一、簡介
Thank you for choosing the V-TAC VT-3450 Wooden Pendant Lamp本手冊提供安全安裝、操作和維護新照明設備所需的重要資訊。請在安裝前仔細閱讀這些說明，並妥善保管以備日後參考。
The V-TAC VT-3450 is a contemporary wooden pendant lamp designed for indoor use. It features an E27 lamp holder and is suitable for various residential and commercial settings.
2. 安全須知
- 安裝、維護或更換燈泡前，請務必斷開電源。
- 安裝工作應由合格的電工依照當地的佈線規範進行。
- 確保卷tage and frequency of the power supply match the specifications of the lamp.
- 不要超過最大功率tag指定燈泡功率為 60W。
- 本產品僅限室內使用。請勿置於潮濕或高濕度環境。
- 確保lamp is securely mounted to a stable ceiling structure.
- 請勿覆蓋 lamp with any material. Allow adequate ventilation.
3. 包裝內容
請檢查包裝，確保所有零件齊全且完好無損：
- 1 x Wooden Pendant Lamp Fixture (shade, cable, ceiling rose)
- 1 x 安裝五金配件包（螺絲、牆錨）
注意：E27燈泡不包含在內，需要單獨購買。
4. 設定與安裝
請依照以下步驟進行安全且正確的安裝：
- 準備： 在進行任何電氣工作之前，請先關閉斷路器處的總電源。
- 標記： Hold the ceiling rose against the ceiling at the desired installation point and mark the drilling positions for the mounting screws.
- 鑽孔： 在標記位置鑽孔。如有必要，插入牆錨。
- 接線： Connect the electrical wires from the ceiling to the terminal block inside the ceiling rose. Ensure correct polarity: Live (L), Neutral (N), and Earth (E).
- Mounting the Ceiling Rose: Secure the ceiling rose to the ceiling using the provided screws.
- 調整電纜長度： If needed, adjust the length of the pendant cable by loosening the cable grip inside the ceiling rose, pulling the cable to the desired length, and then tightening the grip.
- 安裝燈罩： Ensure the wooden shade is securely attached to the lamp 支架組件。
- Inserting the Bulb: 小心地將 E27 燈泡（最大功率 60W）旋入燈座中amp 持有者。
- 最終檢查： 確保所有連線安全可靠。amp is properly mounted. Restore power at the circuit breaker.
Figure 1: Diagram showing the dimensions of the V-TAC VT-3450 Wooden Pendant Lamp, including a diameter of 350mm and a height of 450mm for the shade, and a total cable length of 1000mm.
Figure 2: The V-TAC VT-3450 Wooden Pendant Lamp installed in a modern living room setting.
5. 操作說明
Once installed, the V-TAC VT-3450 pendant lamp operates via a standard wall switch connected to its power supply. Simply toggle the wall switch to turn the light on or off.
這我amp is compatible with dimmable E27 bulbs and a suitable dimmer switch (not included). If using a dimmable bulb and dimmer switch, follow the dimmer switch manufacturer's instructions for operation.
6、維護保養
- 打掃： 清潔 lamp，確保電源關閉且lamp is cool. Wipe gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.
- 燈泡更換： Always turn off the power supply and allow the bulb to cool completely before attempting to replace it. Unscrew the old bulb and screw in a new E27 bulb, ensuring it does not exceed the maximum wattag60W的e。
- 定期檢查： 定期檢查lamp 檢查是否有損壞、連接鬆動或磨損跡象。如果發現任何問題，請斷開電源並諮詢合格的電工。
7。 故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| Lamp 不亮 | 無電源 故障燈泡 接線鬆動 | 檢查斷路器和牆壁開關 更換燈泡 檢查線路（確保電源已關閉） |
| Lamp 閃爍 | 燈泡鬆動 不相容的調光開關/燈泡 接線錯誤 | 擰緊燈泡 Ensure dimmer and bulb are compatible 諮詢合格的電工 |
| Lamp 太熱了 | 燈泡tag太高了 | Replace with a bulb that does not exceed 60W |
8. 規格
| 特徵 | 規格 |
|---|---|
| 品牌 | V-TAC |
| 型號 | 40501 |
| 風格 | 當代的 |
| 材料 | 木頭 |
| 電源 | 電纜 |
| 開關安裝類型 | 單點 |
| 最大瓦特tage | 60瓦 |
| 燈泡底座 | E27 |
| 特別報道 | 可調光（需搭配相容的燈泡和調光器） |
| 產品重量 | 1公斤 |
| 房型 | Dining Room (example） |
9. 保固和支持
有關保固資訊和客戶支持，請參閱您購買時隨附的文件或聯絡您的零售商。請保留您的購買憑證，以便進行任何保固索賠。
If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact a qualified electrician or the V-TAC customer support for assistance.