MATIHUNO TC06 Neck Air Conditioner User Manual

一、簡介

The MATIHUNO TC06 Neck Air Conditioner is a portable, wearable device designed to provide personal cooling and heating. Featuring a triple-core semiconductor cooling system and a powerful fan, it offers efficient temperature regulation for various environments. This manual provides detailed instructions for the safe and effective use of your device.

Figure 1.1: The MATIHUNO TC06 Neck Air Conditioner, a portable device for personal cooling and heating.

2. 安全訊息

請在使用本產品前仔細閱讀所有安全警告和說明，以防止受傷或損壞。

• Do not disassemble, repair, or modify the device. Unauthorized modifications may cause malfunction or electric shock.
• Keep the device away from water and other liquids. Do not use in wet environments.
• 避免將設備長時間暴露在陽光直射或高溫環境下。
• 請勿將異物插入進氣口或出氣口。
• Ensure the charging cable is properly connected and disconnected to prevent damage to the port.
• 請將其放在兒童和寵物接觸不到的地方。
• If the device malfunctions or emits smoke/unusual odors, immediately stop use and disconnect power.

3. 包裝內容

確認包裹內所有物品齊全：

• MATIHUNO TC06 Neck Air Conditioner (1 unit)
• USB Type-C 充電線（1 條）
• 用戶手冊（本文檔）

4. 產品結束view

Familiarize yourself with the components of your MATIHUNO TC06 Neck Air Conditioner.

Figure 4.1: Intelligent Digital Display and Control Buttons.

• 數字顯示： 顯示目前模式和電池電量。
• 電源按鈕： Long press to power on/off. Short press to control fan speed.
• 冷卻按鈕： Adjusts cooling levels (C1/C2/C3).
• 加熱按鈕： Adjusts heating levels (H1/H2/H3).
• 冷卻板： Semiconductor cooling elements that provide direct cooling to the neck.
• 出風口： Direct airflow for fan function.
• USB-C 充電埠： 用於為設備充電。

Figure 4.2: Illustration of the cooling, heating, and air supply mechanisms.

5. 設定和充電

5.1 初始費用

Before first use, fully charge the device. The digital display will indicate the battery level.

1. 將提供的 USB Type-C 連接線連接到裝置的充電埠。
2. 將電纜的另一端連接到相容的 USB 電源轉接器（建議使用 5V/2A，不包含在內）。
3. The digital display will show charging progress. A full charge typically takes approximately 2.5 hours.

Figure 5.1: The device features multiple battery protection mechanisms including anti-over-voltage, anti-overcurrent, anti-leakage, anti-discharge, and no heat generation during operation.

6. 操作說明

6.1 電源開關

To power on the device, long press the Power Button. Long press again to power off.

6.2 風扇操作

After powering on, short press the Power Button to cycle through fan speeds. There are three fan speed levels (1, 2, 3) indicated on the digital display.

6.3 冷卻功能

Press the Cooling Button (snowflake icon) to activate the cooling function. Each press cycles through three cooling levels (C1, C2, C3). The cooling plates will become cold, providing direct cooling to your neck.

Figure 6.1: The device's cooling technology effectively reduces body temperature, as shown by thermal imaging before and after use.

6.4 加熱功能

Press the Heating Button (wave icon) to activate the heating function. Each press cycles through three heating levels (H1, H2, H3). The heating plates will warm up, providing comfortable warmth to your neck.

Figure 6.2: The device offers a heating function, making it suitable for use in colder conditions.

6.5 配戴設備

The MATIHUNO TC06 is designed for comfortable wear around the neck. Its ergonomic design ensures a secure fit during various activities.

Figure 6.3: The ergonomic design ensures comfortable and stable wear, even during movement.

7. 維護和保養

妥善保養可確保設備的使用壽命長久且性能最佳。

• 打掃： 請用柔軟的乾布擦拭設備。請勿使用研磨性清潔劑或將其浸入水中。
• 貯存： 不使用時，將設備存放在陰涼、乾燥的地方，避免陽光直射。
• 通風口： Periodically check and gently clean the air inlets and outlets to ensure unobstructed airflow.

8。 故障排除

如果您的裝置出現問題，請參考以下常見問題及解決方法：

9. 規格

10. 保固和支持

For warranty information or technical support, please contact MATIHUNO customer service through the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.

For further assistance, you may also refer to the official MATIHUNO website or contact their support channels if available.