介紹
This manual provides detailed instructions for assembling and operating your UGEARS Mini Helicopter mechanical 3D puzzle. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
安全資訊
警告：窒息危險 - 小零件。
This product is not suitable for children under 3 years due to small parts. Keep all components out of reach of young children. Adult supervision is recommended during assembly.
包裝內容
開始組裝前，請確認以下列出的所有組件都已包含在您的套件中。
Image: All components included in the UGEARS Mini Helicopter kit, laid out on a surface. This includes several sheets of laser-cut plywood, a small bag of rubber bands, a length of fishing line, a block of paraffin wax, a piece of sandpaper, and the instruction manual.
- Laser-cut plywood boards
- 橡皮筋
- 釣魚線
- 石蠟
- 砂紙
- Illustrated Instruction Booklet
筆記： No glue or special tools are required for assembly. All parts interlock precisely.
組裝說明
The UGEARS Mini Helicopter model kit consists of 167 precision-cut pieces. The estimated assembly time is approximately 3 hours. Carefully follow the detailed, illustrated instructions provided in the included booklet for step-by-step guidance.
重要的： Gently remove parts from the plywood sheets. Use the provided sandpaper and paraffin wax as instructed to ensure smooth movement of all mechanical parts. Proper waxing is crucial for optimal functionality.
Image: A hand carefully detaching a small, intricate wooden piece from a larger plywood sheet, demonstrating the initial step of assembly.
Image: Two hands interlocking wooden components of the helicopter, illustrating the glue-free assembly process.
For additional visual guidance, refer to the official assembly video below:
Video: An official UGEARS video demonstrating key assembly steps and the functionality of the Mini Helicopter model.
操作說明
Once fully assembled, your UGEARS Mini Helicopter features a rubber band motor for dynamic movement and interactive features.
Activating the Mechanism
To activate the main and tail rotors, gently wind the rubber band motor as indicated in the instruction booklet. Once wound, release the mechanism to observe the rotors spinning. The model can travel approximately 150 cm on a flat, smooth surface.
Image: A hand interacting with the assembled helicopter, demonstrating how to prepare the mechanical components for movement.
Dynamic Features
- Rotating Main and Tail Rotors: The primary and tail rotors are designed to spin when the internal mechanism is engaged.
- Retractable Rear Wheels: The rear wheels can be manually retracted or extended for display or movement.
- 開門： The cockpit doors can be opened and closed.
- Adjustable Searchlight: The searchlight component can be adjusted.
維護
To ensure the longevity and smooth operation of your UGEARS Mini Helicopter, follow these maintenance guidelines:
- 潤滑： Periodically apply paraffin wax to all moving gears, axles, and connections as indicated in the assembly instructions. This reduces friction and ensures smooth mechanical action.
- 打掃： Dust the model regularly with a soft, dry cloth. Avoid using water, chemical cleaners, or abrasive materials, as these can damage the wood.
- 貯存： Store the model in a dry environment away from direct sunlight, high humidity, and extreme temperature fluctuations. These conditions can cause the wood to warp or crack.
Image: The completed UGEARS Mini Helicopter model resting on its display stand, ready for showcasing.
故障排除
Model Not Moving Smoothly or Rotors Not Spinning
- 檢查摩擦力： Ensure all gears and moving parts are adequately waxed. Reapply paraffin wax to any areas that appear stiff or are causing resistance.
- 零件對齊： Verify that all parts are correctly aligned and that no pieces are binding or rubbing against each other. Refer to the instruction booklet for precise placement.
- 連接鬆脫： Confirm that all connections are secure. However, avoid forcing parts together too tightly, as this can also impede movement.
Parts Breaking During Assembly
- 溫和處理： Wooden parts, especially thin tabs, can be delicate. Apply gentle, even pressure when detaching pieces from the sheets and during assembly.
- Sanding Tight Fits: If a connection feels too tight, lightly sand the connecting tabs with the provided sandpaper. Do not sand excessively, as this can result in a loose fit.
規格
| 特徵 | 細節 |
|---|---|
| 品牌 | 優格斯 |
| 型號 | 70225 |
| 材料 | 工程木材（膠合板） |
| 件數 | 167 |
| 集合時間 | 約3小時 |
| 推薦年齡 | 14+ years (Manufacturer Minimum Age: 168 months) |
| 操作模式 | Manual (Rubber band motor) |
| 組裝尺寸（長 x 寬 x 高） | 9.9 英吋 x 4.5 英吋 x 11.6 英吋（252 毫米 x 115 毫米 x 295 毫米） |
| 教育目標 | Concentration Skill, Hand-Eye Coordination, Patience Skill, Problem Solving Skill |
Image: A visual representation of the UGEARS Mini Helicopter with its key dimensions labeled: Length 9.9 inches (252 mm), Width 11.6 inches (295 mm), and Height 4.5 inches (115 mm).
保固和支持
UGEARS provides a manufacturer's warranty for this product. For specific warranty details or technical support, please refer to the contact information provided in your product packaging or visit the official UGEARS web地點。
線上資源： For additional assembly tips, frequently asked questions (FAQs), and customer service, visit the official UGEARS web地點： ugearsmodels.com網站.