一、簡介
The Sanitas SEM 44 is a versatile digital electronic muscle stimulation device designed for various applications including muscle toning and regeneration (EMS), pain therapy (TENS), and relaxation massage. This device features 64 preset programs and 6 individually adjustable programs, offering a wide range of treatment options. It operates with 4 adhesive electrodes connected via 2 separate adjustable channels. The integrated display assists with electrode placement for effective application.
This manual provides essential information for the safe and effective use of your Sanitas SEM 44 device. Please read it thoroughly before first use and keep it for future reference.
2. 安全警告
警告：不遵守這些安全說明可能會導致人身傷害或設備損壞。
- Always follow the manufacturer's instructions for use provided in this manual.
- 請勿在靠近水源或潮濕的環境中使用該設備。
- Switch off the device when not in use and remove batteries if storing for extended periods.
- Consult a healthcare professional before use if you have any medical conditions, including but not limited to: cardiac problems, epilepsy, pacemakers, metal implants, skin conditions, or pregnancy.
- Do not apply electrodes to the head, face, front of the neck, or across the chest.
- 請將本品放在兒童接觸不到的地方。
- Do not use on open wounds or damaged skin.
3.產品特點
- 三合一功能： Muscle Toning and Restoration (EMS), Pain Relief (TENS), and Relaxation Massage.
- Electrode System: 4 adhesive electrodes with 2 separate, adjustable channels.
- 節目： 64 pre-set programs for various applications.
- 客製化： 6 individually adjustable programs for personalized treatment.
- 使用者指南： Display shows recommended electrode positions for easy application.
4. 設定
4.1 電池安裝
- 找到設備背面的電池盒。
- 打開電池盒蓋。
- 裝入 3 顆 AAA 電池，注意正負極（+/-）。
- 關緊電池盒蓋。
4.2 連接電極
- Connect the electrode cables to the output sockets on the top of the device.
- Attach the adhesive electrodes to the ends of the cables. Ensure a secure connection.
Figure 1: Sanitas SEM 44 device with connected electrodes. The image shows the compact digital unit with its display, control buttons, and the two cables extending to four adhesive electrode pads.
5. 操作說明
5.1 開關機
- To power on, press and hold the 'ON/OFF' button until the display illuminates.
- 若要關機，請按住「開/關」按鈕，直到顯示器熄滅。
5.2 電極放置
- Clean and dry the skin area where electrodes will be applied.
- Refer to the device's display for recommended electrode positions for your chosen program.
- Apply the adhesive electrodes firmly to the skin. Ensure good contact for optimal performance.
5.3 程序選擇
- Use the 'Program' button to cycle through the 64 pre-set programs.
- For personalized treatment, select one of the 6 individually adjustable programs. Consult the full manual for detailed customization steps.
- The display will show the selected program number and its intended application (EMS, TENS, Massage).
5.4 調整強度
- After selecting a program, use the '+' and '-' buttons for each channel to adjust the intensity of the stimulation.
- Increase intensity gradually until you feel a comfortable, yet effective, sensation. Avoid setting the intensity too high, which may cause discomfort.
- 每個通道都可以獨立調整。
5.5 Session Duration
The device typically has pre-set session durations for each program. Refer to the specific program details in the comprehensive manual for more information. The device will automatically switch off after the session concludes.
6、維護保養
6.1 清潔設備
- Ensure the device is switched off and batteries are removed before cleaning.
- 用柔軟且稍微摩擦力的布擦拭設備amp 布。請勿使用研磨性清潔劑或將設備浸入水中。
- Allow the device to dry completely before reinserting batteries or storing.
6.2 電極護理
- After each use, carefully remove the electrodes from your skin.
- Place the electrodes back on their protective film to preserve their adhesive properties.
- If the adhesive pads lose their stickiness, they may need to be replaced. Replacement pads are available from authorized retailers.
6.3 更換電池
- When the battery indicator on the display shows low power, replace all 3 AAA batteries simultaneously.
- 根據當地法規處理廢舊電池。
7。 故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 設備未開啟。 | 電池沒電或安裝不正確。 | 檢查電池極性，並更換新的AAA電池。 |
| 使用過程中無感覺或感覺微弱。 | Electrodes not properly connected or applied; intensity too low; pads lost adhesiveness. | Ensure electrode cables are fully plugged in. Apply electrodes firmly to clean, dry skin. Increase intensity gradually. Replace old adhesive pads. |
| 設備意外關機。 | Low battery power; session duration completed. | Replace batteries. This is normal if the session duration has ended. |
8. 規格
- 品牌： 薩尼塔斯
- 模型： 掃描電子顯微鏡 44
- 功能： 電肌肉刺激 (EMS)、經皮神經電刺激 (TENS)、按摩
- 通路： 2 (with 4 adhesive electrodes)
- 節目： 64 pre-set, 6 individually adjustable
- 電源： 3 顆 AAA 電池
- 物品重量： 約300克
- 包裝尺寸： 22.6 x 16.4 x 5.6 厘米
- 特色： 無線操作
9. 保固和支持
For warranty information, please refer to the warranty card included with your product packaging or visit the official Sanitas web網站。請保留購買憑證，以便提出任何保固索賠。
For technical support or further assistance, please contact Sanitas customer service. Contact details can typically be found on the manufacturer's web網站或產品包裝中。