One For All Universal Remote Smart Control URC7955 User Manual

介紹

The One For All Universal Remote Smart Control URC7955 is designed to simplify your home entertainment experience by consolidating control of up to five devices into a single remote. This manual provides detailed instructions for setting up, operating, and maintaining your universal remote.

產品結束view

The URC7955 remote offers control over various device types, including TVs, Set-Top Boxes (STB), Blu-ray players, and Audio systems. Its smart control features allow for easy setup and personalized functionality.

圖 1：正面 view of the URC7955 Universal Remote, showing all buttons and layout.

圖 2：側面 view of the URC7955 Universal Remote, illustrating its ergonomic design.

設定

1. 電池安裝

The URC7955 remote requires two AA batteries. To install:

1. 打開遙控器背面的電池盒蓋。
2. 裝入兩顆AA電池，注意正負極（+和-）。
3. 關緊電池盒蓋。

2. Device Setup and Programming

The URC7955 can be programmed using a free mobile application or by entering direct codes.

Using the Mobile Application (Recommended)

The One For All mobile app simplifies the setup process by guiding you through device pairing and code transfer via Bluetooth.

1. Download the One For All Setup App from your smartphone's app store.
2. Follow the on-screen instructions in the app to select your device types and brands.
3. The app will transfer the necessary control codes to your URC7955 remote.
4. Test the remote's functionality with your devices.

Figure 3: The URC7955 remote being configured using the dedicated smartphone application.

手動代碼輸入

If the app is not used, you can manually enter 4-digit setup codes for your devices. Refer to the code list provided with your remote or visit the One For All support website for the latest codes.

1. 按住 魔法 按下按鈕直到 LED 指示燈閃爍兩次。
2. Press the device key (e.g., TV, 機上盒) you wish to set up. The LED will light up continuously.
3. Enter the 4-digit setup code for your device brand.
4. If the LED blinks twice and goes out, the code is stored. Test the remote. If the device does not respond, repeat the process with the next code for your brand.

操作遙控器

基本功能

Once programmed, the remote's buttons will control the selected device. Use the device keys (TV, 機上盒, 藍隊, 聲音的, 裝置) to switch between controlling different devices.

• 電源（紅色按鈕）： 開啟或關閉選定的設備。
• 音量（+/-）： Adjusts the volume of the currently selected audio device or TV.
• 頻道（上/下）： Changes channels on the selected TV or STB.
• 數字鍵（0-9）： 用於直接通道輸入或其他數值輸入。
• 導航鍵（上/下/左/右/確定）： 用於菜單導航。
• MENU, GUIDE, INFO, BACK, EXIT: Standard functions for navigating device menus and content.

Activity Control

這 活動 button allows you to control multiple devices simultaneously for a specific activity, such as "Watch TV" or "Watch Movie." This feature can be configured via the mobile app or manual programming to send commands to different devices with a single button press.

學習功能

The URC7955 can learn functions directly from your original remote controls. This is useful for commands not present in the universal remote's code database or for customizing button assignments.

1. Place the URC7955 and your original remote on a flat surface, facing each other, about 1-2 inches apart.
2. 按住 魔法 按下按鈕直到 LED 指示燈閃爍兩次。
3. Press the device key (e.g., TV) you want to learn a function for.
4. Press the button on the URC7955 you wish to program. The LED will blink rapidly.
5. Press and hold the corresponding button on your original remote until the URC7955 LED blinks twice. This indicates successful learning.
6. 對其他按鈕重複此操作或按 魔法 退出學習模式。

巨集函數

The remote supports macro functions, allowing you to program a sequence of up to 15 commands to a single button. This can be configured through the app or manual programming steps detailed in the full manual.

維護

打掃

To clean your remote, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

更換電池

Replace the AA batteries when the remote's response becomes sluggish or the LED indicator blinks unusually. Always replace both batteries at the same time with new ones of the same type.

故障排除

• 遙控器無響應： Check battery installation and ensure batteries are fresh. Point the remote directly at the device.
• 設備無法控制： Verify that the correct device key (e.g., TV, STB) is selected. Re-enter the setup code or try a different code for your device brand. Ensure the remote is within range and there are no obstructions.
• 部分按鈕無法正常運作： If specific buttons do not function, try the learning function to copy them from your original remote. Ensure the device is in the correct mode for the button's function.
• LED indicator issues: Refer to the full manual for specific LED blink patterns and their meanings. A rapidly blinking LED during setup often indicates an issue with code entry or learning.

規格

支援

For further assistance, updated device codes, or troubleshooting not covered in this manual, please visit the official One For All support website or contact their customer service. Support contact information can typically be found on the One For All web站點或產品包裝。

Web地點： www.oneforall.com/support