BEAUTURAL Steam Iron Instruction Manual

重要安全訊息

警告： 本產品不適用於受扶養人及兒童使用。受扶養人使用時，必須由負責任、有能力的成年人監督。

Always unplug the iron from the electrical outlet when filling with water, emptying, or when not in use. Do not leave the iron unattended while it is connected to the power supply.

請勿將熨斗、電源線或插頭浸入水中或其他液體中。

產品結束view

The BEAUTURAL Steam Iron is designed for efficient and safe garment care. It features a ceramic coated soleplate for smooth gliding, a precision thermostat dial, and a 3-way automatic shut-off system for enhanced safety.

圖 1：結束view of the BEAUTURAL Steam Iron.

主要特點：

• Ceramic Coated Soleplate: Non-stick surface for smooth gliding and durability.
• Precision Thermostat Dial: Easily select the correct temperature for various fabric types.
• 3-Way Automatic Shut-Off: Enhances safety by turning off the iron when left idle.
• 自清潔功能： Helps maintain optimal performance and extends iron lifespan.
• 防滴水系統： 低溫下防止漏水。
• 抗鈣系統： Reduces mineral build-up for consistent steam output.

設定和首次使用

首次使用前：

1. 撕掉鞋底上的所有標籤或保護膜。
2. 最初幾次使用時，由於生產過程中殘留的物質燃燒，出現輕微氣味或煙霧是正常現象。這無害，很快就會消失。

給水箱注水：

• 請確保電熨斗已從電源插座拔下。
• 將蒸氣控制設定為“乾熨”位置（無蒸氣）。
• 打開水箱蓋。
• Using the provided measuring cup, carefully pour tap water into the water tank up to the "MAX" fill line. Do not overfill.
• 牢牢關閉水箱蓋。

Figure 2: Filling the water tank of the steam iron.

操作說明

設定溫度：

1. 將熨斗插入合適的電源插座。
2. Turn the precision thermostat dial to the desired temperature setting based on the fabric type. Refer to the fabric guide on the dial or garment care labels.
3. 指示燈亮起，表示熨斗正在加熱。達到設定溫度後，指示燈將熄滅。

蒸汽熨燙：

• 確保水箱已註滿。
• Set the temperature dial to a steam-appropriate setting (usually between "Wool" and "Linen/Cotton"). Steam will not be produced at lower temperatures to prevent dripping.
• 當指示燈熄滅，表示熨斗已足夠熱時，將蒸氣控制旋鈕調至所需的蒸氣量。
• 開始熨燙。

Burst of Steam Function:

• For stubborn wrinkles, press the "Steam Burst" button. A powerful burst of steam will be released.
• 每次噴射之間等待幾秒鐘，讓蒸氣室重新加熱。

立式蒸氣：

• The burst of steam function can also be used for vertical steaming of hanging garments, drapes, or upholstery.
• Hold the iron vertically, about 1-2 inches away from the fabric, and press the "Steam Burst" button.

Figure 3: Using the vertical steam function.

幹熨燙：

• Set the steam control to the "Dry Ironing" position.
• Select the desired temperature using the thermostat dial.
• 指示燈熄滅後，熨斗即可進行乾熨。

自動關閉：

For safety, the iron will automatically turn off if left idle:

• 水平放置或傾倒 30 秒後。
• 如果垂直放置在腳跟支撐上 8 分鐘。

To reactivate the iron, simply move it. The indicator light will illuminate again as it reheats to the set temperature.

Figure 4: Understanding the 3-way automatic shut-off feature.

維護和保養

自清潔功能：

The self-cleaning function helps remove mineral deposits and impurities from the steam chamber. Perform this function regularly, especially if you notice reduced steam output or white flakes.

1. 將水箱加水至“MAX”線。
2. 將電熨斗插上電源，並將溫度旋鈕調到「最高」。
3. 指示燈熄滅後，拔掉電熨斗的電源插頭。
4. 將熨斗水平放在水槽上方。
5. Press and hold the "Self Clean" button. Hot water and steam will be expelled from the soleplate, flushing out impurities.
6. 輕輕左右搖晃熨斗，直到水箱排空。
7. 重新插上電源，加熱烘乾熨斗底板。
8. 冷卻後拔下電源並存放。

清潔底板：

• 確保電熨斗已拔掉電源插頭並完全冷卻。
• 用廣告擦拭底板amp 必要時可用抹布和非研磨性液體清潔劑擦拭。
• Do not use abrasive scouring pads or metal cleaners as they can damage the ceramic coating.

Figure 5: The durable ceramic coated soleplate.

貯存：

• 存放前請務必拔掉電熨斗的電源插頭，並待其完全冷卻後再進行收納。
• 倒空水箱中剩餘的水。
• 將電源線整齊地纏繞在電線收納區（如果有）或用紮線固定。
• 將熨斗垂直放置在後跟支架上存放，以防止底板受損。

故障排除

規格

保固和支持

This BEAUTURAL Steam Iron comes with a Manufacturer Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

For product support, troubleshooting assistance, or warranty claims, please contact BEAUTURAL customer service. You can often find contact information on the official BEAUTURAL web網站或透過您購買產品的零售商。

訪問官方 亞馬遜上的 BEAUTURAL 商店 了解更多資訊和產品。