介紹
The SOBO WP-607H is an efficient aquarium hanging filter designed to maintain crystal clear water for a healthy aquatic environment. This filter provides comprehensive mechanical, chemical, and biological filtration, making it suitable for both fresh and saltwater aquariums. It is engineered for fully submersible operation, ensuring quiet performance and energy efficiency.
產品特點
- 力量： 12瓦
- 流量： 每小時 600 公升 (L/h)
- Filtration Types: Mechanical, Chemical, and Biological
- Filter Media Included: Sponge for mechanical filtration, activated carbon for chemical filtration, and bio-balls for biological filtration.
- 相容性: 適用於淡水和海水水族箱環境。
- 手術： Fully submersible, designed for super quiet and energy-efficient performance.
- 維護： 易於清潔和維護。
- 設計： Features a 3-in-1 filter media container, an extendable lift tube for varying water levels, and an oil skimmer attachment to remove surface film.
影像： Packaging of the SOBO WP-607H filter, highlighting its key features and internal filtration diagrams.
安全須知
請仔細閱讀並遵守這些安全指南，以防止人身傷害或產品損壞。
- 在對過濾器進行任何維護、清潔或操作之前，請務必中斷電源。
- Ensure the filter motor is fully submerged in water during operation to prevent overheating and damage.
- Do not operate the filter if the power cord, plug, or any part of the unit is damaged.
- Keep the filter and its power cord out of reach of children and pets.
- This product is designed for indoor use only in an aquarium environment.
- Never pull the filter out of the water by its power cord.
包裝內容
安裝前請確認所有組件齊全：
- SOBO WP-607H Filter Unit (Main Body)
- 帶插頭的電源線
- Intake Tube Assembly (including extendable lift tube and intake strainer)
- Filter Media (Sponge, Bio-balls, Activated Carbon)
- Output Nozzle/Spout
- Oil Skimmer Attachment
影像： All individual components of the SOBO WP-607H filter laid out, including the main unit, intake tube, power adapter, and filter media.
設定說明
- 打開包裝並檢查： 小心地從包裝中取出所有部件，並檢查是否有任何損壞。
- 組裝進氣管： Connect the extendable lift tube to the main filter body. Attach the intake strainer to the bottom of the lift tube. If desired, attach the oil skimmer to the intake tube.
- 安裝過濾媒體： Open the filter media container. Place the sponge, activated carbon, and bio-balls into their designated compartments within the filter unit. Ensure they are seated correctly.
- 位置過濾器： Hang the filter unit securely on the rim of your aquarium. Ensure the intake tube is fully submerged in the aquarium water and the filter body is level.
- 預熱過濾器： Before plugging in, manually fill the filter chamber with aquarium water until it is full. This helps to initiate water flow and prevent dry running of the motor.
- 連接電源： Plug the power cord into a suitable electrical outlet. Ensure a drip loop is formed to prevent water from traveling along the cord to the outlet.
影像： The fully assembled SOBO WP-607H hanging filter, ready for installation on an aquarium.
操作說明
- Once plugged in and primed, the filter should begin drawing water and discharging filtered water back into the aquarium.
- Ensure the water level in your aquarium is always above the minimum intake level of the filter to prevent the motor from running dry.
- Monitor the water flow from the output nozzle. A strong, consistent flow indicates proper operation.
- Some models may feature an adjustable flow control. Refer to the diagram on the packaging for its location and operation to maximize or minimize flow output as needed.
維護
定期維護對於確保過濾器的最佳性能和水質至關重要。
- Weekly Cleaning (Sponge): Disconnect power. Remove the filter sponge and gently rinse it in a bucket of old aquarium water (removed during a water change). Avoid rinsing with tap water as chlorine can kill beneficial bacteria.
- Monthly Cleaning (Impeller & Housing): Disconnect power. Carefully remove the impeller from the motor housing. Clean the impeller and its chamber with a small brush to remove any debris or mineral buildup.
- Media Replacement (Activated Carbon): Activated carbon loses its effectiveness over time. Replace the activated carbon media every 2-4 weeks, or as recommended by the media manufacturer.
- 生物球： Bio-balls rarely need cleaning. If they appear excessively dirty, gently rinse them in old aquarium water to preserve beneficial bacteria.
- Intake Tube & Skimmer: Periodically clean the intake tube and oil skimmer to ensure unobstructed water flow.
故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| Filter not starting or no water flow after power cut. | Loss of prime (air in the filter chamber). | Disconnect power, manually fill the filter chamber with aquarium water until full, then reconnect power. |
| 水流量減少。 | Clogged intake strainer, dirty filter media, or obstructed impeller. | Disconnect power. Clean the intake strainer, rinse filter sponge, and inspect/clean the impeller and its chamber. |
| 運轉噪音大。 | Debris in impeller, worn impeller, or improper seating of components. | Disconnect power. Clean the impeller and its shaft. Ensure all components are correctly assembled and seated. |
| Water not clear. | Filter media is saturated or ineffective, or filter is undersized for the aquarium. | Clean or replace filter media as necessary. Ensure regular water changes are performed. |
規格
- 型號： WP-607H (Internal Model: 11015)
- 耗電量： 12瓦
- 最大流量： 600公升/小時
- 產品尺寸（長x寬x高）： 14.9 x 17.4 x 19.3 厘米
- 物品重量： 730克
- 原產地： 中國
保固和支持
For specific warranty information regarding your SOBO WP-607H filter, please refer to the terms and conditions provided by your retailer at the time of purchase. For technical assistance or further inquiries, please contact SOBO customer service or your local distributor.