HOMEnhancements LED Motion Sensor Dual Head Flood Light Instruction Manual

1. 安全訊息

請在開始安裝前仔細閱讀並理解所有說明。不遵守這些說明可能會導致觸電、火災或其他危險，造成人身傷害或財產損失。

• 電氣安全： 安裝或維修前，請務必先斷開斷路器或保險絲盒的電源。確保正確接地。如果您對電氣線路有任何疑問，請諮詢合格的電工。
• 戶外使用： This fixture is designed for outdoor use. For optimal performance and weather protection, it must be installed facing downward. Upward installation is not supported.
• 安裝： 確保安裝面結構牢固，能夠承受燈具的重量。
• 溫度： Do not install near heat sources or in areas with extremely high temperatures.

2. 包裝內容

安裝前請確認所有組件齊全：

• LED Motion Sensor Dual Head Flood Light
• 安裝硬體
• 使用說明書

3. 產品結束view

The HOMEnhancements LED Motion Sensor Dual Head Flood Light provides efficient and adjustable outdoor illumination with integrated security features.

圖 1：正面 view of the HOMEnhancements LED Motion Sensor Dual Head Flood Light.

主要特點：

• 高性能： Delivers 1910 Lumens of 3000K warm light using only 20W.
• 運動感測器： Advanced sensor for reliable and responsive illumination upon detecting movement.
• 節能： Integrated LED technology designed for energy savings.
• 可調式雙頭： 360°可調節燈頭，實現可客製化的照明範圍。
• 耐用且防風雨： Constructed with high-quality metal and an IP65 waterproof rating for outdoor conditions.
• 多功能應用： Suitable for yards, patios, garages, gardens, driveways, and landscapes.

Image 2: Illustration of the 360° adjustable light heads, allowing flexible light direction.

4. 安裝指南

This flood light is designed for hardwired, flush mount installation. It is not battery or solar powered.

安裝步驟：

1. 準備安裝： Disconnect power at the circuit breaker. Ensure the mounting location is suitable for outdoor electrical fixtures.
2. 安裝支架： Attach the mounting bracket to the junction box using the provided hardware.
3. 接線： Connect the fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting live to live, neutral to neutral, and ground to ground. Secure all connections with wire nuts.
4. 安全夾具： Carefully tuck wires into the junction box and secure the fixture to the mounting bracket. Ensure a tight seal to prevent water intrusion.
5. 調整燈頭： Loosen the adjustment knobs on the light heads to direct them to the desired angles. Tighten the knobs once adjusted.
6. 恢復電源： 恢復斷路器供電並測試指示燈。

圖片 3：範例ample of hardwired installation on an exterior wall, highlighting that the product is not battery or solar powered.

5. 操作說明

This flood light features both motion sensing and dusk-to-dawn capabilities, with adjustable settings for customization.

感測器設定：

The motion sensor unit has controls for 'Lux', 'Time', and 'Range', along with operating modes 'On-Time', 'Auto', and 'D2D' (Dusk to Dawn).

圖 4：詳細信息 view of the adjustable settings on the motion sensor unit.

• 勒克斯（光敏性）： Adjusts the ambient light level at which the sensor will activate. Turn towards '+' for activation in brighter conditions, or towards '-' for activation only in darker conditions.
• 時間（持續時間）： Sets how long the light remains on after motion is detected. Adjust from a few seconds to several minutes.
• Range (Detection Distance): Controls the sensitivity and detection area of the motion sensor.

操作模式：

• 準時： The light remains continuously on, overriding sensor functions.
• 汽車： The light activates when motion is detected and the ambient light level is below the set Lux threshold. It stays on for the set 'Time' duration.
• D2D（黃昏到黎明）： The light automatically turns on at dusk and off at dawn, regardless of motion.

Image 5: Visual representation of motion sensor detection and dusk-to-dawn operation.

The fixture also supports control via a remote, as indicated in specifications, though specific remote functions are not detailed here.

6、維護保養

定期維護可確保泛光燈的最佳效能和使用壽命。

• 打掃： 定期用軟布清潔燈具。amp cloth. Do not use abrasive cleaners or solvents. Ensure the sensor lens is clear of dirt and debris for proper operation.
• 檢查： 每年檢查線路和安裝情況，看是否有磨損、損壞或鬆動的跡象。
• LED指示燈： The integrated LEDs are designed for long-lasting performance and are not user-replaceable.

Image 6: The flood light is IP65 water resistant, designed to withstand rain and snow.

7。 故障排除

如果您的泛光燈出現問題，請參考以下常見解決方法：

• 燈不亮：
  • 檢查斷路器，確保電源已接通。
  • 檢查所有線路連接是否牢固。
  • Ensure the 'Lux' setting is appropriate for current ambient light conditions.
  • Check if the operating mode is set to 'Auto' or 'D2D' if automatic operation is desired.
• 指示燈持續亮著：
  • Ensure the operating mode is not set to 'On-Time'.
  • Check if the 'Time' setting is too long.
  • Verify there is no continuous motion within the sensor's detection range.
• 運動感測器未偵測到：
  • Clean the sensor lens to remove any obstructions.
  • Adjust the 'Range' setting to increase sensitivity.
  • Ensure the 'Lux' setting allows activation in current light conditions.
  • Confirm the sensor is not blocked by objects or structures.

8. 規格

Image 7: Detailed product dimensions of the flood light fixture.

9. 保固和支持

This HOMEnhancements product comes with a 1 年有限保固。本保固涵蓋正常使用情況下的材料和工藝缺陷。

For warranty claims, technical support, or any questions regarding your product, please contact HOMEnhancements customer service. Refer to the product packaging or the official HOMEnhancements web本網站提供最新的聯絡資訊。