介紹
This manual provides detailed instructions for the setup, operation, and maintenance of your SmallRig T-10 Aluminum Camera Tripod and Monopod. Please read thoroughly before use to ensure optimal performance and safety.
包裝內容
- Tripod (without head) x 1
- 提包x 1
- Alen Wrench x 3
- 說明書×1
- Stainless Steel Foot Screw x 3
設定和操作
1. 架設三腳架
- 展開腿： Gently pull the tripod legs outwards until they lock into position.
- 調整腿部角度： Each leg features an angle adjustment lock. Press the red button on the leg joint to adjust the leg angle for different terrains or stability requirements.
- 伸直雙腿： Use the quick release flip-locks on each leg section to extend the legs to the desired height. Securely close the flip-locks to ensure stability.
- 調整中軸： Loosen the center column lock knob to extend or retract the center column for additional height adjustment. Tighten the knob firmly once the desired height is reached.
- 安裝攝影機： The tripod features a dual-head screw compatible with 1/4"-20 and 3/8"-16 threaded holes for attaching a video head or camera directly. (Note: Video head and quick release plate are not included).
2. 轉換為獨腳架
One of the tripod legs can be detached and used as a monopod or walking stick. To convert:
- 找到帶有泡沫握把的那條腿。
- 將這條腿從三腳架主體上擰下來。
- Attach your camera or video head directly to the top of the detached leg to use it as a monopod.
Video: Official SmallRig demonstration of the 68" Foldable Aluminum Tripod & Monopod, showcasing its compact design, quick setup, and conversion to a monopod for travel and various shooting scenarios.
3. Low Angle and Macro Photography
The center column can be inverted to allow for low-angle shooting and macro photography. To invert the center column:
- 旋下中心柱底部的掛鉤。
- Fully extend and remove the center column from the tripod body.
- Reinsert the center column upside down into the tripod body and tighten the lock knob.
- Reattach the hook to the inverted column.
特徵
- 1/4"-20 螺紋孔： Three additional 1/4"-20 threaded holes are integrated into the bracket for attaching external accessories such as magic arms, mobile phone holders, monitors, or fill lights.
- 穩定鉤： A hook is located at the bottom of the center column, allowing you to hang a weight (e.g., a camera bag) for increased stability, especially in windy conditions.
- Interchangeable Foot Screws: The tripod comes with stainless steel foot screws that can be interchanged with the standard rubber feet for enhanced grip on soft or uneven surfaces.
規格
| 特徵 | 細節 |
|---|---|
| 產品型號 | T-10 (3983) |
| 產品重量 | 2.42 磅/1.1 公斤 |
| 材料 | Aluminum-magnesium Alloy, Stainless Steel |
| 鎖定類型 | Quick Flip Lock |
| 最大管道直徑 | 23.0毫米 |
| 負載能力 | 11 lbs - 33 lbs / 5 kg - 15 kg |
| 工作高度（最大） | 67.7 英吋/172.0 厘米 |
| 最小工作高度 | 16.14 英吋/41.0 厘米 |
| 腿部節數 | 4 |
| 折疊尺寸 | 16.14 inches (h) |
| 相容設備 | Camera (with 1/4"-20 and 3/8"-16 threaded holes) |
維護
- Regularly clean the tripod legs and joints to prevent dust and debris buildup, which can affect smooth operation.
- Ensure all screws and locks are tightened before and during use to maintain stability.
- 不使用時，請將三腳架存放在便攜包中，並置於乾燥陰涼處。
- 避免將三腳架暴露在極端溫度或腐蝕性物質中。
故障排除
- 不穩定： Ensure all leg sections are fully extended and their flip-locks are securely closed. Verify that the center column lock knob is tightened. Consider hanging a weight from the stability hook for added balance.
- Stiff Leg Movement: Clean any visible dirt or sand from the leg sections and joints. If necessary, apply a small amount of silicone-based lubricant to the moving parts.
- 相機未水平： If using a video head, ensure it is properly mounted and adjusted. The tripod itself provides a stable base, but leveling is typically managed by the attached head.
保固和支持
For warranty information, product support, or to purchase replacement parts, please visit the official SmallRig web請造訪網站或聯絡客服。請保留購買收據作為保固索賠的購買憑證。
SmallRig is committed to providing high-quality accessories and support for content creators worldwide.