AVENLI Avenli Prompt Set
AVENLI Family Inflatable Swimming Pool
型號使用說明書： Avenli Prompt Set
重要安全訊息
Read and understand all instructions before setting up and using this product. Failure to follow these instructions may result in serious injury or death. Keep this manual for future reference.
- 兒童在泳池內或泳池附近活動時，必須隨時有成人監護。
- 請勿跳入或潛入泳池。
- Ensure the pool is set up on level ground, free of sharp objects.
- Do not overinflate the top ring.
- Empty the pool completely when not in use to prevent water accumulation and potential drowning hazards.
- Keep children away from the drain valve when emptying the pool.
產品結束view
The AVENLI Family Inflatable Swimming Pool is designed for easy setup and enjoyment. It features a durable 3-ply material construction and an inflatable top ring for quick assembly.
Image: The AVENLI Family Inflatable Swimming Pool, a round blue pool with an inflatable top ring, filled with water. The AVENLI logo is visible on the side.
This pool is suitable for families and can hold approximately 956 gallons (3618 liters) of water at 80% capacity. Its dimensions are 10 feet in diameter and 30 inches in height (120"L x 120"W x 30"H).
設定說明
Follow these steps for quick and easy setup of your inflatable swimming pool. The pool can be ready for water in approximately 10 minutes.
- 場地準備： Choose a level, flat area in your backyard, free from sharp objects, debris, or uneven surfaces. Ensure the ground is firm enough to support the weight of the filled pool.
- Unpack and Spread: Carefully unpack the pool from its packaging. Spread the pool out completely on the prepared level ground. Ensure the bottom of the pool is smooth and free of wrinkles.
- 給頂部環充氣： Locate the air valve on the top inflatable ring of the pool. Using an air pump (not included), inflate the top ring until it is firm to the touch but not overinflated. Do not use a high-pressure air compressor.
- 加滿水： Begin filling the pool with water. As the water level rises, the inflatable top ring will float and help the pool walls rise and take shape. Smooth out any remaining wrinkles on the bottom as the pool fills.
- 監測水位： Fill the pool to the recommended fill line, typically indicated on the inside of the pool wall, or to approximately 80% capacity (956 gallons / 3618 liters). Do not overfill.
Image: A visual guide showing the three main steps for setting up the pool: A) Inflating the top ring, B) Smoothing the bottom as water fills, and C) The pool fully set up and ready.
Image: The blue inflatable pool set up in a lush green backyard, demonstrating a suitable environment for placement.
泳池營運
Once set up and filled, your AVENLI inflatable pool is ready for use. Always ensure proper supervision, especially when children are present.
- 水質： Maintain proper water chemistry for hygiene and longevity of the pool material. Consult a local pool supply store for recommended chemicals and testing kits.
- Filter Pump (Optional): This pool is designed to accommodate an optional filter pump (not included). If you choose to use one, connect it according to the pump manufacturer's instructions using the 32mm connections provided on the pool.
- 監督： 絕對不要讓兒童在泳池內或泳池周圍無人看管。
Image: A family of five, including adults and children, enjoying the blue inflatable swimming pool, demonstrating typical use.
維護
Regular maintenance will extend the life of your pool and ensure a clean swimming environment.
- 打掃： Regularly remove debris from the water surface and bottom. Use a soft brush or pool vacuum designed for inflatable pools if necessary.
- 水處理： Follow guidelines for water treatment to prevent algae growth and maintain sanitation.
- 排水池： When it's time to empty the pool, locate the drain valve at the bottom side of the pool. Connect a garden hose to the drain valve adapter (included) to direct the water away from your property. Open the valve to allow the water to drain completely.
- 貯存： After draining, clean and thoroughly dry the pool before folding it for storage. Store in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
圖片：特寫 view of the pool's drain valve with a garden hose adapter and the 32mm connections for an optional filter pump, illustrating key maintenance points.
故障排除
This section addresses common issues you might encounter with your inflatable pool.
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 泳池頂部環漏氣 | Air valve not sealed properly, puncture in top ring. | Ensure valve cap is securely closed. Inspect the ring for punctures; use a vinyl repair kit (not included) if a small hole is found. |
| 水位下降asin快速 | Leak in pool liner, drain valve not fully closed. | Check the drain valve for a secure seal. Inspect the pool liner for punctures, especially on the bottom and lower sides. Use a vinyl repair kit for small leaks. |
| Pool not standing upright when filling | Ground is not level, top ring not sufficiently inflated. | Ensure the pool is on a completely level surface. Inflate the top ring more firmly, but do not overinflate. |
規格
Detailed specifications for the AVENLI Family Inflatable Swimming Pool, Model Avenli Prompt Set.
| 特徵 | 細節 |
|---|---|
| 品牌 | AVENLI |
| 型號 | Avenli Prompt Set |
| 產品尺寸 | 120"L x 120"W x 30"H (10 ft x 30 inches) |
| 形狀 | 圓形的 |
| 顏色 | 藍色的 |
| 材料 | Polyvinyl Chloride (PVC) - 3-ply material |
| 水容量 | 956 gallons (3618 Liters) at 80% capacity |
| 包含的組件 | Pool, Drain Valve Adapter (Filter Pump not included) |
| 需要組裝 | 是的 |
| 特別報道 | Inflatable, Puncture Resistant |
| 物品重量 | 17.71磅 |
| 統一產品程式碼 | 650327419544 |
保固和支持
Specific warranty information for this product is not provided within this manual. Please refer to the product packaging or contact AVENLI customer support for details regarding warranty coverage and support services.
For further assistance or inquiries, please visit the official AVENLI website or contact their customer service department. Contact information may be available on the product packaging or through the retailer where the product was purchased.