NEXPEAK NC175 SAE 延長線充電器和維護器使用手冊
型號：NC175
1. 產品結束view
The NEXPEAK NC175 SAE Extension Cable is designed to provide a convenient and reliable connection for battery chargers and maintainer units. It features durable battery clips for direct connection to battery terminals and an SAE connector for compatibility with various charging devices. This cable is ideal for extending the reach of your charger or for easily connecting to batteries in different applications.
Image 1.1: The NEXPEAK NC175 SAE Extension Cable showing the red positive battery clip, black negative battery clip, and the SAE quick disconnect plug.
2. 安全訊息
Please read and understand all safety instructions before using the NEXPEAK NC175 cable. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the battery charger/maintainer is disconnected from the power source before connecting or disconnecting the battery clips.
- 將紅色（正極）夾子連接到電池的正極（+）端子，將黑色（負極）夾子連接到電池的負極（-）端子。
- Avoid short-circuiting the battery clips by allowing them to touch each other.
- 請在通風良好的地方使用。電池會產生爆炸性氣體。
- 請將本品放在兒童接觸不到的地方。
- Do not use if the cable or clips are damaged.
3. 包裝內容
- 1 x NEXPEAK NC175 SAE Extension Cable with Battery Clips
4. 設定
The NEXPEAK NC175 cable is designed for simple plug-and-play operation with compatible SAE connectors.
- 識別電瓶接線端子： 找到電池上的正極（+）和負極（-）。正極通常標有加號，而且比較大；負極則標有減號。
- 連接到電池：
- 連接 紅色的 battery clip to the 陽性 (+) battery terminal. Ensure a secure connection.
- 連接 黑色的 battery clip to the 負數（-） battery terminal. Ensure a secure connection.
- Connect to Charger/Maintainer: Plug the SAE connector end of the NC175 cable into the corresponding SAE port on your battery charger or maintainer unit. Ensure the connection is firm.
5. 操作說明
Once the NEXPEAK NC175 cable is securely connected to both the battery and the charger/maintainer, you can proceed with operating your charging device according to its own instructions. The NC175 cable acts as an extension and connection point.
- Ensure all connections are tight before activating the charger.
- Monitor the charging process as recommended by your charger's manual.
- To disconnect, first turn off and unplug your charger/maintainer from the power source. Then, disconnect the SAE connector, followed by the black (-) battery clip, and finally the red (+) battery clip.
6、維護保養
Proper maintenance will extend the life of your NEXPEAK NC175 cable.
- 打掃： Wipe the cable and clips with a dry, clean cloth after each use. Do not use harsh chemicals or abrasive cleaners.
- 貯存： Store the cable in a dry, cool place, away from direct sunlight and moisture. Ensure the clips are not touching each other or any conductive materials during storage.
- 檢查： Periodically inspect the cable for any signs of damage, such as frayed wires, cracked insulation, or corroded clips. If damage is found, discontinue use immediately.
7。 故障排除
若遇到問題，請參考以下常見問題及解決方法：
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| Charger not detecting battery. | Loose or incorrect connection of battery clips or SAE connector. | Ensure red clip is on positive (+), black clip on negative (-). Verify SAE connector is fully inserted. |
| 電纜似乎已損壞。 | Physical wear and tear or improper handling. | Discontinue use immediately. Do not attempt to repair. Replace the cable. |
For issues not listed here, please refer to the troubleshooting section of your battery charger/maintainer's manual or contact NEXPEAK customer support.
8. 規格
| 模型 | NC175 |
| 品牌 | 耐思峰 |
| 產品尺寸 | 5.9 x 5.1 x 1.58 inches (approximate cable length and clip size) |
| 物品重量 | 3.04 盎司 |
| 輸入音量tage (Compatibility) | Compatible with chargers up to 240 Volts (refer to your charger's specifications) |
| 連接器類型 | SAE Quick Disconnect, Battery Alligator Clips |
9. 保固和支持
NEXPEAK products are manufactured to high-quality standards. For warranty information or technical support, please visit the official NEXPEAK web請造訪網站或聯絡他們的客戶服務部門。請保留您的購買收據作為購買憑證。
如需進一步協助，請造訪： NEXPEAK Official Store on Amazon