泰克威amp Control System JCB36N1-110 User Manual

1。 過度view

The Tekswamp Control System JCB36N1-110 is a power supply unit designed for stand-up electric desks. It provides the necessary DC 24V 5A output to power the linear actuators of your desk, enabling smooth height adjustments. This unit is manufactured by Jiecang Linear Motion and is built with quality materials to ensure reliable and safe operation.

Figure 1.1: Tekswamp Control System JCB36N1-110 with included power cord.

2. 包裝內容

請確認您的包裹含有下列所有物品：

• 1 x Control System JCB36N1-110
• 1 x電源線

3. 安全訊息

To ensure safe and efficient operation of your control system, please adhere to the following safety guidelines:

• 僅限室內使用： This device is intended for indoor use in dry environments. Do not expose it to water, moisture, or extreme temperatures.
• Compatible Actuators: This control system is designed for use with two linear actuators. Using it with a different number of actuators may lead to malfunction or damage.
• 工作週期： The unit has a duty cycle of 10%, with a maximum of 2 minutes of continuous operation followed by a minimum of 18 minutes of rest. Exceeding this duty cycle can cause internal overheating and reduce the lifespan of the device.
• 電源需求： 確保輸入量tage matches the specifications (100-120VAC~4.2A 50/60Hz).
• 正確連接： Always ensure correct polarity, voltage, and tip size when connecting to your device to prevent damage.
• 通風： Do not obstruct the ventilation openings of the control system. Ensure adequate airflow around the unit.

4. 規格

Detailed technical specifications for the Control System JCB36N1-110:

Figure 4.1: Product label detailing electrical specifications and model number.

5. 設定

5.1 連接電源

1. Locate the AC input port on the control system.
2. Connect the provided power cord to the AC input port of the control system.
3. Plug the other end of the power cord into a standard 100-120VAC wall outlet.

Figure 5.1: Connecting the AC power cord to the control system.

5.2 Connecting to the Electric Desk

The control system features dedicated ports for connecting to your stand-up electric desk's linear actuators and control panel.

1. Identify the M1 and M2 output ports on the control system. These are typically 6-pin connectors.
2. Connect the cables from your desk's linear actuators to the M1 and M2 ports. Ensure a secure connection.
3. If your desk has a separate control panel or handset, connect its cable to the designated port (often labeled 'F' or 'HS' for handset).

Figure 5.2: Output ports for linear actuators (M1, M2) and handset (F, HS).

6. 操作說明

Once the control system is properly connected to the power source and your electric desk, it is ready for operation. Use your desk's integrated control panel to adjust the height. Remember to observe the duty cycle of the control system: a maximum of 2 minutes of continuous operation, followed by a minimum of 18 minutes of rest. This ensures the longevity and stable performance of the unit.

7、維護保養

The Control System JCB36N1-110 requires minimal maintenance. Follow these guidelines to keep your unit in optimal condition:

• 打掃： 請使用柔軟的乾布擦拭設備外部。請勿使用液體清潔劑或研磨性材料。
• 環境： Keep the control system in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
• 纜線管理： 確保所有電纜佈線整齊，沒有被擠壓或拉扯，以防損壞。

8。 故障排除

If you encounter issues with your control system, refer to the following common problems and solutions:

• 桌子不動：
  • Ensure the power cord is securely plugged into both the control system and the wall outlet.
  • Verify that the cables from the linear actuators and control panel are correctly and securely connected to the control system's ports (M1, M2, F/HS).
  • 透過插入其他設備來檢查牆壁插座是否正常運作。
• Intermittent Operation or Stops During Adjustment:
  • The unit may have reached its duty cycle limit (2 minutes of operation). Allow the unit to rest for at least 18 minutes before attempting further adjustments.
  • Ensure the desk is not overloaded beyond its weight capacity, as this can strain the system.
• 異常噪音或氣味：
  • Immediately disconnect the power supply from the wall outlet.
  • Contact customer support for assistance. Do not attempt to open or repair the unit yourself.
• Power Light Not On (if applicable):
  • Confirm the power cord is fully inserted and the wall outlet has power.
  • Check for any tripped circuit breakers in your electrical panel.

如果以上步驟未能解決問題，請參閱保固和支援部分以取得進一步協助。

9. 保固和支持

泰克威amp products are professionally tested and designed for quality and reliability. This adapter includes multiple smart features for safeguarding against incorrect voltag例如，短路和內部過熱。

For any questions, technical support, or warranty inquiries, please contact Tekswamp customer service. You can find more information and contact details by visiting the official Tekswamp store on Amazon:

Visit the Tekswamp 店鋪