Manfrotto MK290XTA3-2WUS

Manfrotto 290 Xtra Aluminum 3-Section Tripod Kit with Fluid Video Head (MK290XTA3-2WUS) Instruction Manual

介紹

The Manfrotto 290 Xtra Aluminum 3-Section Tripod Kit with Fluid Video Head (MK290XTA3-2WUS) is a robust and versatile solution for photographers and videographers. This tripod combines solid aluminum construction with enhanced technical functions, offering increased flexibility for creative shooting. It features four leg angle positions and comes equipped with a 2-way fluid video head for smooth and precise camera movements. A dedicated shoulder bag is included for convenient transport.

成分

  • Manfrotto 290 Xtra Aluminum 3-Section Tripod
  • Fluid Video Head (2-way)
  • 快拆板
  • 單肩包

設定

1. 拆箱和初始設置

Remove the tripod from its dedicated shoulder bag. The tripod legs are folded for compact storage.

Manfrotto 290 Xtra Tripod folded for transport

Image: Manfrotto 290 Xtra Tripod in its folded position, ready for transport or storage.

2. Extending Tripod Legs

  1. Grasp the tripod and allow the legs to unfold.
  2. To extend each leg section, open the adjustable aluminum leg locks. Pull the leg section to the desired length.
  3. Close the leg locks firmly to secure the leg sections in place.

3. 調整腿部角度

The 290 Xtra tripod offers four leg angle positions for enhanced flexibility and stability on various terrains.

  1. To change the angle on a leg, close the leg slightly towards the center column.
  2. Press down the locking button "C" located at the top of the leg.
  3. While holding the button down, select the new leg angle and then release button "C" to lock it in position.
  4. The angle of each leg can be adjusted independently. The lowest position allows for ground-level shooting.
Hand adjusting the leg angle of the Manfrotto 290 Xtra Tripod

Image: A hand demonstrating how to adjust the leg angle using the locking button on the tripod.

4. 延長中柱

The center column can be extended to achieve additional height. Loosen the collar lock at the base of the center column, extend the column to the desired height, and then tighten the collar lock firmly.

5. 安裝攝影機

The fluid video head comes with a quick release plate for easy camera attachment.

  1. 確保快裝板牢固地安裝在相機底部。
  2. 將快裝板與液壓雲台上的接收器對齊。
  3. Slide the plate into the receiver until it clicks securely into place. Ensure the safety lock is engaged.
Quick release plate attached to a camera, ready to be mounted on the tripod head

Image: A quick release plate shown attached to the base of a camera, illustrating the mounting mechanism.

操作

1. Fluid Video Head Adjustments

The 2-way fluid video head allows for smooth and precise pan and tilt movements. Use the integrated handle and tension knobs to control the movement and lock the head in desired positions.

Hand adjusting the fluid video head of the Manfrotto 290 Xtra Tripod

Image: A hand manipulating the fluid video head, showing the adjustment points for pan and tilt.

2. 簡易連結附件

The tripod features an Easy Link attachment point, allowing you to connect external accessories directly to the tripod. This can be used for attaching LED lights, reflectors, or other photographic tools to create a mobile studio setup.

Easy Link attachment point on the Manfrotto 290 Xtra Tripod

Image: A close-up of the Easy Link attachment point, highlighting its functionality for external accessories.

3. 穩定鉤

A hook is provided at the bottom of the center column. This can be used to hang additional weight (e.g., a camera bag) to increase the tripod's stability, especially in windy conditions or when using heavy camera setups.

維護

  • Regularly clean the tripod legs and head with a soft, dry cloth to remove dust and debris.
  • 避免使用可能損壞表面的刺激性化學物質或研磨材料。
  • Ensure all locks and mechanisms are free of dirt and operate smoothly.
  • Store the tripod in its shoulder bag in a dry, cool place when not in use.

故障排除

  • 三腳架不穩定性: Ensure all leg locks are fully tightened and legs are spread to an appropriate angle. Consider using the stability hook with added weight.
  • 腿部僵硬部分: Check for any debris in the leg locks. Clean and ensure smooth operation.
  • Head movement not smooth: Verify that all tension knobs on the fluid head are properly adjusted.

規格

ASINB013JS86SW
產品尺寸30.3 x 5.9 x 5.9 英寸
產品型號MK290XTA3-2WUS
物品重量5.6磅
製造商曼富圖
首次可用日期28 年 2015 月 XNUMX 日

保固和支持

有關保固資訊和客戶支持,請參閱曼富圖官方網站。 web請造訪網站或聯絡您當地的零售商。請保留您的購買憑證,以便進行任何保固索賠。

產品結束view 影片

影片:一段誠實的view of the Manfrotto X Pro tripod, highlighting its features and performance.

影片:用戶重新view praising the Manfrotto tripod for its durability, professional feel, and rubbery grip.

相關文件 - MK290XTA3-2WUS

預view Manfrotto MT290DUA3 三腳架:設定、操作和維護指南
本指南全面介紹了 Manfrotto MT290DUA3 三腳架的設定、調整和維護。了解如何伸展支架、調整角度、操作中軸(垂直和水平)、安裝雲台以及進行基本維護。
預view Manfrotto Befree Advanced MKBFRLA4FB-BH 三腳架說明書
本文檔提供了 Manfrotto Befree Advanced MKBFRLA4FB-BH 三腳架的設定、使用和維護的全面說明。它專為高級旅行攝影師設計,可為無反光鏡相機和中片幅數位單眼相機提供便攜性和穩定性。
預view Manfrotto Befree GT 系列三腳架 - 設定、功能和維護指南
Manfrotto Befree GT 系列三腳架 (MTBFRTA4GTFB, MTBFRTC4GTFB) 綜合指南。了解如何設定、調整腳管角度、反轉中軸、安裝配件、折疊、運輸以及維護三腳架,以獲得最佳性能。
預view 曼富圖 MVTTWINFA MVTTWINFC 三腳架使用說明 - 安裝、維護與功能
曼富圖 MVTTWINFA 和 MVTTWINFC 三腳架全面指南。學習如何架設三腳架、調整腳管角度、控制承重、進行維護保養。包含產品特性和安全資訊。
預view Manfrotto MHXPRO-3W XPRO 齒輪三腳架雲台使用說明
Manfrotto MHXPRO-3W XPRO 齒輪三向雲台三腳架頭的詳細說明和設定指南,涵蓋組裝、使用和儲存。
預view 曼富圖 190XPROB 和 055XPROB 三腳架使用手冊
曼富圖 190XPROB 和 055XPROB 相機三腳架綜合使用手冊。學習如何設定三腳架、調整腳管角度、在垂直和水平模式下使用中軸、安裝雲台以及穩定三腳架。包含主要功能和規格。

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.