JUBEST 32x80 Pocket Door Frame Kit

1。 過度view

This manual provides detailed instructions for the installation, operation, and maintenance of your JUBEST 32x80 Pocket Door Frame Kit. This kit is designed to create a hidden sliding door system within a wall, optimizing space and providing a smooth, quiet operation with its two-way soft-close mechanism. The frame is constructed from galvanized steel and durable wood studs, suitable for doors weighing up to 88 lbs.

2. 安全訊息

• 安裝過程中務必配戴合適的個人防護裝備（PPE），包括安全眼鏡和手套。
• 確保工作區域暢通無阻，光線充足。
• Verify that the wall structure can support the weight of the door and the pocket door frame kit.
• Use caution when handling tools and sharp objects.
• Do not attempt to install the kit if you are unsure about any step. Consult a qualified professional.
• 讓兒童和寵物遠離安裝區域。

3. 包裝內容

Please verify that all components listed below are present in your kit:

• 4 x Square Uprights (Galvanized Steel)
• 1 x 帶木槽的鋁製軌道
• 1 個雙面緩閉裝置
• 2 個帶安裝板的掛鉤
• 2 x 柱基
• 2 x 門導軌
• 2 個緩閉觸發器
• 必要的螺絲和緊固件
• 詳細說明（本手冊）

圖 1：分解圖 view JUBEST 口袋門框套件包含的所有組件。

4. 規格

圖 2：口袋門框套件的主要尺寸和承重能力。

5. 安裝說明

For a comprehensive visual guide, please refer to the official installation video below. The following steps outline the process:

Step 1: Construct Rough Opening

Prepare the wall framing for the pocket door. Ensure the rough opening meets the minimum height of 84 1/2" (2.14m) and a width of 2X door width plus 1" (25mm). Verify the opening is level and plumb.

Step 2: Measure for Frame Header End Brackets

Set a nail at the door height plus 3/4" (19mm) or 1-1/2" (38mm) from the sub-floor, depending on your specific door height and desired gap. This marks the position for the header.

Step 3: Snap a Chalk Line

Snap a chalk line on the floor to indicate the position of the bottom track and split studs. This ensures proper alignment of the frame.

Step 4: Attach Frame Header to Rough Studs

Secure the frame header to the rough studs using appropriate fasteners. Ensure it is level and firmly attached. If using a non-standard door size, refer to the cutting instructions section.

圖 3：詳細 view of the studs, hanger, soft-close mechanism, and track. Note the steel wrapping on studs to prevent nail penetration.

Step 5: Attach Split Steel Studs

Attach the split steel studs to the header and floor chalk line. These studs provide the structural integrity for the pocket. Ensure they are plumb and evenly spaced.

Step 6: Insert Ball Bearing Hanger Wheel Assembly, Soft Close Actuators, and Triggers into Track

Carefully insert the ball bearing hanger wheel assembly, soft-close actuators, and triggers into the aluminum track. Ensure the flat side of the hanger faces inward. Position hangers alternately for even weight distribution. Adjust the soft-close mechanism as needed.

Figure 4: The precision aluminum box track design prevents the door from jumping, and convex rails ensure flexible rolling.

Step 7: Apply Desired Wall Material

Once the frame is securely installed, apply your desired wall material (e.g., drywall). Use self-tapping drywall screws to secure the material to the frame. Be mindful of screw length to avoid interfering with the door's movement.

Figure 5: The clever design allows for direct replacement of parts after drywall installation without removal.

Step 8: Seal All Edges

Seal all edges of the wall material around the door opening to ensure a clean finish and prevent drafts.

Step 9: Mount Door Plates and Mount Door

Attach the door mounting plates to the top edge of your door, ensuring they are centered and securely fastened. Then, carefully lift and mount the door onto the hanger wheels in the track. Adjust the door height as needed using the adjustment mechanism on the hangers.

Step 10: Install Finished Jambs, Split Headers, and Casing

Install the finished jambs, split headers, and casing around the door opening. Use self-tapping finish trim screws. Ensure a 3/16" (5mm) gap between the door and the jamb for smooth operation.

Step 11: Fasten Door Guides

Fasten the door guides to the floor, ensuring they align with the bottom edge of the door and maintain a 3/16" (5mm) gap for smooth movement.

Cutting Instructions for Header (if needed)

The header can be cut to accommodate different door widths. For a 32" door, no cutting is typically needed as the kit is designed for this size. For other standard door sizes (e.g., 24", 28", 30"), cutting lines are marked on the header. For custom door sizes, measure from the fixed bracket end of the header board: 2 times the door width, plus 1 inch. Remove the adjustable end bracket, cut the wood header ONLY at the marked line, then turn the header assembly over and cut the metal track 1 3/8" shorter. Replace the adjustable end bracket on the new cut end of the header. Repeat for the header trim board, cutting it at the door width plus 7/8" from the fixed bracket end.

6. 操作說明

Your JUBEST Pocket Door Frame Kit features a two-way soft-close mechanism for smooth and quiet operation. The soft-close mechanism engages automatically when the door approaches the fully open or fully closed position, gently slowing it down to prevent slamming.

To operate the door, simply push or pull it gently. The soft-close mechanism will engage automatically near the end of its travel in both directions. Avoid forcing the door, as this can damage the mechanism.

7、維護保養

• 定期清潔： Keep the track free of dust and debris. Use a soft cloth or vacuum cleaner to remove any buildup that could impede smooth operation.
• 潤滑： Periodically apply a silicone-based lubricant to the hanger wheels and track to ensure continued smooth and quiet sliding. Avoid oil-based lubricants as they can attract dust.
• 檢查緊固件： Periodically inspect all screws and fasteners to ensure they are tight. Loose fasteners can affect door alignment and operation.
• 緩閉裝置： If the soft-close mechanism is not engaging properly, check the triggers and actuators for any obstructions or misalignment. Ensure the set screws are tightened correctly.
• 零件更換： The design allows for easy replacement of parts directly after the pocket door kit is installed without removing the drywall. Refer to the installation video for guidance on accessing and replacing components.

8。 故障排除

• 門滑動不順暢： Check the track for debris. Ensure the hanger wheels are clean and lubricated. Verify that the door guides are properly aligned and not too tight.
• Soft-close not engaging: Inspect the soft-close triggers and actuators. Ensure they are positioned correctly to make contact with the door. Check if the set screws on the soft-close mechanism are securely tightened.
• Door rubbing against frame: This could indicate misalignment. Recheck the plumb and level of the frame and door. Adjust the door height using the hanger mechanism if necessary. Ensure the 3/16" (5mm) gap is maintained.
• Door feels loose or wobbly: Check all frame connections and fasteners for tightness. Ensure the split steel studs are securely attached.

9. 保固和支持

JUBEST products are manufactured to high-quality standards. This product comes with a manufacturer's warranty covering defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or contact JUBEST customer service.

If you encounter any issues or require assistance with your JUBEST Pocket Door Frame Kit, please contact our professional customer service team. We are dedicated to ensuring customer satisfaction and will help you resolve any problems in a timely manner.

聯絡資訊： Please refer to the contact details provided on the JUBEST official web網站或您的購買文件。