INGCO Lithium-Ion Cordless Screwdriver User Manual

介紹

Thank you for choosing the INGCO 8V Lithium-Ion Cordless Screwdriver. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.

Image: The INGCO 8V Lithium-Ion Cordless Screwdriver, shown with its included Li-ion battery, a set of 10 Cr-V bits, a magnetic bit holder, and a canvas storage bag.

重要安全訊息

使用電動工具時務必遵循基本的安全預防措施，以降低火災、觸電和人身傷害的風險。

• 工作區安全： 保持工作區域清潔且光線充足。雜亂或黑暗的區域容易引發事故。請勿在易爆環境中操作電動工具，例如有易燃液體、氣體或粉塵的地方。
• 電氣安全： 避免身體接觸接地表面。請勿將電動工具暴露在雨水或潮濕環境中。
• 人身安全： 務必配戴護目鏡。長時間操作時，請配戴耳塞等聽力保護裝置。著裝得體；避免穿著寬鬆的衣物或配戴首飾。
• 工具使用與保養： 請勿強行使用電動工具。請使用適合您用途的電動工具。在進行任何調整、更換配件或存放電動工具之前，請務必斷開電源插頭和/或電池組。
• 電池組的使用與保養： 請僅使用製造商指定的充電器進行充電。請勿使用已損壞或改裝的電池組或工具。

包裝內容

確認您的包裹含有下列所有物品：

• 1 x INGCO 8V Lithium-Ion Cordless Screwdriver
• 1 個充電器
• 10 x 25mm Cr-V Bits
• 1 個磁性批頭座
• 4 x HSS Drill Bits with Hex Shank (if included in specific model variant)
• 1 個帆布袋
• 1 x 使用者手冊（本文檔）

圖片：詳細 view of the included 10 pieces of 25mm Cr-V bits and the magnetic bit holder, essential accessories for various screwing tasks.

產品結束view

Familiarize yourself with the main components of your INGCO Cordless Screwdriver:

Image: Labeled diagram illustrating the key features of the screwdriver, including the Torque Control ring, LED work light, power switch, rotary direction switch, non-slip silicone grip, power indicator, and deformation control button.

• 1. Torque Control: Adjusts the fastening torque for different applications.
• 2. LED工作燈： 照亮工作區域，提高能見度。
• 3. 開關： 啟動螺絲起子。
• 4. Rotary Direction Switch: Changes the rotation direction (forward/reverse).
• 5. Non-Slip Silicone: 提供安全舒適的握持感。
• 6.電源指示燈： 顯示目前電池電量。
• 7. Deformation Control: Button to rotate the body for different working angles.

規格

設定

為電池充電

1. 確保螺絲起子已關閉。
2. 將充電器連接到標準電源插座。
3. Plug the charger into the charging port on the screwdriver. The power indicator lights will show the charging status.
4. Allow the battery to fully charge before first use. Unplug the charger once charging is complete.

Attaching and Removing Bits

1. Ensure the screwdriver is turned off and the rotary direction switch is in the neutral (locked) position.
2. Insert the desired 1/4 inch hex shank bit firmly into the chuck until it clicks into place.
3. 若要取出鑽頭，向前拉動卡盤環，然後將鑽頭拔出。

操作說明

Turning On/Off and Direction Control

• To turn on the screwdriver, press the main switch. The LED work light will illuminate.
• To select forward rotation (for tightening screws), push the rotary direction switch to the left.
• To select reverse rotation (for loosening screws), push the rotary direction switch to the right.
• For safety, set the rotary direction switch to the center position to lock the tool and prevent accidental activation.

調整扭矩

The screwdriver features 15+1 torque settings, allowing you to adjust the fastening force to prevent over-tightening or damaging screws and materials.

1. Rotate the torque control ring located at the front of the screwdriver to select the desired torque setting.
2. Lower numbers indicate lower torque for smaller screws or softer materials. Higher numbers provide more torque for larger screws or harder materials.
3. The "+1" setting is for maximum torque, suitable for drilling or very tight fastening.

圖片：特寫 view of the torque adjustment ring, highlighting the 15+1 torque settings available for precise control over fastening force.

Deformation Control (90° Rotatable Body)

The screwdriver's body can be rotated 90 degrees to switch between a pistol grip and a straight inline configuration, adapting to different working spaces and angles.

1. 確保螺絲起子已關閉。
2. Locate the black button for deformation control (as shown in the Product Overview 圖）。
3. Press and hold the button, then rotate the body of the screwdriver to the desired position (either pistol grip or straight).
4. Release the button once the body is securely locked in place.

Image: Illustration demonstrating how to rotate the screwdriver's body 90 degrees from a pistol grip to a straight inline position by pressing the black deformation control button, allowing for versatile use in various scenarios.

維護

打掃

• 清潔前務必先斷開充電器。
• 用柔軟的布擦拭工具外部。amp 布。請勿使用刺激性化學物質或研磨性清潔劑。
• 保持通風口暢通，清除灰塵和碎屑，防止過熱。

電池保養與儲存

• Store the screwdriver and battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery to approximately 50% capacity. Avoid storing a fully discharged or fully charged battery for extended periods.
• 長期存放期間，每 3-6 個月充電一次，以保持電池健康。

故障排除

保固單

INGCO products are manufactured to high-quality standards and are guaranteed against defects in materials and workmanship. The specific warranty period and terms may vary by region and product. Please refer to your purchase documentation or contact your local INGCO distributor for detailed warranty information.

This warranty does not cover damage caused by normal wear and tear, misuse, abuse, neglect, unauthorized repairs or alterations, or failure to follow operating instructions.

客戶支援

If you have any questions, require technical assistance, or need to report a problem with your INGCO Cordless Screwdriver, please contact your retailer or the official INGCO customer service in your region.

For more information and to find contact details, please visit the official INGCO web地點： www.ingcotools.com