CONENTOOL 12V Cordless Drill Driver Kit User Manual

介紹

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your CONENTOOL 12V Cordless Drill Driver Kit. Please read this manual thoroughly before first use and keep it for future reference.

The CONENTOOL 12V Cordless Drill Driver is designed for drilling into wood, plastic, metal, and other materials, as well as for driving and removing screws. It features a powerful 35 N.m max torque, 25+1 torque settings, and two variable speeds for versatile applications.

Image: The CONENTOOL 12V Cordless Drill Driver Kit, including the drill, two batteries, charger, and a case filled with various drill bits and screwdriver bits.

重要安全說明

使用電動工具時務必遵循基本的安全預防措施，以降低火災、觸電和人身傷害的風險。

• 配戴合適的個人防護裝備（PPE），例如安全眼鏡、手套和耳塞。
• 保持工作區域清潔且光線充足。 雜亂或黑暗的區域會引發事故。
• 請勿在爆炸性環境中操作電動工具，例如有易燃液體、氣體或灰塵的情況。
• 在進行任何調整、更換配件或存放工具之前，請確保工具已關閉。
• 請使用適合您應用場景的工具。不要強行使用特定工具。
• 將閒置工具存放在兒童和其他未經培訓的人員接觸不到的地方。

產品組件和特點

Familiarize yourself with the various parts and features of your CONENTOOL Cordless Drill Driver.

Image: A detailed diagram of the CONENTOOL drill driver highlighting its key components: 3/8" keyless chuck, 25+1 adjustable clutch, LED light, variable speed switch, forward and reverse button, 2 variable speeds, and 2000 mAh lithium battery.

• 3/8" Keyless Chuck: For quick and easy bit changes. Features an all-metal automatic spindle lock.
• 25+1 Adjustable Clutch: Allows precise torque settings for various applications, preventing overtightening or stripping screws.
• LED燈： 照亮工作區域，提高黑暗空間的能見度。
• 變速開關： 可精確控制鑽孔和驅動速度。
• 前進和後退按鈕： Easily switch between drilling/driving and unscrewing.
• 2 種可變速度： Low speed (0-450 RPM) for screwing, high speed (0-1650 RPM) for drilling.
• 2000 mAh Lithium Battery: Offers long-lasting power and reliable performance.

圖：內部 view of the drill, highlighting the improved motor made of pure copper, designed for more power, durability, and quieter operation with small power loss.

Image: A graph illustrating the extended working hours provided by the 2x 2.0AH large capacity batteries compared to other batteries, showing a slower discharge rate over time.

設定

為電池充電

1. 將充電器連接到標準電源插座。
2. 將電池組滑到充電器上，直到聽到喀嚓聲為止。
3. Allow the battery to charge fully before first use. The indicator light on the charger will change when charging is complete.
4. Always disconnect the charger from the power supply and remove the battery once fully charged.

安裝/取出電池

• 安裝方法：將電池組與電鑽手柄底部對齊，然後將其滑入直至牢固鎖定。
• 取出電池：按下電池釋放按鈕（通常位於電池組側面），然後將電池滑出。

安裝/拆卸鑽頭或螺絲起子頭

Image: A close-up showing the operation of the 3/8" (10mm) self-locking drill chuck, demonstrating how to open and close it to insert or remove bits.

1. 確保電鑽已關閉，並且正反轉開關處於中間（鎖定）位置。
2. 逆時針旋轉卡盤以打開夾爪。
3. 將所需的鑽頭或螺絲起子頭完全插入夾頭中。
4. 順時針旋轉卡盤，將卡爪牢固地夾緊鑽頭。確保鑽頭居中並被牢固夾持。
5. 拆卸方法：逆時針旋轉卡盤以鬆開夾爪，然後將鑽頭拔出。

操作說明

選擇速度

Image: A visual representation of the two-speed levels: 0-450 RPM for drilling holes in various materials (Speed 1) and 0-1650 RPM for tightening or loosening screws (Speed 2).

• Speed 1 (Low, 0-450 RPM): Ideal for driving screws, larger diameter drilling, or applications requiring higher torque.
• Speed 2 (High, 0-1650 RPM): Suitable for smaller diameter drilling and applications requiring faster speed.
• Adjust the speed by sliding the gear selector switch located on top of the drill.

Adjusting Torque (Clutch Setting)

Image: A chart illustrating the drill's multifunctional capabilities, showing increasing torque/power levels suitable for screws, wood, ceramics, brick, concrete, and steel, with distinct settings for drilling and screwdriving.

• The torque adjustment ring is located behind the chuck. Rotate it to select the desired torque setting from 1 to 25.
• The higher the number, the greater the torque. Start with a lower setting and increase as needed to prevent overtightening or damaging the workpiece.
• Use the drill symbol setting for drilling applications, which provides maximum torque without clutch engagement.

正向/反向操作

• Push the forward/reverse selector switch (located above the trigger) to the left for forward rotation (drilling/driving screws).
• 將開關向右推可反轉（卸下螺絲）。
• For safety, place the switch in the center position to lock the trigger and prevent accidental starting.

操作鑽孔機

1. Ensure the correct bit is installed and the battery is charged.
2. 根據您的任務選擇合適的轉速和扭力設定。
3. 將鑽頭對準工件。
4. Press the trigger to start the drill. The LED light will illuminate the work area.
5. 施加穩定均勻的壓力。不要用力過猛。
6. 鬆開扳機以停止鑽孔。

Image: A user demonstrating the versatility of the CONENTOOL drill, shown both drilling into wood and driving a screw into a wall, illustrating its practical application.

維護

一般清潔

• 清潔前請務必斷開電池組。
• 用乾淨的布擦拭工具。amp 布。請勿使用刺激性化學物質或研磨性清潔劑。
• 保持通風口暢通，清除灰塵和碎屑，防止過熱。必要時可使用壓縮空氣。

電池保養

• 將電池存放在陰涼、乾燥的地方，避免陽光直射和極端溫度。
• 請勿將電池長時間處於放電狀態。不使用時，請定期充電。
• 請勿使電池端子短路。

配件護理

• Clean drill bits and screwdriver bits after use.
• Store accessories in the provided carrying case to prevent damage and loss.

故障排除

規格

隨附配件

Image: A display of all accessories included in the kit, such as the cordless drill, flexible drill shank, various drill bits, screwdriver bits, socket spanner, connection head, charger, rechargeable batteries, and carrying case.

• 1 x Cordless Drill
• 1 x Flexible Drill Shank
• 6 x Conventional Drill Bits
• 6 個長螺絲起子頭
• 9 x Socket Spanners
• 10 個螺絲起子頭
• 2 x Connection Heads
• 1 個充電器
• 2 x Rechargeable Batteries (2000 mAh each)
• 1 個手提箱

保固和支持

CONENTOOL is committed to providing high-quality products. For any questions regarding your product, please refer to the seller's contact information or Amazon's customer service.

While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims.

For further assistance or technical support, please contact the seller Zhen Hui Xiang EU through the Amazon platform.