AIYIMA A07 MAX Amp使用說明書

介紹

AIYIMA A07 MAX 是一款功能全面的雙聲道立體聲揚聲器。 amp這款擴大機專為家庭音響系統設計，採用D類功率擴大機。 amplifier with a TPA3255 chip, capable of delivering up to 300W per channel in stereo mode or 600W in bridgeable mono mode. Its compact design makes it suitable for various applications, easily setting up your bookshelf/desktop/home theater. The AIYIMA A07 Max is engineered to provide clear and spacious sound quality for passive speakers.

主要特點

• 雙模式操作： Switchable between 300W+300W stereo amplifier mode and 600W bridgeable mono amp升壓模式。
• 高功率輸出： Delivers up to 600 Watts (300W x 2 at 4 ohm) in stereo, or 600W in mono mode, suitable for 2-8Ω speakers.
• 增強散熱： Features a solid design with side and bottom vents to maximize heat dissipation and extend device lifespan.
• Premium Audio Components: Utilizes TI TPA3255 Class D amplifier chip, NE5532 Op-amp chip, Japanese, ELNA, and German WIMA capacitors, and an IT Power management chip for high-fidelity sound.
• 卓越的性能： Achieves a Signal-to-Noise Ratio (SNR) of up to 110dB, ensuring clarity and low distortion.
• 3.5mm線路輸出： Allows connection to another A07 MAX unit or active device for building a high-power dual-channel system.
• 隨附的電源轉接器： Comes with a DC36V 6A power adapter for immediate use.

包裝內容

打開包裝後，請檢查所有物品是否齊全且完好：

• AIYIMA A07 MAX Amp升壓機組
• DC36V 6A 電源轉接器

產品結束view

圖 1：正面 view of the AIYIMA A07 MAX amplifier, showing the volume knob and mode indicators.

圖 2：結束view 的 amplifier's front panel with volume control and indicators, and the rear panel with input/output connections.

圖 3：示意圖 amplifier's shell heat dissipation design, highlighting the side and bottom vents.

圖4： View of the bottom of the amplifier, showing the recessed Mono/Stereo mode switch.

圖 5：特寫 amplifier's internal components, including WIMA capacitors, Rubycon capacitors, TI power management chip, and phase mode inductance.

Figure 6: Detail showing the replaceable Op-Amp 在 amplifier's circuit board, indicating compatibility with various DIP8 dual op-amps.

設定

1. 連接揚聲器

The A07 MAX supports passive bookshelf speakers with an impedance of 2-8Ω. Use high-quality speaker cables for optimal performance.

1. Connect the positive (+) terminal of your speaker to the positive (+) speaker output terminal on the A07 MAX.
2. Connect the negative (-) terminal of your speaker to the negative (-) speaker output terminal on the A07 MAX.
3. 確保所有連接牢固，以防止短路。

2. 音訊輸入連接

Connect your audio source (e.g., phone, tablet, laptop, PC, DVD, MP3 player, TV) to the RCA input jacks on the rear of the A07 MAX using an RCA cable.

3. 電源連接

Connect the provided DC36V 6A power adapter to the DC input port (interface size: 5.5*2.5MM) on the rear of the amp先將擴大機置於電源插座上，然後將轉接器插入牆壁插座。

4. Stereo/Mono Mode Selection

The A07 MAX features a switch on the bottom of the unit to select between Stereo (BTL) and Mono (PBTL) modes. This allows for flexible usage scenarios, including bridging two A07 MAX units for a powerful mono setup.

Figure 7: Diagram illustrating the correct connection method for two A07 MAX units in mono mode, connected to a pre-amp放大器/DAC。

For mono mode, connect the speaker to the binding posts labeled "+ Mono Mode -" and use the "L" (left) RCA input for the audio signal. If using two A07 MAX units for a stereo mono-block setup, connect the left channel output from your pre-amp to the "L" input of one A07 MAX (set to mono) and the right channel output to the "L" input of the second A07 MAX (also set to mono).

設定示範影片

操作說明

1. 電源開/關和音量控制

The large knob on the front panel serves as both the power switch and the volume control. Rotate clockwise to turn on the unit and increase volume. Rotate counter-clockwise to decrease volume and turn off the unit.

2. 模式指示燈

Two blue LEDs on the front panel indicate the current operating mode:

• Stereo Mode Indicator: 亮起時 amplifier is set to stereo mode.
• Mono Mode Indicator: 亮起時 amplifier is set to mono mode.

3. Using the 3.5mm AUX Line Output

The 3.5mm AUX line output on the rear panel provides a pass-through from the RCA inputs. This output is not controlled by the A07 MAX's volume knob and can be used to connect to another active device, such as a powered subwoofer or another amplifier for a multi-amp液化器設定。

4. 歐-Amp 替換（進階使用者）

The A07 MAX allows for the replacement of its Op-Amp小號（操作 Amplifiers) for users who wish to customize the sound signature. The unit is compatible with DIP8 dual op-amps such as OPA2604AP, OPA2134, MUSE01/02/03, LME49720NA, LM4562, AD827AQ, etc. Refer to Figure 6 for the location of the replaceable Op-Amp.

Caution: Op-Amp replacement should only be performed by users familiar with electronic components and proper handling procedures. Incorrect installation can damage the unit and void the warranty.

維護

1. 清潔

To maintain the appearance and functionality of your amplifier, regularly wipe the exterior with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.

2. 散熱

The A07 MAX is designed with efficient heat dissipation through its side and bottom vents. Ensure that these vents are not obstructed when placing the amplifier. Adequate airflow is crucial for optimal performance and longevity of the device.

故障排除

規格

Figure 8: Detailed power output specifications for the A07 MAX under various supply power and speaker impedance conditions in both BTL Stereo and PBTL Mono modes.

Figure 9: Frequency response graph of the AIYIMA A07 MAX amplifier, indicating its audio performance across different frequencies.

Figure 10: Signal-to-Noise Ratio (SNR) graph of the AIYIMA A07 MAX amplifier, demonstrating its low noise performance.

保固和支持

AIYIMA products, including the A07 MAX amplifier, typically come with a 2年保固. For warranty claims, technical support, or any inquiries regarding your product, please contact AIYIMA customer service through their official channels or the seller "Yima Top" on Amazon.

For more information about AIYIMA Audio Company, you can watch the following video: