Primo底部裝水式自消毒飲水機

產品結束view

The Primo Bottom-Loading Self-Sanitizing Water Dispenser provides convenient access to hot and cold water. Its innovative bottom-loading design eliminates the need for heavy lifting, making bottle changes simple and spill-free. The integrated self-sanitizing feature helps maintain water purity and taste.

圖 1：正面 view of the Primo Bottom-Loading Water Dispenser.

主要特點：

• 底部裝載設計： Eliminates lifting, flipping, and spilling of heavy water bottles. Bottles are concealed within the cabinet.
• Self-Sanitizing: Utilizes harmless ozone to automatically sanitize water reservoirs and lines, protecting water purity and taste.
• Dual Temperature Dispensing: Provides instant ice-cold water (cooled to 39.2°F) and piping-hot water (heated to at least 188.5°F).
• 兒童安全鎖： 防止意外流出熱水。
• 不含 BPA 的材料： All materials in contact with dispensed water are BPA-free certified.
• 易於清潔： Features a removable, stainless steel, dishwasher-safe drip tray.
• 環保： Designed for reusable 3 or 5-gallon water bottles, reducing single-serve plastic waste.

重要安全訊息

請在使用本產品前仔細閱讀所有說明。不遵守這些說明可能會導致觸電、火災或嚴重人身傷害。

• 務必將分配器放置在平穩的表面上。
• 請勿使用電源線或插頭損壞的分配器。
• 請將分配器遠離陽光直射和熱源。
• 確保設備周圍通風良好。
• 請勿將分配器、電源線或插頭浸入水或其他液體中。
• 當兒童靠近飲水機時，尤其是供應熱水時，請務必照顧好他們。
• 清潔或進行任何維護之前，請拔掉分配器的電源插頭。

設定指南

1. 開箱及放置：

• 小心地將分配器從包裝中取出。
• 將分配器放置在堅硬、平坦的表面上。確保分配器與牆壁保持至少 4 英吋的距離，以確保良好的通風。
• Do not place the dispenser near direct sunlight or heat-generating appliances.

2. 初步清潔：

• 首次使用前，請用柔軟的布清潔外部。amp 布。
• Remove and wash the drip tray with mild soap and water. Rinse thoroughly and reattach.

3. Water Bottle Installation:

1. 打開分配器下方的櫃門。
2. 取下新的 3 加侖或 5 加侖水瓶的瓶蓋。
3. Insert the probe assembly into the bottle opening. Ensure the probe is fully inserted and the collar is securely seated on the bottle neck.
4. 將水瓶滑入下方的櫥櫃中。
5. 關上櫃門。

圖 2：將 5 加侖水瓶裝入底部隔間。

4. 電源連接：

• 將分配器插入接地的電源插座。
• 首次使用前，請等待約 15-20 分鐘，讓水達到最佳冷熱水溫度。

操作說明

配水：

• Place your cup or container on the drip tray beneath the dispensing spouts.
• 為了 冷水, press the blue button (Figure 3).
• 為了 熱水, first slide the child safety lock (red button) upwards, then press the red button (Figure 3). Release the button to stop dispensing.

Figure 3: Hot and Cold water dispensing buttons with child safety lock.

Figure 4: Dispensing cold water.

Figure 5: Dispensing hot water.

維護

自消毒功能：

The Primo dispenser includes an automatic self-sanitizing feature that uses ozone to clean the internal water lines and reservoirs. This process runs periodically to ensure water quality. No manual intervention is required for this feature.

滴水盤清潔：

• 應定期清空和清潔滴水盤，以防止溢出並保持衛生。
• Simply slide the drip tray out from beneath the spouts.
• Wash with mild soap and water, or place it in the dishwasher.
• Rinse thoroughly and ensure it is dry before reinserting.

一般護理：

• 用柔軟的布擦拭分配器外部。amp 根據需要布。
• 避免使用可能損壞表面的研磨性清潔劑或溶劑。

故障排除

圖 6：背面 view showing power switches for various functions.

規格

圖 7：產品尺寸。

保固和支持

For warranty information or technical support, please refer to the warranty card included with your product or contact Primo customer service directly. Contact details can typically be found on the manufacturer's official web網站或產品包裝上。