1Mii B06T6

1Mii 藍牙 5.2 發射器（型號：B06T6）使用手冊

For TV to 2 Wireless Headphones, Long Range Bluetooth Adapter

介紹

The 1Mii B06T6 Bluetooth Transmitter is designed to enable non-Bluetooth devices such as TVs, PCs, and projectors to stream audio wirelessly to Bluetooth headphones or speakers. Featuring the latest Bluetooth 5.2 technology, it ensures a stable and reliable connection. This adapter supports various audio inputs including Optical, AUX, and RCA, offering flexibility for different setups. It also includes volume control and dual link functionality, allowing two Bluetooth headphones to connect simultaneously for shared listening experiences without disturbing others. The aptX Low Latency codec minimizes audio delay, ensuring synchronized sound for movies and games.

1Mii B06T6 Bluetooth Transmitter device

Figure 1: 1Mii B06T6 Bluetooth Transmitter

盒子裡有什麼

打開包裝後，請檢查所有零件是否齊全且完好無損：

  • 1Mii B06T6 Bluetooth Transmitter Unit
  • USB電源線
  • 光纜
  • 3.5毫米音訊線
  • 3.5mm 母頭轉 RCA 公頭電纜
  • 使用者手冊
Contents of the 1Mii B06T6 package including the transmitter, various cables, and manual.

圖 2：包裝內容

產品結束view 和連接

The 1Mii B06T6 features a compact design with clearly labeled ports and controls for ease of use.

頂部 view of 1Mii B06T6 Bluetooth Transmitter showing USB, AUX, OPT, SBC, HD, APTX, LL indicators and volume/pairing buttons.

圖 3：頂部面板控制和指示器

The top panel includes indicators for different audio codecs (SBC, HD, APTX, LL) and input types (USB, AUX, OPT). It also features dedicated buttons for pairing two separate Bluetooth headphones and volume control buttons.

後部 view of 1Mii B06T6 Bluetooth Transmitter showing DC IN (USB-C), Optical, AUX, and ON/OFF ports with connection examples to PC and TV.

圖 4：後面板端口

The rear panel provides the following connection ports:

  • 直流輸入（USB-C）： 用於供電。
  • 光學的： 用於來自電視等裝置的數位音訊輸入。
  • 輔助： For analog audio input (3.5mm jack).
  • 開/關： 設備的電源開關。

產品示範影片

影片 1：結束view of the 1Mii B06T6 Bluetooth Transmitter and its features.

設定說明

  1. 電源連接： Connect the 1Mii B06T6 to a power source using the provided USB Power Cable. It is prohibited to use a mobile power supply to power the B06T6.
  2. 音訊輸入連接： Choose one of the following audio input methods based on your device:
    • 光學的： Use the Optical Cable to connect the transmitter to your TV's optical output. Note: For TV optical output, please set the audio format to PCM. Dolby / DTS is not supported.
    • 輔助： Use the 3.5mm Audio Cable to connect the transmitter to your device's 3.5mm audio output.
    • RCA： Use the 3.5mm Female to RCA Male Cable to connect the transmitter to your device's RCA audio outputs.
  3. 開機： Flip the ON/OFF switch on the rear panel to power on the device.
Diagram showing various audio input connections for the 1Mii B06T6 Bluetooth Transmitter.

圖 5：連線選項

操作說明

與藍牙耳機配對

  1. 請確保您的藍牙耳機處於配對模式。
  2. On the 1Mii B06T6, press one of the Bluetooth pairing buttons (labeled with headphone icons) to initiate pairing. The corresponding indicator light will flash.
  3. 配對成功後，指示燈將變為穩定的藍色。
  4. To connect a second pair of headphones, repeat steps 1-3 using the other Bluetooth pairing button.

Note: It is recommended to connect the B06T6 to the headset before turning on the TV, or turn off the Bluetooth of the TV and then put the B06T6 into the pairing mode with the headset. The TV's Bluetooth can interfere with product pairing.

Image showing a person using the 1Mii B06T6 to connect to headphones for private listening.

