介紹
The CEM DT-123 is a compact, handheld device designed for measuring the moisture content in wood. It provides quick and accurate readings, essential for woodworking, construction, and home inspection applications. The meter utilizes two sharp, integrated pins to penetrate the wood surface and determine its moisture level, displayed clearly on an LCD screen.
安全資訊
- Keep the device out of reach of children. The measurement pins are sharp and can cause injury.
- Do not attempt to measure live electrical circuits or materials. This device is not designed for electrical testing.
- 避免將儀表暴露在極端溫度、高濕度或陽光直射下。
- 請勿將設備浸入水或任何其他液體中。
- 如果長時間不使用設備，請取出電池以防止漏液。
- 請僅使用指定的電池類型（9V）。
產品結束view
The CEM DT-123 features a durable casing, an easy-to-read LCD display, and integrated measurement pins. A protective cap covers the pins when not in use.
圖 1：正面 view of the CEM DT-123 moisture meter, highlighting the LCD display and measurement pins.
圖 2：背面 view of the CEM DT-123, showing the battery cover and product markings.
設定
電池安裝
- 確保設備已關閉。
- 找到儀表背面的電池倉蓋（請參閱圖 2）。
- 滑動或打開蓋子即可打開隔間。
- Insert a new 9V battery, observing the correct polarity (+/-) as indicated inside the compartment.
- 牢固地裝回電池盒蓋。
The meter is now ready for operation.
操作說明
- 從測量針上取下保護蓋。
- Press the power button to turn on the meter. The LCD display will illuminate.
- Carefully push the two measurement pins into the wood surface to be tested. Ensure the pins are fully inserted and parallel to the wood grain for accurate readings.
- 讀取水分含量百分比tage directly from the LCD display. The display shows the moisture percentage on the left scale (0% to 44%) and a corresponding value on the right scale (0.2 to 2.0), which may represent a different unit or a relative scale.
- After taking the reading, gently pull the meter out of the wood.
- Press the power button again to turn off the meter. If left idle, the meter may have an auto-off function to conserve battery life.
- Replace the protective cap over the pins for storage.
Figure 3: The CEM DT-123 in use, demonstrating proper pin insertion into wood.
維護
打掃
Wipe the meter's body with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measurement pins are clean and free of debris after each use.
貯存
Store the meter in a cool, dry place, away from direct sunlight and extreme temperatures. Always replace the protective cap over the pins before storage.
故障排除
| 問題 | 可能的原因 | 解決方案 |
|---|---|---|
| 儀表無法開機。 | 電池沒電或安裝不正確。 | 檢查電池極性。更換新的9V電池。 |
| 讀數不準確或波動較大。 | Pins not fully inserted; pins dirty or damaged; measuring wet surface. | Ensure pins are fully inserted. Clean pins. Avoid measuring standing water. |
| Display shows "LO" or low battery indicator. | 電池電量低tage. | 更換9V電池。 |
規格
- 模型： DT-123
- Measurement Range (Wood): 6% 至 44%
- 展示： 液晶顯示器
- 電源： 9V電池（不含）
- 物品重量： 6.4盎司（約181公克）
- 包裝尺寸： 10.5 x 6.4 x 1.8 英吋（約 26.7 x 16.3 x 4.6 公分）
保固和支持
如需了解保固資訊或技術支持，請參閱購買時隨附的文件或直接聯絡製造商。請妥善保管購買憑證，以便進行保固索賠。