pooboo D618 磁阻室內動感單車使用手冊

一、簡介

Thank you for choosing the pooboo D618 Magnetic Resistance Indoor Cycling Bike. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new exercise equipment. Please read this manual thoroughly before use and retain it for future reference.

The pooboo D618 is designed for home gym use, offering a smooth and quiet cycling experience with its magnetic resistance and belt drive system. It features adjustable components to accommodate various user heights and includes a basic LCD monitor for tracking workout data.

2. 安全訊息

Before beginning any exercise program, consult with your physician. It is important to understand and follow all safety precautions to prevent injury and ensure proper operation of the equipment.

一般安全警告：

• 務必將健身自行車放置在平坦、穩定的表面上。
• 確保自行車周圍有足夠的空間，以便安全騎行和移動。
• 使用設備時，請讓兒童和寵物遠離設備。
• 穿著合適的運動鞋和運動服。避免穿著寬鬆的衣物，以免被運動部件纏住。
• 每次使用前，請檢查自行車是否有鬆動或損壞的零件。若任何零件損壞，請勿使用。
• 請勿超過最大使用者體重 300 磅（136 公斤）。
• The emergency brake knob (push down on the resistance knob) should be used to stop the flywheel quickly in case of an emergency.
• 飛輪完全停止轉動前，請勿下車。

用戶要求：

• 高度範圍： 4'8" – 6'4" (142 cm – 193 cm)
• Weight Maximum: 300 磅（136 公斤）
• Inseam Capacity: 27.5" – 36.6" (70 cm – 93 cm)

3. 包裝內容

Before assembly, ensure all parts are present. Some screws may be pre-assembled on the main frame. Refer to the included parts diagram for identification.

• 主機架
• 前穩定器
• 後穩定器
• 車把
• 車把
• 座桿
• 座位
• 左踏板
• 右邊踏板
• 液晶顯示器
• 平板電腦支架
• 水瓶架
• 五金套件（螺栓、墊圈、螺帽、工具）
• 使用者手冊

4. 組裝說明

Assembly typically takes about 20-30 minutes. Follow these general steps. Refer to the detailed assembly diagram provided in your package for specific bolt and part placements.

1. 連接穩定器： 使用提供的螺栓和墊圈將前後穩定器固定到主框架上。確保它們擰緊牢固，以確保穩定性。
2. 安裝踏板： Identify the Left (L) and Right (R) pedals. The left pedal tightens counter-clockwise, and the right pedal tightens clockwise. Thread them carefully into the crank arms and tighten firmly.
3. 安裝座桿和座墊： Insert the seat post into the main frame and adjust to a preliminary height. Attach the seat to the seat post.
4. 安裝車把立管和車把： Insert the handlebar post into the main frame. Attach the handlebars to the handlebar post. Connect any sensor wires if applicable.
5. Attach LCD Monitor and Tablet Mount: Secure the LCD monitor to the handlebar assembly. Install the tablet mount onto the handlebars.
6. 安裝水瓶架： Attach the water bottle holder to the designated location on the frame.
7. 最終檢查： Review all connections and ensure all bolts are tightened. Test the stability of the bike before first use.

5. 調整

正確調整座椅和車把對於舒適度和有效的運動至關重要。

座椅調整：

• 高度： Loosen the adjustment knob on the vertical seat post. Raise or lower the seat until your leg has a slight bend at the knee when the pedal is at its lowest point. Tighten the knob securely.
• 向前向後： Loosen the adjustment knob under the seat. Slide the seat forward or backward to achieve a comfortable position relative to the handlebars. Ensure the knob is fully tightened after adjustment.

車把調整：

• Loosen the adjustment knob on the handlebar post. Raise or lower the handlebars to a comfortable height that allows for a relaxed posture without excessive strain on your back or shoulders. Tighten the knob securely.

腳踏帶調整：

• Adjust the straps on the toe-caged pedals to secure your feet firmly. This prevents your feet from slipping during intense cycling.

6. 操作

磁阻系統：

• The pooboo D618 features an infinite magnetic resistance system. To increase resistance, turn the red knob clockwise. To decrease resistance, turn it counter-clockwise.
• For emergency stops, press the red resistance knob down firmly. This will engage the emergency brake and quickly stop the flywheel.

液晶顯示器功能：

The integrated LCD monitor tracks your workout data. Insert 2 AAA batteries (not included) into the monitor before first use.

• 掃描： 自動循環播放所有功能。
• 時間： 顯示您的運動時長。
• 速度： 顯示您目前的騎乘速度。
• DIST（距離）： 記錄您運動期間的運動距離。
• CAL（卡路里）： 估算消耗的卡路里。
• ODO（里程表）： 顯示總累計距離。
• 脈衝： 握住車把上的脈搏感應器時，即可顯示您的心率。

Press the red button on the monitor to switch between modes or reset values (hold for a few seconds to reset most values).

靜音皮帶傳動系統：

The pooboo D618 utilizes a durable belt drive system, ensuring a smooth and quiet operation, typically below 20 dB. This design minimizes noise, allowing for workouts without disturbing others.

7、維護保養

Regular maintenance helps prolong the life of your exercise bike and ensures safe operation.

• 打掃： 用廣告擦拭自行車amp 每次使用後用布擦拭，去除汗漬和灰塵。避免使用研磨性清潔劑或溶劑。
• 檢查： 定期檢查所有螺栓、螺帽和活動部件的緊固。擰緊任何鬆動的部件。
• 潤滑： The belt drive system is generally maintenance-free. Do not apply lubricants to the belt or flywheel unless specifically instructed by customer support.
• 貯存： Store the bike in a dry, cool place away from direct sunlight and extreme temperatures. The front transport wheels allow for easy relocation.

8。 故障排除

If you encounter issues with your pooboo D618 bike, refer to the following common problems and solutions.

9. 規格

10. 保固和客戶支持

pooboo is committed to providing excellent customer satisfaction.

保固單：

Your pooboo D618 Magnetic Resistance Indoor Cycling Bike comes with a 1-year Free Replacement for all parts from the date of purchase. This warranty covers manufacturing defects and component failures under normal use.

客戶支援：

If you have any questions regarding assembly, operation, maintenance, or warranty claims, please do not hesitate to contact pooboo customer service. Our team is available to assist you with any concerns.

Please refer to the contact information provided on your purchase receipt or the official pooboo web提供最新支援管道的網站。