Alphacool HDX M.2 SSD Cooler M02-110mm Instruction Manual

一、簡介

The Alphacool HDX M.2 SSD Cooler M02-110mm is designed to provide passive cooling for M.2 Solid State Drives. This cooler helps to dissipate heat generated by the SSD, which can contribute to maintaining optimal performance and longevity of the drive. Its compact design ensures compatibility with various system configurations.

2. 安全訊息

• 務必小心處理電子元件，以免損壞。
• 安裝前請確保系統已斷電並拔掉電源線。
• Discharge any static electricity from your body before handling the SSD or cooler components.
• Keep small parts, such as clips, away from children.
• 如果您對任何安裝步驟有疑問，請諮詢合格的技術人員。

3. 包裝內容

請確認您的包裹中是否包含以下所有組件：

• Two (2) Cooling Plates (Aluminium, Black)
• Thermal Pads (various sizes for chips)
• 安裝夾

Image 3.1: Contents of the Alphacool HDX M.2 SSD Cooler package.

4. 設定與安裝

Follow these steps to properly install the Alphacool HDX M.2 SSD Cooler onto your M.2 SSD:

1. 準備固態硬碟： Gently remove your M.2 SSD from its slot or packaging. Ensure the SSD surface is clean and free of dust or debris.
2. 貼導熱墊： Carefully peel the protective film from both sides of the thermal pads. Place the thermal pads directly onto the memory chips and controller chip of your M.2 SSD. Ensure good contact and coverage over the heat-generating components.
3. Position Cooling Plates: Place one cooling plate on top of the thermal pads on the upper side of the SSD. Place the second cooling plate on the underside of the SSD, aligning it with the top plate.
4. 用夾子固定： Use the provided mounting clips to secure the two cooling plates together, sandwiching the M.2 SSD and thermal pads firmly in place. Ensure the clips are securely fastened but do not apply excessive force.
5. 安裝固態硬碟： Carefully re-insert the M.2 SSD with the installed cooler into its designated M.2 slot on your motherboard. Secure the SSD with the motherboard's retaining screw, if applicable.

Image 4.1: Alphacool HDX M.2 SSD Cooler fully assembled on an M.2 SSD.

5.操作

The Alphacool HDX M.2 SSD Cooler is a passive cooling solution. Once installed, it operates continuously without requiring any user intervention or power connection. It works by drawing heat away from the M.2 SSD components through the thermal pads and dissipating it into the surrounding air via the aluminum cooling plates. This passive heat exchange helps to maintain lower operating temperatures for your SSD.

6、維護保養

Minimal maintenance is required for the Alphacool HDX M.2 SSD Cooler:

• 除塵： Periodically inspect the cooling plates for dust accumulation. Use a soft brush or compressed air to gently remove any dust, ensuring optimal airflow around the cooler.
• 打掃： If necessary, wipe the exterior of the cooling plates with a soft, dry, lint-free cloth. Do not use harsh chemicals or abrasive materials.

7。 故障排除

If you experience issues after installing the cooler, consider the following:

• SSD Overheating: Ensure the thermal pads are correctly placed and making full contact with the SSD chips and cooling plates. Verify that the clips are securely fastened to provide adequate pressure.
• 不合適的配合： Double-check that the cooler is correctly aligned with the M.2 SSD and that no components are obstructing its proper seating in the M.2 slot.
• 系統不穩定： If system instability occurs after installation, re-verify all connections and ensure the SSD is properly recognized by the system BIOS/UEFI.

8. 規格

9. 保固和支持

有關保固資訊和技術支持，請參考 Alphacool 官方網站。 web請造訪網站或聯絡您的零售商。請保留您的購買憑證以用於保固索賠。