1. 產品結束view
The CYCLAMI S2 Nylon Out Front Bike Computer Mount is designed to securely hold your cycling computer and compatible accessories, positioning them conveniently in front of your handlebars. This mount is constructed from reinforced nylon for durability and features a low wind drag design.
主要特點：
- Wide Compatibility: Supports XOSS, iGPSPORT, CooSpo, and Garmin Edge series cycling computers (e.g., Edge Touring, Edge 830, Edge 130 Plus, Edge 530).
- Handlebar Fit: Designed for circular bike handlebars with diameters between 1" and 1.25" (25.4mm-31.8mm).
- Out Front Positioning: Places your device forward for improved visibility and reduced distraction.
- Durable Construction: Made from reinforced nylon for strength and longevity.
- Water Resistance: Designed to withstand various weather conditions.
Image 1.1: The CYCLAMI S2 mount showcasing its multifunctionality with a bike computer and a headlight.
Image 1.2: Illustration of the mount's low wind drag design, optimizing aerodynamics.
2. 包裝內容
打開包裝後，請檢查所有零件是否齊全：
- 1 x CYCLAMI S2 Out Front Bike Computer Mount (Nylon)
- 1 x Allen Wrench (for installation)
- Various adapters for different cycling computers (e.g., Garmin, XOSS, iGPSPORT)
- 安裝螺絲和硬件
3. 安裝指南
Follow these steps to correctly install your CYCLAMI S2 Out Front Bike Computer Mount:
- 準備車把： Ensure your bike handlebar is clean and free of obstructions in the desired mounting area. The mount is compatible with circular handlebars of 1" to 1.25" (25.4mm-31.8mm) diameter.
- 安裝支架： Place the mount around your handlebar, ensuring the CYCLAMI logo faces forward and the computer interface is positioned correctly.
- 固定 Clamp: Use the provided Allen wrench to tighten the screws on the mount's clamp. Tighten evenly until the mount is secure and does not rotate freely. Do not overtighten.
- 調整角度（可選）： The mount allows for slight angle adjustment. Loosen the main screw slightly, adjust to your preferred viewing angle, and then re-tighten securely.
- Attach Computer Adapter: Select the appropriate adapter for your cycling computer (Garmin, XOSS, iGPSPORT). Attach it to the top of the mount using the small screws provided. Rotate left to tighten the adapter.
- Attach Bottom Extension (Optional): If you plan to attach a headlight or action camera below the computer, use the bottom extension piece and secure it with the provided screws.
- 安裝您的裝置： Twist your cycling computer onto the adapter until it locks into place. If using a headlight, attach it to the bottom extension.
Image 3.1: Visual guide for installing the CYCLAMI S2 mount, detailing each step from overview to completion.
Video 3.1: This video demonstrates the installation process of the CYCLAMI S2 bike computer mount, including attaching the mount to the handlebar, adjusting its angle, and securing various compatible cycling computers and headlights.
4. 操作說明
Once installed, the CYCLAMI S2 mount provides a stable platform for your devices.
- Attaching a Device: Align your compatible cycling computer or accessory with the installed adapter on the mount. Gently push down and twist clockwise until it clicks securely into place.
- Detaching a Device: To remove your device, twist it counter-clockwise until it releases from the adapter, then lift it off.
- Headlight/Camera Attachment: If using the bottom extension, ensure your headlight or action camera is compatible with the mounting interface and securely fastened.
5.產品特點
The CYCLAMI S2 mount offers several design advantages:
- 增強可見性： Positions your bike computer further forward, allowing for easier viewing of data without diverting attention from the road.
- 空間優化： Frees up valuable handlebar space by integrating multiple devices (computer and light) into one streamlined mount.
- 堅固的材質： Constructed from reinforced nylon, providing a strong and stable platform for your electronics, even on challenging terrain.
- 空氣動力學設計： Engineered to minimize wind resistance, contributing to a smoother ride.
Image 5.1: A visual comparison between the S1 and S2 mounts, illustrating the S2's improved design for lower wind resistance and increased length.
Image 5.2: The mount demonstrating its excellent water resistance, suitable for various weather conditions.
6. 規格
| 屬性 | 細節 |
|---|---|
| 品牌 | 環醯胺 |
| 型號名稱 | S2 |
| 顏色 | 黑色的 |
| 材料 | 增強尼龍 |
| 安裝類型 | 車把 |
| 相容的車把直徑 | 1吋 - 1.25吋（25.4毫米 - 31.8毫米） |
| 相容設備 | Garmin Edge (Touring, 830, 130 Plus, 530), XOSS, iGPSPORT, CooSpo |
| 防水等級 | 防水的 |
| 物品重量 | 0.07公斤 |
Note: Not compatible with Wahoo/Bryton devices or handlebars outside the specified diameter range.
7、維護保養
To ensure the longevity and optimal performance of your CYCLAMI S2 mount, follow these simple maintenance guidelines:
- 打掃： 定期用濕布擦拭支架amp cloth to remove dirt and grime. Avoid using harsh chemicals or abrasive cleaners, which can damage the nylon material.
- 檢查： Periodically check all screws and connections to ensure they are tight. Vibrations from cycling can sometimes loosen fasteners. Re-tighten with the Allen wrench if necessary.
- 貯存： 長時間不使用時，請將支架存放在陰涼乾燥處，避免陽光直射。
8。 故障排除
If you encounter any issues with your CYCLAMI S2 mount, refer to the following common problems and solutions:
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| Mount slides on handlebar | Clamp screws are loose. | 擰緊 clamp screws evenly with the Allen wrench. Ensure the handlebar diameter is within the compatible range. |
| Device does not attach securely | Incorrect adapter used or adapter not fully tightened. | Verify you are using the correct adapter for your device. Ensure the adapter is twisted fully and locked onto the mount. |
| Mount feels flimsy | 螺絲未完全擰緊。 | Check all mounting screws, including those for the computer adapter and bottom extension, and tighten them securely. |
如果問題仍然存在，請聯絡客戶支援。
9. 保固和支持
The CYCLAMI S2 Out Front Bike Computer Mount comes with a 1年保固 as specified in the product details. For any warranty claims or technical support, please refer to your purchase documentation or contact the seller directly.
如需進一步協助，您可以訪問 CYCLAMI 亞馬遜商店.