistant app to enable voice commands.

• Examp命令：
• “Alexa，打開客廳的燈。”
• “嘿，谷歌，把臥室的燈光調成藍色。”
• “Alexa，把廚房燈光調暗到50%。”

Image: Hands-free voice control with Alexa.

6.3 音樂同步

The music sync feature allows the light bulbs to change colors and brightness in rhythm with music played through your phone's microphone.

Image: Lights synchronizing with music.

6.4 日程安排和計時器

Set schedules for your lights to turn on/off at specific times, or create timers for automated lighting routines.

• Wake Up/Sleep: Program lights to gradually brighten in the morning or dim at night.
• 客場模式： Schedule lights to turn on/off randomly to simulate occupancy when you are away.

Image: Convenient timer for sleep and wake-up routines.

6.5 群組控制和設備共享

• 群控： Group multiple smart bulbs together in the app to control them simultaneously with a single command.
• 設備共享： Share control of your smart bulbs with family members through the app.

Image: App control, group control, and device sharing features.

6.6 Power-on Behavior

The smart bulbs remember their last setting and brightness levels when switched off and back on, ensuring they return to your preferred state.

7、維護保養

• 打掃： 清潔前，請確保燈泡已關閉並冷卻。用柔軟的乾布擦拭。請勿使用液體清潔劑。
• 貯存： 不使用時，請將燈泡存放在陰涼乾燥處。

8。 故障排除

• Bulb not connecting/blinking: Ensure your Wi-Fi is 2.4GHz. Try turning the bulb off and on three times to reset it to pairing mode. Move closer to your Wi-Fi router during setup.
• 語音控制功能無法使用： Verify that your AvatarControls/Smart Life account is correctly linked to your Alexa or Google Assistant app. Check your internet connection.
• 應用內燈泡離線： Check your Wi-Fi connection. Ensure the bulb has power. Try restarting your Wi-Fi router.
• Lights not responding to music sync: Ensure your phone's microphone is enabled for the app and is picking up sound.

9. 保固和支持

Avatar Controls provides a 1-year manufacturer's warranty for this product. For technical support, warranty claims, or further assistance, please contact Avatar Controls customer service through their official web網站或應用程式中提供的聯絡資訊。

10. 產品視頻