DJXFLI Moving Head Stage Light with Halo Beam User Manual

一、簡介

This manual provides detailed instructions for the safe operation, installation, and maintenance of your DJXFLI Moving Head Stage Light with Halo Beam. This device is designed for professional stage lighting applications, offering versatile lighting effects with its 8x15W RGBW 4-in-1 LED beams and 96x0.3W 5050 RGB 3-in-1 halo effects. Please read this manual thoroughly before use to ensure proper function and to prevent damage.

圖 1.1：結束view of the DJXFLI Moving Head Stage 光。

This image displays the DJXFLI Moving Head Stage 燈光，展示asing its spherical head with multiple LED lenses and a halo effect, mounted on a sturdy base. The background illustrates various colorful light beams and patterns projected by the unit.

2. 安全訊息

• 電氣安全： 確保電源電壓tage matches the device's requirements (120 Volts AC). Always connect to a grounded outlet. Disconnect power before cleaning or servicing.
• 熱管理： The unit generates heat during operation. Ensure adequate ventilation and maintain a minimum distance of 0.20m from flammable materials. The external surface temperature can reach up to 120°C.
• 安裝： Mount the light securely using appropriate hardware. Ensure the mounting surface can support the weight of the fixture (approximately 10.38 pounds).
• 眼睛保護： 避免眼睛直接接觸光源，因為光線可能很強。
• 水分： 請勿將設備暴露在雨中或受潮。
• 維修： 請勿自行嘗試維修設備。所有維修工作應交給合格人員。

3. 包裝內容

打開包裝後，請確認以下所有物品是否齊全且完好無損：

• 1 x Football Moving Head Light 8x15W
• 1 條電源線
• 1 條 DMX 電纜
• 1 x 使用者手冊（本文檔）
• 1 x Bow mount
• 2 x Screws for bow mount installation

4. 產品結束view

The DJXFLI Moving Head Stage Light features a robust design with advanced lighting capabilities.

4.1 關鍵部件

• LED燈amp 珠子： Equipped with 8 pieces of 15W RGBW 4-in-1 LEDs for powerful beam effects and 96 pieces of 0.3W 5050 RGB 3-in-1 LEDs for halo effects.
• Moving Head: Allows for 540° pan (X-axis) and 360° tilt (Y-axis) unrestricted rotation, enabling dynamic light movement.
• 控制面板： Features an LCD display and buttons (MENU, UP, DOWN, ENTER) for mode selection and parameter adjustment.
• 連接性： DMX IN/OUT ports for DMX512 control, power input, and a built-in microphone for sound-activated mode.
• 冷卻系統： Integrated high-power cooling fan and large cooling window to ensure optimal heat dissipation and extend product lifespan.

Image 4.1: Close-up of the LED lamp beads and halo effect.

This image highlights the individual LED lamp beads and the surrounding halo effect on the moving head. It specifies the light source as 8 pieces of 15W RGBW 4-in-1 LEDs and 96 pieces of 0.3W 5050 RGB 3-in-1 LEDs for the halo.

圖 4.2：詳細信息 view of the control panel and rear connectivity.

這張圖片清晰地展現了這一點。 view of the light's base, showing the LCD display, MENU, UP, DOWN, and ENTER buttons, the microphone (MIC), DMX IN/OUT ports, power input, and the cooling fan. A warning label regarding minimum distance from flammable materials is also visible.

5. 設定

5.1 安裝

The DJXFLI Moving Head Stage Light can be mounted on a truss, ceiling, or placed on a flat surface.

1. 表面放置： Ensure the surface is stable and level. The unit features four foot pads to prevent damage to the bottom.
2. Truss/Ceiling Mount:
   • Attach the provided bow mount to the bottom of the fixture using the two screws.
   • Securely fasten the bow mount to a truss or ceiling structure using appropriate clamps (not included) and safety cables (not included).
   • Always ensure secondary safety attachment for overhead installations.

5.2 電源連接

Connect the provided power cable to the power input port on the rear of the fixture and then to a grounded 120V AC power outlet.

5.3 DMX 連接（可選）

For DMX control, connect a DMX controller to the DMX IN port using the provided DMX cable. For multiple units, daisy-chain them by connecting the DMX OUT of the first unit to the DMX IN of the next.

6. 操作模式

The DJXFLI Moving Head Stage Light offers four primary control modes, selectable via the control panel.

Image 6.1: Icons representing DMX, Sound, Auto, and Master/Slave control modes.

This series of images displays the graphical icons used to represent the four available control modes: DMX, Sound Activated, Automatic, and Master/Slave. These icons are typically found on the product's display or in its menu system.

6.1 自動模式

In Automatic mode, the fixture runs through pre-programmed light shows and movement patterns without external input. Use the MENU and UP/DOWN buttons to select different automatic programs.

6.2 聲控模式

The built-in microphone detects ambient sound, and the light effects synchronize with the music beat. Adjust sensitivity via the control panel if available.

6.3 DMX512 模式

For professional control, connect the fixture to a DMX512 controller. This mode allows precise control over pan, tilt, color, strobe, and other effects. Refer to Section 7 for DMX channel details.

6.4 主/從模式

Connect multiple fixtures via DMX cables. Set one unit as the "Master" and others as "Slave" units. The slave units will mimic the master's movements and effects, creating synchronized light shows without a DMX controller.

Image 6.2: Multiple DJXFLI Moving Head Stage Lights creating dynamic light beams.

This image shows several DJXFLI Moving Head Stage Lights arranged in a row, projecting various colored beams and patterns across a dark space, demonstrating their synchronized operation, possibly in Master/Slave or DMX mode.

7.DMX控制

The DJXFLI Moving Head Stage Light utilizes DMX512 protocol for advanced control. The fixture typically operates with 16 DMX channels, allowing granular control over various functions.

7.1 DMX通道分配（例如）ample）

Note: Specific channel functions may vary slightly. Refer to the on-screen display for exact channel mapping.

To set the DMX address, use the MENU, UP, DOWN, and ENTER buttons on the control panel. The display will show the current DMX address.

8、維護保養

8.1 清潔

Regular cleaning helps maintain optimal performance and extends the lifespan of the fixture.

• 清潔前請斷開電源。
• 用柔軟、不起毛的布擦拭外部。
• 對於鏡片，請使用專用的鏡片清潔液和軟布，以免刮傷。
• Periodically clean the cooling fan and vents to ensure proper airflow.

8.2 儲存

不使用時，請將燈具存放在乾燥、無塵的環境中，最好存放在原包裝或保護盒中。

9。 故障排除

10. 規格

Image 10.1: Diagram showing the dimensions of the DJXFLI Moving Head Stage 光。

This image illustrates the physical dimensions of the moving head light, indicating its length, width, and height, along with its pan (X-axis) and tilt (Y-axis) movement ranges.

11. 保固和支持

For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official DJXFLI web網站。請保留購買憑證，以便提出任何保固索賠。