旋轉燈 RL48-B

Rotolight RL48-B Stealth HD LED Ringlight User Manual

Model: RL48-B

一、簡介

The Rotolight RL48-B Stealth HD LED Ringlight is a versatile and portable continuous light source designed for both HD cinematography, videography, and DSLR photography. It provides naturally warm, shadowless light with studio-accurate color temperatures. This manual provides essential information for the safe and effective use of your RL48-B.

Rotolight RL48-B Stealth HD LED Ringlight front view

圖 1:正面 view of the Rotolight RL48-B Stealth HD LED Ringlight.

2. 安全訊息

Please read all safety instructions before using the Rotolight RL48-B. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • 請勿將本產品暴露於水或過度潮濕的環境中。
  • 請勿用濕手操作本機。
  • 不要阻塞通風口。
  • Use only specified batteries (3 AA batteries).
  • 請勿拆卸或改裝本設備。所有維修工作應由合格人員進行。
  • 請將本品放在兒童接觸不到的地方。
  • 避免眼睛直接接觸LED燈光。

3. 包裝內容

確認所有物品均在包裝內:

  • 1x Rotolight RL48-B HD LED Ring light
  • Lee 205, 3200 CTO, & 218 CTB filters
  • Lee 209 & 298 neutral density filters
  • Lee 216 Diffusion filter
  • 279 1/8 Minus Green filter
Rotolight RL48-B with included filters

Figure 2: Rotolight RL48-B with a selection of included filters.

4. 設定

4.1 電池安裝

  1. Locate the battery compartment on the rear of the RL48-B unit.
  2. 打開電池盒蓋。
  3. 插入 3 顆 AA 電池,確保極性正確 (+/-)。
  4. 關緊電池盒蓋。
後部 view of Rotolight RL48-B showing battery compartment

圖 3:背面 view of the RL48-B, indicating the battery compartment.

4.2 過濾器安裝

  1. Select the desired Lee filter from the provided kit.
  2. Insert the filter into the designated filter holder slot on the front of the RL48-B.
  3. Ensure the filter is seated properly and securely.

The RL48-B includes a filter-holder for easy attachment of the supplied Lee Filters. These filters allow for adjustment of color temperature (CTO, CTB) and light intensity (Neutral Density), as well as diffusion.

5. 操作

5.1 開關機

To power on the Rotolight RL48-B, locate the power button on the side of the unit and press it. Press again to power off.

5.2 Adjusting Light Output (Dimming)

The RL48-B's light output can be accurately dimmed using the supplied Neutral Density (ND) filters. These filters reduce the light intensity over a range of 1.5 aperture stops. Experiment with different ND filters to achieve the desired brightness.

5.3 調節色溫

The included Lee Filters allow for precise color temperature adjustments:

  • Lee 205, 3200 CTO: Converts daylight (5600K) to Tungsten (3200K) for warmer tones.
  • Lee 218 CTB: Converts Tungsten (3200K) to Daylight (5600K) for cooler tones.
  • Lee 216 Diffusion: Softens the light output.
  • 279 1/8 Minus Green: Corrects for green casts from fluorescent lighting.

Select and insert the appropriate filter based on your desired color temperature and lighting conditions.

5.4安裝選項

The RL48-B offers flexible mounting solutions:

  • Shotgun Microphone Mount: The unit mounts natively over a shotgun microphone.
  • 配件鞋: Using the optional Rotolight stand (sold separately), it can be mounted via an accessory shoe on a camera.
  • Tripod/Lighting Stand: The optional Rotolight stand also allows mounting onto a standard tripod or lighting stand.
  • Rail Support System: Can be integrated into a rail support system with appropriate adapters.
Rotolight RL48-B mounted on a camera with a shotgun microphone

Figure 4: RL48-B mounted on a camera, demonstrating its compatibility with a shotgun microphone.

Photographer using Rotolight RL48-B on camera

Figure 5: The RL48-B in use by a photographer, providing illumination.

6、維護保養

6.1 清潔

  • 用柔軟的乾布擦拭設備外部。
  • 對於頑固污漬,請使用略微粗糙的刷子。amp 用沾有溫和肥皂水的布擦拭,然後擦乾。
  • 請勿使用磨蝕性清潔劑或溶劑。
  • Clean filters gently with a microfiber cloth to avoid scratches.

6.2 儲存

  • Store the RL48-B in a cool, dry place away from direct sunlight.
  • 若長時間不使用本機,請取出電池以防止漏液。

7。 故障排除

問題可能的原因解決方案
燈不亮。電池沒電或電池插入不正確。更換電池時,請更換新的AA電池,並確保極性正確。
燈光輸出太暗。Neutral Density (ND) filter is installed.Remove or replace the ND filter with a lighter one. Ensure batteries are fresh.
Light color appears incorrect.Incorrect color temperature (CTO/CTB) filter installed.Replace the filter with the appropriate CTO or CTB filter for your desired color temperature.
Unit feels warm during operation.正常運轉。This is normal for LED lights. Ensure adequate ventilation and do not cover the unit.

8. 規格

  • 模型: RL48-B
  • LED指示燈: 48 color-accurate LEDs
  • 輸出: Equivalent to 80W tungsten output
  • 色溫: Adjustable via filters (6300K, 5600K, 4100K, 3200K)
  • 調光: Accurate dimming using Neutral Density filters (1.5 aperture stops range)
  • 電源: 3 顆 AA 電池
  • 電池壽命: Approximately 4 hours (with specified batteries)
  • 產品尺寸: 5.51 x 5.51 x 1.57 英寸
  • 物品重量: 6 盎司
  • 製造商: 旋轉燈
  • 全球貿易項目代碼: 05060222850253
邊 view of Rotolight RL48-B

圖 6:側面file of the RL48-B, highlighting its compact design.

9.保修與支持

Rotolight products are manufactured to high standards and come with a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Rotolight web地點。

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Rotolight customer service through their official web網站或產品包裝上提供的聯絡資訊。

Rotolight Official Web地點: www.rotolight.com

© 2023 Rotolight. All rights reserved. Information in this manual is subject to change without notice.