Figure 6: Easy Pairing and Private Listening

雙連結功能

The B06T6 allows you to connect two Bluetooth headphones simultaneously, enabling shared audio experiences without disturbing others. Simply pair both headphones as described above.

Note: When pairing to two aptX Low Latency (aptX LL) devices simultaneously, the codec would be downgraded to APTX.

Image showing two people sharing audio from a TV using two headphones connected to the 1Mii B06T6.

Figure 7: Dual Link for Shared Audio

音量控制

Use the '+' and '-' buttons on the top panel of the B06T6 to adjust the audio volume directly from the transmitter.

aptX Low Latency Support

The B06T6 supports aptX Low Latency (aptX LL) to minimize audio delay, providing perfect sound and image synchronization for watching movies or playing games.

Note: To achieve low latency, it is essential that your receiving device (headphones/speakers) also supports aptX Low Latency. If not, you may experience a noticeable audio delay.

Image showing a person playing a video game with headphones, highlighting crystal clear sound without lip-sync delay due to aptX Low Latency.

Figure 8: Crystal Sound with aptX Low Latency

維護

To ensure the longevity and optimal performance of your 1Mii B06T6 Bluetooth Transmitter, follow these maintenance guidelines:

  • 用柔軟的乾布擦拭設備，保持清潔。避免使用研磨性清潔劑或溶劑。
  • 將設備存放在陰涼乾燥處，避免陽光直射和極端溫度。
  • Protect the ports from dust and debris when not in use.
  • Handle cables and connections gently to prevent damage.

故障排除

If you encounter issues with your 1Mii B06T6, please refer to the following common problems and solutions:

問題可能的原因/解決方案
Cannot connect/pair headphones.
  • Ensure your headset or speaker's Bluetooth is not connected to any other device. Disconnect from previously connected devices.
  • Make sure the B06T6 is in pairing mode (flashing indicator light).
  • Try turning off your TV's Bluetooth before putting the B06T6 into pairing mode, as TV Bluetooth can interfere.
  • Ensure the headphones are also in pairing mode.
Audio delay/lip-sync issues.
  • To achieve true low latency, both the B06T6 transmitter and your receiving device (headphones/speakers) must support aptX Low Latency.
  • If connecting to two aptX LL devices, the codec may downgrade to standard aptX, which has slightly higher latency.
No sound or poor sound quality via Optical.
  • For TV optical output, ensure you set the audio format to PCM in your TV's audio settings. Dolby / DTS formats are not supported by the B06T6.
  • 檢查所有電纜連接是否牢固。
設備未開機。
  • Ensure the USB power cable is securely connected to both the B06T6 and a stable power source (e.g., TV USB port, wall adapter).
  • It is prohibited to use a mobile power supply to power the B06T6.

規格

特徵細節
型號B06T6
藍牙版本5.2
連接技術藍牙
音頻輸入光纖、AUX (3.5mm)、RCA、USB
支援的編解碼器aptX Low Latency, aptX HD, aptX Adaptive, SBC
雙鏈路支援Yes, connects to 2 headphones simultaneously
音量控制Yes, on device
電源有線電源（USB-C）
產品尺寸0.79吋長 x 2.36吋寬 x 1.97吋高（20 x 60 x 50毫米）
物品重量5.3 盎司（150 克）

安全資訊

請閱讀並遵守以下安全準則，以防止設備損壞或人身傷害：

  • Do not use a mobile power supply to power the device. Use only the provided USB cable with a compatible power adapter or TV USB port.
  • Ensure your headset is disconnected from any previously connected device before attempting to pair with the B06T6.
  • Avoid exposing the device to high temperatures, humidity, or direct water contact.
  • 請勿嘗試拆卸或改裝設備。否則將導致保固失效並可能造成損壞。
  • 請將本品放在兒童接觸不到的地方。

保固和支持

1Mii products come with a standard warranty. For detailed warranty information, please refer to the warranty card included in your package or visit the official 1Mii web地點。

如果您有任何疑問、需要技術支援或需要回報問題，請聯絡我們的客戶服務團隊：

Our professional customer service team is dedicated to providing friendly service and quick solutions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.