介紹
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your GAOMON Full Size Velvet Button Tufted Bed Frame, Model SBH01DF. Please read this manual thoroughly before assembly and retain it for future reference.
Image: The GAOMON Full Size Velvet Button Tufted Bed Frame, featuring a grey velvet headboard and footboard with button tufting, supported by a gold-finished metal frame, shown in a bedroom setting.
安全資訊
- 在開始組裝之前，請確保所有零件均存在且未損壞。
- 將床架組裝在柔軟、乾淨的表面上，以防止刮傷。
- 組裝時請勿過度鎖緊螺絲，以免滑絲。
- 定期檢查所有連接，確保其牢固可靠。
- 請勿超過 800 磅的最大承重能力。
- 組裝過程中，請將小零件放在兒童接觸不到的地方。
零件清單
組裝前，請確認包裝內包含以下所有組件：
- A. Headboard Panel (1)
- B. Footboard Panel (1)
- C. 側軌 (2)
- D. 中心支撐梁（1）
- E. Metal Slats (approx. 12-14)
- F. Support Legs (4-6, including center leg)
- G. 五金配件包（螺絲、墊圈、內六角扳手）（1）
圖片：詳細 view of the bed frame's structural components, including strong support slats, sound-absorbing sponge for noise reduction, robust bed legs, and floor protection feet.
安裝和組裝
Follow these steps for proper assembly. It is recommended to have two people for assembly.
- 拆開組件包裝： Carefully remove all parts from the packaging and lay them out on a clean, soft surface. Identify each component using the parts list.
- 將側軌固定在床頭板上： Connect the side rails (C) to the headboard panel (A) using the provided screws and Allen wrench from the hardware pack (G). Ensure connections are secure but do not fully tighten yet.
- 將側軌固定在床尾板上： Connect the other end of the side rails (C) to the footboard panel (B). Again, secure with screws but do not fully tighten.
- 安裝中心支撐梁： Attach the center support beam (D) to the designated brackets on the headboard and footboard. Ensure it is centered and level.
- 放置金屬條： Position the metal slats (E) across the side rails, ensuring they are evenly spaced and securely fastened to the frame. The design provides sufficient support without a box spring.
- 安裝支撐腳： Attach any additional support legs (F) to the center beam or other designated areas as per the included diagram.
- 最後緊固： Once all components are in place and aligned, systematically tighten all screws and bolts until secure. Do not overtighten.
Image: Diagram illustrating the full dimensions of the bed frame (78.3"L x 53.9"W x 46"H) and its maximum weight capacity of 800 lbs.
操作說明
The GAOMON bed frame is designed for use with a mattress directly on its steel slat support system, eliminating the need for a box spring.
- 床墊放置： Carefully place your full-size mattress onto the assembled slat system. Ensure the mattress is centered and fully supported by the frame.
- 重量分佈： Distribute weight evenly across the bed frame. The maximum weight capacity is 800 lbs, including the mattress and occupants.
- 床下收納空間： The frame provides approximately 12.6 inches of clearance for under-bed storage. Utilize this space for bins or boxes as needed.
Image: The GAOMON bed frame positioned in a bedroom, showcasing its design and the available space underneath for storage baskets.
影像： View showing the under-bed clearance of 12.6 inches, suitable for storage containers, with the overall frame height of 17.7 inches from the floor to the top of the side rail.
維護
- 清潔框架： 用柔軟的布擦拭金屬表面。amp 布。 避免使用磨蝕性清潔劑。
- Cleaning the Velvet Headboard/Footboard: 日常清潔，可使用軟毛刷或帶有織物吸頭的吸塵器。如有液體灑出，請立即用乾淨的乾布吸乾，切勿搓揉。頑固污漬，請諮詢專業織品清潔公司。
- 硬體檢查： Periodically (every 3-6 months) check all bolts and screws to ensure they are tight. Retighten if necessary to maintain stability and prevent noise.
圖片：特寫 view of the grey velvet button-tufted headboard, highlighting the fabric texture and button details, demonstrating the quality of the upholstery.
故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 床架發出吱吱聲或噪音。 | Loose bolts or connections; uneven floor. | Check and tighten all bolts and screws. Ensure slats are properly seated. Verify the bed is on a level surface. |
| 床架感覺不穩定。 | 組裝不當或連接鬆動。 | Verify all assembly steps were followed correctly. Ensure all hardware is fully tightened. Check if the bed is on an even surface. |
| 到貨時零件缺失或損壞。 | 製造缺陷或運輸損壞。 | Contact GAOMON customer support immediately for replacement parts. Provide proof of purchase and details of the issue. |
規格
- 模型： SBH01DF
- 尺寸： 滿的
- 產品尺寸（長x寬x高）： 78.3 英寸 x 53.9 英寸 x 46 英寸
- 材料： High-quality metal frame, Velvet upholstery
- 顏色： 灰色的
- 承重能力： 800 磅
- 物品重量： 80磅
- 特點： No Box Spring Needed, Squeak Resistant design
- 組裝要求： 是的
- Headboard Thickness: 1.4 inches (soft package)
- 床底淨空： 12.6英寸
Image: Close-up showing the soft package thickness of the headboard, measured at 1.4 inches, indicating comfortable padding and construction detail.
保固和支持
GAOMON products are manufactured with quality and durability in mind. While specific warranty terms may vary, GAOMON typically offers support for manufacturing defects. For detailed warranty information or to report missing/damaged parts, please contact GAOMON customer service.
客戶支援： For assistance, please refer to the contact information provided with your purchase or visit the official GAOMON website. Please have your model number (SBH01DF) and purchase details ready when contacting support.