REPTI ZOO Reptile Terrarium Hygrometer Instruction Manual

1. 產品結束view

The REPTI ZOO Reptile Terrarium Hygrometer is designed to accurately measure the humidity level within various enclosures such as vivariums, hatchers, brooders, and propagators. This device provides real-time humidity readings essential for maintaining optimal environmental conditions for your pets.

主要特點：

• 準確測量： Precisely measures humidity levels in various pet enclosures.
• 易於讀取的錶盤： Features color-coded segments (white for humid, green for moderate, red for dry) for quick and clear interpretation of humidity status.
• 安裝簡單： Equipped with a sticky pad on the reverse side for easy mounting on most surfaces.
• 無電池操作： Operates without batteries, promoting energy efficiency and environmental protection.

圖 1.1：正面 view of the REPTI ZOO Reptile Terrarium Hygrometer, displaying the color-coded humidity dial.

2. 設定與安裝

Follow these steps to properly install your REPTI ZOO Reptile Terrarium Hygrometer:

1. 選擇位置： Select a suitable location within your vivarium or enclosure where humidity measurement is critical. Ensure the location is not directly exposed to water spray or extreme heat sources, which could affect accuracy.
2. 準備表面： Clean the chosen surface thoroughly to ensure it is dry and free of dust or debris. This will ensure optimal adhesion of the sticky pad.
3. 去除保護膜： Peel off the protective film from the sticky pad located on the back of the hygrometer.
4. Mount Hygrometer: Press the hygrometer firmly onto the prepared surface. Hold it in place for a few seconds to ensure secure attachment.

圖 2.1：後部 view of the hygrometer, illustrating the adhesive sticky pad for mounting.

Image 2.2: The hygrometer mounted within a terrarium environment, demonstrating typical placement.

3. 操作說明

The REPTI ZOO Reptile Terrarium Hygrometer operates automatically once installed. No manual calibration or power source is required.

• 讀取濕度： Observe the needle on the dial. The needle indicates the current relative humidity percentage.
• Interpreting Color Zones:
  • Red Zone (0-30%): Indicates a dry environment.
  • Green Zone (30-70%): Indicates a moderate or ideal humidity range for many reptiles.
  • White Zone (70-100%): Indicates a humid environment.
• Adjust your enclosure's humidity levels (e.g., misting, ventilation) based on the readings to meet the specific requirements of your pet.

4、維護保養

To ensure the longevity and accuracy of your hygrometer, follow these simple maintenance guidelines:

• 打掃： Gently wipe the surface of the hygrometer with a soft, dry cloth to remove dust or condensation. Avoid using harsh chemicals or abrasive materials.
• Placement Check: Periodically verify that the hygrometer remains securely attached to its mounting surface.
• 避免浸泡： Do not immerse the hygrometer in water or expose it to excessive moisture, as this can damage the internal mechanism.

5。 故障排除

If you encounter issues with your hygrometer, consider the following:

• 讀數不準確：
  • Ensure the hygrometer is not placed directly under a heat lamp or in a location with poor air circulation, which can skew readings.
  • Verify that the enclosure's humidity is consistent. Large fluctuations can take time for the hygrometer to reflect accurately.
  • If readings appear consistently off, consider cross-referencing with another humidity measuring device if available.
• Falling Off Surface:
  • Ensure the mounting surface was clean and dry during installation.
  • If the sticky pad loses adhesion, it may need to be replaced with a new adhesive suitable for terrarium environments.

6. 規格

7. 保固和支持

REPTI ZOO 提供 12-month quality assurance warranty 對於本產品，自購買之日起。

Should you have any inquiries, concerns, or require assistance regarding your REPTI ZOO Reptile Terrarium Hygrometer, please contact our customer support. We are committed to responding promptly to assist you within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official REPTI ZOO web地點。