TRQ Front & Rear Ceramic Premium G-Coated Brake Pad & Rotor Kit (Model BKA11649)

一、簡介

This manual provides essential information for the installation, maintenance, and optimal performance of your TRQ Front & Rear Ceramic Premium G-Coated Brake Pad & Rotor Kit. This kit is designed to restore your vehicle's braking system to original equipment (OE) performance standards. Please read all instructions carefully before proceeding with installation or maintenance.

圖 1.1：結束view of the TRQ Front & Rear Ceramic Premium G-Coated Brake Pad & Rotor Kit, showing all included components.

三、產品組成

The TRQ BKA11649 kit includes the following components:

• (1) Front Ceramic Brake Pad Set with Contact Point Grease & Hardware
• (1) Rear Ceramic Brake Pad Set with Contact Point Grease & Hardware
• (2) Front G-Coated Brake Rotors
• (2) Rear G-Coated Brake Rotors
• (1) 12 oz DOT 3 & 4 Brake Fluid
• (1) 13 oz Non-Chlorinated 50 State Formula Brake Cleaner

Image 2.1: The TRQ Brake Kit as packaged, displaying the box and individual components.

Image 2.2: Front ceramic brake pads with accompanying hardware and grease packet.

Image 2.3: Rear ceramic brake pads with accompanying hardware and grease packet.

3. 安裝指南

Installation of brake components requires mechanical expertise and specialized tools. It is highly recommended that installation be performed by a certified automotive technician. Improper installation can lead to brake system failure and serious injury.

3.1 安裝前檢查

• Verify vehicle compatibility using the provided fitment information. This kit is compatible with specific 1999-2007 Chevrolet and GMC models.
• Inspect all components for shipping damage before beginning installation.
• Ensure you have all necessary tools and safety equipment, including jack stands, wheel chocks, and personal protective equipment.

Image 3.1: A reminder to verify product fitment with your specific vehicle model before installation.

3.2 General Installation Steps (Consult a professional or detailed service manual)

1. 安全地抬起並支撐車輛。卸下車輪。
2. Remove old brake pads and rotors.
3. Clean caliper components and mounting surfaces using the provided TRQ Non-Chlorinated Brake Cleaner.
4. Apply synthetic moly brake grease to contact points as instructed.
5. Install new TRQ G-Coated Brake Rotors and Ceramic Brake Pads.
6. Bleed the brake system and refill with the provided DOT 3 & 4 Brake Fluid as necessary, following vehicle manufacturer specifications.
7. 重新安裝車輪並放下車輛。

圖 3.2：特寫 view of a G-Coated brake rotor during installation, highlighting its design.

4. Post-Installation Performance

After proper installation, your TRQ brake kit is engineered to provide enhanced braking performance and a comfortable driving experience. Key performance characteristics include:

• Quieter Braking: Enjoy a smooth driving experience with brakes designed and tested to ensure superior performance and reduced noise.
• Increased Stopping Power: Upgrade your brakes to ensure safe travels for you and your family.
• 耐腐蝕： Designed with a G-coating to prevent rust and corrosion, extending the life of your brakes.
• 無塵設計： Engineered to dissipate heat more effectively and minimize brake dust accumulation on wheels.

Image 4.1: Visual representation of the performance benefits offered by TRQ brake components.

5. 維護建議

Regular inspection and maintenance are crucial for the longevity and safety of your braking system. While TRQ components are designed for durability, adherence to a maintenance schedule is vital.

• 例行檢查： Periodically check brake pads for wear and rotors for signs of scoring, cracking, or warping. Consult your vehicle's service manual for recommended inspection intervals.
• 煞車油檢查： Monitor brake fluid levels and condition. Replace brake fluid according to your vehicle manufacturer's recommendations, typically every 2-3 years.
• 打掃： The G-coated rotors offer rust protection, but occasional cleaning with appropriate brake cleaner can help maintain performance and appearance.
• 專業服務： For any complex brake system issues or routine servicing beyond basic checks, consult a qualified mechanic.

6. 常見問題排除

If you experience any issues with your braking system after installation, consider the following common troubleshooting steps. Always prioritize safety and consult a professional if you are unsure.

• 煞車噪音（尖叫聲/摩擦聲）：
  • 確保已遵循正確的闖入程序。
  • Verify that all hardware (clips, shims) is correctly installed and lubricated.
  • 檢查煞車片和煞車碟盤之間是否有異物。
• 制動過程中出現振動或脈動：
  • This can indicate warped rotors. While TRQ rotors are designed for durability, severe heat or improper installation/break-in can contribute to warping.
  • Inspect rotors for runout or thickness variation.
• 煞車效率降低：
  • 檢查煞車油液位和狀況。
  • Inspect for air in the brake lines, which would require bleeding the system.
  • Ensure brake pads are properly seated and not contaminated with oil or grease.

For persistent issues or concerns, it is strongly recommended to have your vehicle inspected by a qualified automotive technician.

7. 產品規格

8. 保固和支援訊息

TRQ is committed to providing trusted, reliable quality products. For specific warranty details regarding your brake kit, please refer to the documentation included with your purchase or visit the official TRQ web網站。保固條款通常涵蓋正常使用情況下的製造缺陷和材料缺陷。

8.1 客戶支持

For technical assistance, installation questions, or warranty claims, please contact TRQ customer service. You can often find contact information on the product packaging or the TRQ brand store on Amazon.

TRQ also provides extensive online resources, including step-by-step installation videos tailored to specific vehicle makes and models. These resources can be found on the TRQ website or their official video channels.

Image 8.1: TRQ offers installation videos to assist with the process.