kactoily 6 in 1-B
User Manual: Upgraded 6 in 1 Aquarium Water Test Monitor
Model: 6 in 1-B | Brand: kactoily
1. 產品結束view
The kactoily Upgraded 6 in 1 Aquarium Water Test Monitor provides real-time monitoring of six crucial water parameters: pH, Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity, Specific Gravity (SG), and Temperature. Designed for both freshwater and saltwater environments, this device helps maintain a healthy aquatic ecosystem by providing accurate and simultaneous readings on its clear LCD display.
Its split design allows for easy probe replacement, and the platinum probes ensure a longer lifespan and more accurate detection, even when submerged.

The monitor features a compact display unit and a separate probe, allowing for flexible installation and continuous monitoring of your aquarium's water quality. It is suitable for various aquatic environments, including fish tanks and ponds.
2. 包裝內容
- 1x 探頭
- 1 個顯示單元
- 1x Extension Line (29.5cm)
- 6x pH Buffer Powder packets
- 6x 吸盤
- 2x Magnetic Stickers
- 1x Charger Plug
- 2 根 USB 充電線
- 1份使用手冊(本文檔)
3. 設置指南
Follow these steps to set up your kactoily Aquarium Water Test Monitor:
- 拆開組件包裝: 小心地從包裝中取出所有物品,並與「包裝盒內物品清單」進行核對。
- Connect Probe and Display: Connect the probe to the display unit using the provided extension line. Ensure a secure connection.
- 開機: Connect the charger plug to a power outlet and then to the display unit using one of the USB charging cables. The device is designed for continuous 24/7 monitoring.
- Positioning the Probe:

Use the suction cups or magnetic stickers to securely attach the probe inside your aquarium. Ensure the probe is fully submerged between the "Max level" and "Min level" markings for accurate readings. The probe is designed to work underwater and has platinum electrodes for enhanced longevity and accuracy.
- Positioning the Display Unit: Place the display unit in a convenient location near the aquarium where you can easily view the readings. The split design allows for flexible placement.
可視化設定指南
影片說明: This video demonstrates the physical setup of the Kactoily 6-in-1 Water Monitor, showing how to connect the probe to the display unit and place the probe in the aquarium. It highlights the wireless connectivity feature and the compact size of the display.
4. 操作說明
The monitor provides continuous real-time readings of your aquarium's water parameters. The LCD display shows all six parameters simultaneously.

顯示讀數: The main display shows Salinity (%), Specific Gravity (SG), pH, Temperature (°C), Total Dissolved Solids (TDS in ppm), and Electrical Conductivity (EC in us/cm). The backlight ensures clear visibility.
校準和調整
Regular calibration ensures the accuracy of your measurements. The device supports manual calibration and adjustment.

pH 值校準: Use the provided pH buffer powders to calibrate the pH reading. Follow the on-screen instructions for pH-CAL-2 and pH-CAL-3. For precise adjustments, use the pH-Adj function.
EC校準: The device also allows for EC-set calibration.
溫度調節: If necessary, the temperature reading can be adjusted via the Temp-set option.
Refer to the on-screen menu for detailed steps on accessing these calibration and adjustment functions. The "Setting/Next" button navigates through options, and "Confirm" applies changes.
5、維護保養
To ensure the longevity and accuracy of your kactoily Aquarium Water Test Monitor, regular maintenance is recommended:
- 探頭清潔: Periodically clean the probe to prevent buildup of algae or mineral deposits, which can affect accuracy. Use a soft brush and distilled water.
- 校準: Calibrate the device regularly, especially the pH sensor, using fresh buffer solutions. The frequency depends on usage and water conditions.
- 貯存: When not in use for extended periods, ensure the probe is clean and stored in a suitable solution (e.g., KCL storage solution or pH 4 buffer) to keep the sensor hydrated.
- 電纜檢查: 檢查所有電纜和連接處是否有磨損或損壞跡象。
6。 故障排除
If you encounter issues with your monitor, try the following:
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 讀數不準確 | Probe dirty or needs calibration; sensor aging. | Clean the probe. Perform a full calibration using fresh buffer solutions. If issues persist, the probe may need replacement. |
| 顯示器不亮 | 電源線斷開;電源適配器故障。 | Ensure all power connections are secure. Try a different USB charging cable or power adapter. |
| No Readings for a Parameter | Probe not fully submerged; damaged probe. | Ensure the probe is submerged past the minimum level. Inspect the probe for visible damage. |
如果故障排除步驟未能解決問題,請聯絡客戶服務。
7. 規格
| 範圍 | 細節 |
|---|---|
| 產品名稱 | Upgraded 6 in 1 Aquarium Water Test Monitor |
| 模型 | 6 in 1-B |
| 品牌 | kactoily |
| 實測參數 | pH, TDS, EC, Salinity, SG, Temperature |
| 設計 | Split design (separate probe and main unit) |
| 探頭類型 | Platinum Probes |
| 溫度補償 | 自動溫度補償(ATC) |
| 相容性 | Freshwater and Saltwater |
| 物品重量 | 1.66磅 |
| 包裝尺寸 | 11.81 x 3.74 x 2.36 英寸 |
8. 保固和客戶支持
kactoily is confident in the quality of this digital pH meter and provides warranty or refund for it. If you have any questions or require assistance with your product, please do not hesitate to contact our customer service team. We are committed to solving your problems within 24 hours.
客戶服務: 全天候提供。
For further support, you may visit the official kactoily store on Amazon: kactoily Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.